Best Tyger Auto Running Boards for Crew Cab: 15 Spec-Based Picks
As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.
Finding the best tyger auto running boards for crew cab trucks requires checking published specs, not just marketing claims. We compared 15 models to help you choose. The Tyger Auto 3.5" Rider Running Boards lead because their 3.5-inch wide step pad offers a broad, stable surface for Crew Cab Silverado and Sierra owners. This guide uses only listing specifications to rank each option. You will see how width, weight, and material affect daily use. Read on to decide which board fits your truck bed and driving needs.
Quick picks
The best fit for you
- You want the best overall fit for Silverado or Sierra Tyger Auto 3.5" Rider Running Boards This 3.5-inch oval step offers 500 lb capacity with a no-drill install.
- You need a wide step for lifted Nissan Frontier trucks Tyger Auto LanderX Nissan Frontier Crew Cab The 6.38-inch wide triangular design provides a 5-inch drop for easier access.
- You want a simple drop step for Ram 1500 trucks Tyger Auto Access Drop Steps for Ram Crew Cab This 7.24-inch wide drop step offers a sturdy, no-frills solution for daily use.
- You want a classic factory-style aluminum step for Silverado Tyger Auto 6" Riser Running Boards The 6-inch aluminum board is lightweight at 29.6 pounds and rated for 500 lb.
Our 15 picks
Tyger Auto 3.5" Rider Running Boards
Best for: Crew Cab Silverado and Sierra owners
- Cab Size
- Crew Cab (what this guide is about)
- Compatible Vehicle
- 2019-2026 Silverado / Sierra 1500
- Material
- Carbon steel
- Step Width
- 3.5 inch
- Tube Shape
- Oval
- Installation
- No drilling required
These are Tyger Auto 3.5 inch Rider running boards in an oval tube design, built for the Crew Cab Chevy Silverado and GMC Sierra. The 3.5 inch step pad is wider than a single round tube, and the carbon steel body carries an E-coating textured powder finish. Mounting hardware is included and no drilling is required.
Pros
- 3.5 inch oval tube step pad gives a wider stepping surface than single round tube bars
- Carbon steel body with end-to-end E-coating heavy textured powder finish for rust and corrosion protection
- 500 lb weight capacity per the published specs
- No drilling required; all hardware to mount onto the rocker panel is included
- Includes both driver and passenger side running boards
Cons
- Fits Crew Cab only, and is not compatible with 2019 LD or Limited models
- Ground clearance is approximately 12 inches, so it sits close to the rocker panel rather than high and tucked
- Finish is black only, with no other color listed
Good fit if
- You drive a 2019-2026 Silverado or Sierra 1500 Crew Cab, or a 2020-2026 2500 HD / 3500 HD Crew Cab
- You want a wider step pad than a single round tube bar provides
- You prefer a bolt-on install with no drilling into the rocker panel
Skip if
- You have a 2019 LD or Limited model, which this bar does not fit
- You want a step bar with more ground clearance than roughly 12 inches
- You need a color other than black
Verdict: Tyger Auto 3.5" Rider Running Boards pair a wide 3.5 inch oval step pad with a 500 lb capacity and a no-drill install on Crew Cab Silverado and Sierra trucks. They suit you if you want a broad, stable step in a black carbon steel bar.
Tyger Auto Trax 6.3" Side Steps for Silverado Crew Cab
Best for: Crew Cab Silverado and Sierra owners
- Cab Size
- Crew Cab (what this guide is about)
- Material
- carbon steel
- Step Width
- 6.3 inches
- Tube Shape
- dual-tubular
- Installation
- no-drill bolt-on
- Finish
- textured black powder E-coating
View on Amazon: Tyger Auto Trax 6.3" Side Steps for Silverado Crew Cab
The Tyger Auto Trax Side Steps are dual-tubular carbon steel steps with a 6.3-inch step width and a 500 lb weight capacity. They fit Crew Cab Chevy Silverado and GMC Sierra models, including diesel with DEF tanks. The no-drill bolt-on installation uses existing rocker panel points and includes all hardware. If you want a wide, stable step with a textured black finish, this is a strong pick.
Pros
- 6.3-inch step width gives a broad, stable platform for entry and exit.
- 500 lb weight capacity supports a wide range of users.
- No-drill bolt-on installation mounts to the rocker panel with included hardware.
- Dual-tubular carbon steel construction with textured black powder E-coating resists rust and corrosion.
- Fits Crew Cab Chevy Silverado and GMC Sierra 1500, 2500 HD, and 3500 HD, including diesel models with DEF tanks.
Cons
- Only fits Crew Cab models with four full-size doors.
- No remote or powered deployment is listed; these are fixed side steps.
- Ground clearance is approximately 12 inches, which may be lower than some high-clearance alternatives.
Good fit if
- You drive a 2019-2026 Chevy Silverado or GMC Sierra 1500 Crew Cab.
- You want a wide 6.3-inch step and a 500 lb capacity without drilling.
- You prefer a dual-tube design with a textured black finish that resists rust.
Skip if
- You have a Double Cab or Regular Cab truck.
- You need a step with a powered or retractable feature.
- You want the highest possible ground clearance from your side steps.
Verdict: Tyger Auto Trax Dual-Tube Side Steps deliver a wide 6.3-inch step, 500 lb capacity, and no-drill bolt-on installation for Crew Cab Silverado and Sierra owners. The dual-tube carbon steel build with textured black coating is a practical, durable choice.
Tyger Auto LanderX Nissan Frontier Crew Cab
Best for: Lifted Nissan Frontier Crew Cab trucks
- Cab Size
- Crew Cab (what this guide is about)
- Compatible Vehicle
- 2005-2027 Nissan Frontier
- Material
- Carbon steel
- Step Width
- 6.38 inches
- Tube Shape
- Triangular
- Installation
- Bolt-on
The Tyger Auto LanderX running boards are triangular carbon steel side steps for the 2005-2027 Nissan Frontier Crew Cab. They have a 5-inch drop, a 6.38-inch step width, and a 500 lb weight capacity. The textured black powder coat adds rust and corrosion resistance. They suit lifted trucks where easier entry and a distinct look matter.
Pros
- Triangular carbon steel tubing with a 5-inch drop for easier entry and exit
- 6.38-inch step width gives a stable surface for passengers
- 500 lb weight capacity per side
- Dual stage E-coating powder textured black finish improves rust and corrosion resistance
- Bolt-on installation with all hardware and brackets included
Cons
- Only fits Crew Cab models with 4 full-size doors
- No lights or remote listed
- Ground clearance is approximately 8 inches
Good fit if
- You drive a 2005-2027 Nissan Frontier Crew Cab
- You want a 5-inch drop step for easier access
- You prefer a triangular tube look over classic round or oval steps
Skip if
- You have an extended cab or a Crew Cab with fewer than 4 full-size doors
- You need running boards with integrated lights or a remote
- You want a step with more than 8 inches of ground clearance
Verdict: Tyger Auto LanderX Triangular Running Boards give Nissan Frontier Crew Cab owners a 5-inch drop, 6.38-inch wide step, and 500 lb capacity in a triangular carbon steel design. They are a solid choice if you want easier entry and a distinct look without custom wiring.
Tyger Auto LanderX Triangular Running Boards
Best for: Lifted Crew Cab Silverado and Sierra trucks
- Cab Size
- Crew Cab (what this guide is about)
- Material
- Carbon steel
- Step Width
- 6.38 inches
- Tube Shape
- Triangular
- Installation
- Bolt-on, no drilling
- Finish
- E-coating powder textured black
View on Amazon: Tyger Auto LanderX Triangular Running Boards
The Tyger Auto LanderX is a triangular carbon steel running board for Crew Cab Chevy Silverado and GMC Sierra trucks. Its 5-inch drop and 6.38-inch step width give a lower, wider step for lifted trucks. The bolt-on install needs no drilling, and the 500 lb capacity suits daily use. Dual-stage E-coating adds rust and corrosion resistance.
Pros
- 5-inch drop and 6.38-inch step width create a low, wide step for lifted trucks
- Triangular carbon steel tubing with dual-stage E-coating powder textured black finish
- Bolt-on installation with no drilling required; hardware and brackets included
- 500 lb weight capacity and approximately 10 inches of ground clearance
- Fits Crew Cab 2019-2026 Silverado/Sierra 1500 and 2020-2027 2500 HD/3500 HD
Cons
- Only fits Crew Cab with 4 full-size doors
- No remote or lighting features are listed
- Requires confirming vehicle fitment through the Amazon Confirmed Fit tool
Good fit if
- You drive a Crew Cab 2019-2026 Chevy Silverado or GMC Sierra 1500
- You have a lifted truck and want a lower step for easier entry
- You want a bolt-on running board with no drilling required
Skip if
- You have a Double Cab or a cab size other than Crew Cab
- You need running boards with lights or a remote control
- You want a step with less than a 5-inch drop
Verdict: Tyger Auto LanderX 5" Drop Running Boards deliver a low, wide step and heavy-duty triangular carbon steel construction for Crew Cab Silverado and Sierra owners. They are a strong choice if you want a no-drill, high-capacity running board for a lifted truck.
Tyger Auto Access Drop Steps for Ram Crew Cab
Best for: Ram 1500 Crew Cab owners wanting a simple drop step
- Cab Size
- Crew Cab (what this guide is about)
- Material
- 2 inch diameter carbon steel
- Step Width
- 7.24 inches
- Tube Shape
- Tubular
- Installation
- No-drill bolt-on
- Finish
- Textured black
View on Amazon: Tyger Auto Access Drop Steps for Ram Crew Cab
The Tyger Auto Access is a drop-step running board for Crew Cab trucks, built from 2-inch carbon steel with a textured black finish. It offers a 7.24-inch step width, a 500 lb weight capacity, and no-drill bolt-on installation. It suits drivers who want a straightforward, durable step for their Crew Cab pickup.
Pros
- 2-inch diameter carbon steel tube construction
- Textured black finish for corrosion and rust resistance
- 7.24-inch step width for a stable stepping surface
- 500 lb weight capacity
- No-drill bolt-on installation with all hardware included
Cons
- Only fits Crew Cab models, not Quad Cab or Mega Cab
- Not compatible with 2019-2024 Ram 1500 Classic
- No remote or electronic features listed
Good fit if
- You drive a 2019-2027 Ram 1500 Crew Cab (excluding Classic)
- You want a simple, durable drop step with a wide stepping surface
- You prefer a no-drill bolt-on installation you can do yourself
Skip if
- You have a Quad Cab or Mega Cab truck
- You own a 2019-2024 Ram 1500 Classic
- You need powered or retractable running boards
Verdict: Tyger Auto Access Crew Cab Running Boards deliver a sturdy, no-frills step with a wide surface and easy installation. They are a solid choice for Ram 1500 Crew Cab owners who want a reliable, fixed running board.
Tyger Auto Tyger Access Drop Step for Chevy Colorado
Best for: Crew Cab Colorado and Canyon owners wanting a wide drop step
- Cab Size
- Crew Cab (what this guide is about)
- Compatible Vehicle
- 2015-2027 Chevy Colorado/GMC Canyon
- Material
- 2 inch diameter carbon steel
- Step Width
- 7.24 inches
- Tube Shape
- Tubular
- Installation
- No-drill bolt-on
View on Amazon: Tyger Auto Tyger Access Drop Step for Chevy Colorado
The Tyger Access running board is a drop step for Crew Cab Chevy Colorado and GMC Canyon trucks. It uses a 2-inch carbon steel tube with a textured black finish, a 7.24-inch step width, and a 500 lb weight capacity. Ground clearance is about 11 inches. It bolts to the rocker panel without drilling. This suits owners who want a simple, wide step with a straightforward tubular look.
Pros
- Fits 2015-2027 Chevy Colorado and GMC Canyon Crew Cab with four full-size doors
- 2-inch diameter carbon steel tube with textured black finish for corrosion and rust resistance
- 7.24-inch step width and 500 lb weight capacity
- No-drill bolt-on installation with all hardware and brackets included
- About 11 inches of ground clearance
Cons
- Only fits Crew Cab models with four full-size doors
- No remote or lighting features are listed
- Requires confirming vehicle fitment with the Amazon Confirmed Fit tool before purchase
Good fit if
- You drive a 2015-2027 Chevy Colorado or GMC Canyon Crew Cab
- You want a wide drop step with a 500 lb capacity
- You prefer a no-drill bolt-on install that can be done in about 20 minutes
Skip if
- You have an extended cab or a cab that is not a Crew Cab with four full-size doors
- You need running boards with integrated lights or a remote
- You want a step with a different tube diameter or style
Verdict: Tyger Auto Tyger Access Running Boards for Crew Cab give you a wide, no-drill drop step for 2015-2027 Colorado and Canyon Crew Cab trucks. The 2-inch steel tube, 7.24-inch step width, and 500 lb capacity make it a practical everyday option.
Tyger Auto 3.5" Rider Running Boards
Best for: Ram 1500 Crew Cab owners wanting wide steps
- Cab Size
- Crew Cab (what this guide is about)
- Compatible Vehicle
- 2019-2027 Ram 1500 (not 19-24 Classic)
- Material
- polished stainless steel
- Step Width
- 3.5 inches
- Tube Shape
- oval
- Installation
- bolt-on, no drilling required
These Tyger Auto Rider running boards are oval nerf bars with a 3.5-inch step pad, built for 2019-2027 Ram 1500 Crew Cab trucks (not the 2019-2024 Classic). The polished stainless steel tube is seamless for rust protection, and the bolt-on install needs no drilling. They suit you if you want a wide, stable step with a chrome-matching finish.
Pros
- 3.5-inch oval step pad gives a wider surface than single round tubes
- Polished stainless steel tube resists rust and matches chrome trim
- Bolt-on installation with no drilling required
- 500 lb weight capacity and about 9 inches of ground clearance
- Includes both driver and passenger side boards with all hardware
Cons
- Only fits Crew Cab with four full-size doors, not Quad or Mega Cab
- Not compatible with 2019-2024 Ram 1500 Classic
- No lights or remote listed in the specifications
Good fit if
- You drive a 2019-2027 Ram 1500 Crew Cab
- You want a wide 3.5-inch step pad for easier entry
- You prefer a bolt-on install with no drilling
Skip if
- You have a Ram 1500 Quad Cab or Mega Cab
- You own a 2019-2024 Ram 1500 Classic
- You need running boards with integrated lights
Verdict: Tyger Auto 3.5" Rider Running Boards for Ram 1500 Crew Cab give you a wide, stable step with a rust-resistant polished finish and a no-drill install. They are a solid match if your truck is a 2019-2027 Ram 1500 Crew Cab and you want a clean chrome look.
Tyger Auto 3.5" Rider Oval Tube
Best for: Crew Cab Ram trucks needing wide, stable steps
- Cab Size
- Crew Cab (what this guide is about)
- Material
- Stainless steel
- Step Width
- 3.5 inches
- Tube Shape
- Oval
- Installation
- Drilling required for some models
- Finish
- Polished stainless steel
This Tyger Auto running board features a 3.5-inch oval tube design for a wider, more stable step surface. The seamless polished stainless steel construction resists rust and corrosion. It offers a 500 lb weight capacity and mounts to the rocker panel with included hardware. Ground clearance sits at approximately 15 inches. This model fits Crew Cab Dodge Ram trucks from 2009 to 2027.
Pros
- 3.5-inch oval tube provides a wider step pad than round tubes
- Seamless polished stainless steel tube resists dirt, water, and corrosion
- 500 lb weight capacity for heavy-duty use
- Includes all hardware for easy bolt-on installation
Cons
- Requires minor drilling for 2009-2011 and some 2012 models
- Not compatible with Quad Cab or Mega Cab configurations
- Does not fit 5th Gen 2019-up Ram 1500 models
Good fit if
- You drive a Crew Cab Dodge Ram 1500 (2009-2018) or 2500/3500 (2010-2027)
- You want a wider step surface for better stability
- You prefer polished stainless steel to match chrome accents
Skip if
- You own a Quad Cab or Mega Cab Ram
- You have a 5th Gen 2019-up Ram 1500
- You want to avoid any drilling during installation
Verdict: Tyger Auto 3.5" Rider Oval Tube offers a wide, stable step with durable stainless steel construction. It is a solid option for Crew Cab Ram owners who need reliable support and corrosion resistance.
Tyger Auto 6" Riser Running Boards
Best for: Crew Cab Silverado and Sierra trucks
- Cab Size
- Crew Cab (what this guide is about)
- Material
- Aluminum
- Step Width
- 6 in
- Tube Shape
- Triangle
- Installation
- No drilling required
- Finish
- Satin black powder-coating
These are Tyger Auto Riser running boards in a 6-inch width, built from triangle aluminum tubing with a satin black powder-coating. They fit Crew Cab Chevy Silverado and GMC Sierra 1500 trucks, plus 2500 HD and 3500 HD models, and mount to the rocker panel with no drilling. The 500 lb weight capacity and UV-resistant non-slip step pads suit daily driving and weekend use.
Pros
- 6-inch ultra-wide step surface with UV-resistant non-slip step pads
- Heavy-duty triangle aluminum tubing in satin black powder-coating for rust resistance
- Bolt-on installation with no drilling required, all hardware and brackets included
- 500 lb weight capacity with roughly 9 in of ground clearance
- Fits Crew Cab Chevy Silverado and GMC Sierra 1500, 2500 HD and 3500 HD, including diesel models with DEF tanks
Cons
- Fits Crew Cab only, so Double Cab and other cab sizes are not covered
- No lights or remote listed among the features
- Requires you to confirm fitment with the license plate tool before ordering
Good fit if
- You drive a Crew Cab Chevy Silverado or GMC Sierra 1500, 2500 HD or 3500 HD
- You want a wide 6-inch factory-style step rather than a slim tube step
- You prefer a no-drill bolt-on install you can do yourself
Skip if
- You have a Double Cab or any cab size other than Crew Cab
- You want powered or lighted running boards with a remote
- You need a step narrower than 6 inches
Verdict: Tyger Auto 6" Riser Crew Cab Running Boards give Crew Cab Silverado and Sierra owners a wide, no-drill aluminum step rated to 500 lb. They are the pick here for a classic factory-style 6-inch board.
Tyger Auto 3.5" Rider Running Boards for Nissan Frontier
Best for: Frontier Crew Cab owners wanting polished stainless steps
- Cab Size
- Crew Cab (what this guide is about)
- Compatible Vehicle
- 2005-2027 Nissan Frontier
- Material
- stainless steel
- Step Width
- 3.5 inch
- Tube Shape
- oval
- Installation
- bolt-on, no drilling required
View on Amazon: Tyger Auto 3.5" Rider Running Boards for Nissan Frontier
These Tyger Auto Rider running boards are a bolt-on side step set for the 2005-2026 Nissan Frontier Crew Cab. The oval tube gives you a 3.5-inch step pad, wider than a single round tube. Polished stainless steel resists rust and matches chrome trim. The kit includes both sides, all hardware and brackets, and needs no drilling. Rated for 500 lb with about 11 inches of ground clearance.
Pros
- Oval tube design provides a 3.5-inch step pad surface, wider than single round tube steps.
- Polished stainless steel construction with seamless tube structure for rust and corrosion protection.
- Bolt-on installation with no drilling required; both driver and passenger boards plus hardware and brackets included.
- 500 lb weight capacity and approximately 11 inches of ground clearance.
- Backed by a 5-year manufacturer warranty for US customers.
Cons
- Fits only Crew Cab models with four full-size doors; not compatible with other cab sizes.
- Polished stainless steel finish may show dirt and water spots more than a textured black finish.
- No drilling required, but installation still involves bolting brackets to the rocker panel.
Good fit if
- You drive a 2005-2026 Nissan Frontier Crew Cab with four full-size doors.
- You want a wider 3.5-inch step pad than a single round tube provides.
- You prefer a polished stainless steel finish that matches chrome accents.
Skip if
- You have a Nissan Frontier with an extended or king cab rather than a Crew Cab.
- You want a black or textured finish instead of polished stainless steel.
- You need a step surface wider than 3.5 inches.
Verdict: Tyger Auto 3.5" Rider Running Boards for Frontier Crew Cab give you a wide oval step pad, polished stainless steel, and a no-drill bolt-on install for 2005-2026 Frontier Crew Cabs. They are a practical choice if you want a bright finish and a 500 lb capacity.
Tyger Auto Access Drop Step Running Boards
Best for: Crew Cab Silverado and Sierra daily drivers
- Cab Size
- Crew Cab (what this guide is about)
- Material
- 2 inch diameter carbon steel
- Step Width
- 7.24 inches
- Tube Shape
- Tubular
- Installation
- No-drill bolt-on
- Finish
- Textured black
The Tyger Auto Access is a tubular drop step running board for Crew Cab Chevy Silverado and GMC Sierra trucks. The 2 inch carbon steel tube carries a 500 lb capacity, and the 7.24 inch step width gives a broad surface. A textured black finish resists rust. It bolts to the rocker panel without drilling and sits about 10 inches off the ground. This suits you if you want a simple, value-focused step for daily use.
Pros
- 2 inch diameter carbon steel tube with a 500 lb weight capacity
- 7.24 inch step width for a broad stepping surface
- Textured black finish for corrosion and rust resistance
- No-drill bolt-on installation to the rocker panel
- Fits Crew Cab models with four full-size doors
Cons
- Ground clearance is approximately 10 inches, which may be low for some off-road use
- Only fits Crew Cab, not Double Cab or other cab sizes
- No remote or powered operation is listed
Good fit if
- You drive a 2019-2026 Chevy Silverado or GMC Sierra 1500 Crew Cab
- You want a straightforward bolt-on step with no drilling
- You prefer a tubular drop step with a wide 7.24 inch stepping surface
Skip if
- You need running boards for a Double Cab or other cab size
- You want a powered or retractable step
- You need more than 10 inches of ground clearance
Verdict: Tyger Auto Access Drop Step Running Boards offer a practical, no-drill solution for Crew Cab Silverado and Sierra owners who want a wide, sturdy step. The 500 lb capacity and textured black finish make them a solid everyday choice.
Tyger Auto LanderX Triangular Running Boards
Best for: Ram Crew Cab owners needing a 5-inch drop step
- Cab Size
- Crew Cab (what this guide is about)
- Material
- Carbon steel
- Step Width
- 6.38 inches
- Tube Shape
- Triangular
- Finish
- E-coating powder textured black
- Weight Capacity
- 500 lb
View on Amazon: Tyger Auto LanderX Triangular Running Boards
The Tyger Auto LanderX is a triangular carbon steel running board for Crew Cab trucks, with a 6.38-inch step width and a 5-inch drop. The 500 lb weight capacity and textured black powder finish suit daily use. It fits 2009-2018 Dodge Ram 1500, 2010-2027 Ram 2500/3500, and 2019-2024 Ram 1500 Classic Crew Cab, not 5th Gen 2019-up Ram 1500.
Pros
- Triangular carbon steel tubing with a 5-inch drop for easier entry and exit
- 6.38-inch step width and 500 lb weight capacity
- Dual stage E-coating powder textured black finish for rust and corrosion resistance
- Bolt-on installation with all hardware and brackets included
- Fits Crew Cab only, including chassis cab and diesel models
Cons
- Requires minor drilling of 1/4-inch holes through the pinch weld on 2009-2011 and some 2012 models
- Not compatible with Quad Cab, Mega Cab, or 5th Gen 2019-up Ram 1500
- No remote or lighting features listed
Good fit if
- You drive a 2009-2018 Dodge Ram 1500, 2010-2027 Ram 2500/3500, or 2019-2024 Ram 1500 Classic Crew Cab
- You want a 5-inch drop step for lifted trucks or easier access
- You prefer a bolt-on installation with included hardware
Skip if
- You have a Quad Cab or Mega Cab
- You own a 5th Gen 2019-up Ram 1500
- You want to avoid any drilling on 2009-2011 or some 2012 models
Verdict: Tyger Auto LanderX Crew Cab Running Boards offer a sturdy triangular step with a 5-inch drop for Ram Crew Cab owners. They are a practical choice if you need a 500 lb capacity board and can handle minor drilling on older models.
Tyger Auto 3.5" Rider Oval Nerf Bars
Best for: 2015-2026 Colorado/Canyon Crew Cab owners
- Cab Size
- Crew Cab (what this guide is about)
- Compatible Vehicle
- 2015-2026 Chevy Colorado GMC Canyon
- Step Width
- 3.5 inches
- Tube Shape
- Oval
- Installation
- Bolt-on, no drilling required
- Finish
- Textured Black
The Tyger Auto 3.5" Rider Running Boards are oval nerf bars for 2015-2026 Chevy Colorado and GMC Canyon Crew Cab trucks. The 3.5-inch step pad is wider than a single round tube, and the textured black finish resists slips. They bolt on with no drilling, support up to 500 lb, and sit about 11 inches off the ground. This set fits Crew Cab only.
Pros
- 3.5-inch oval step pad is wider than a single round tube for a larger foothold
- Bolt-on installation with no drilling required; all hardware and brackets included
- 500 lb weight capacity per side
- Textured black finish on an oval tube
- About 11 inches of ground clearance
Cons
- Fits Crew Cab only, not extended or regular cab
- No drilling required, but you still need basic hand tools for the bolt-on install
Good fit if
- You drive a 2015-2026 Chevy Colorado or GMC Canyon Crew Cab
- You want a wider step pad than a round tube provides
- You prefer a bolt-on install with no drilling
Skip if
- You have an extended cab or regular cab Colorado or Canyon
- You want a step with a different tube shape or finish
Verdict: Tyger Auto 3.5" Rider Running Boards for Colorado Crew Cab give you a wide oval step, a 500 lb rating, and a no-drill bolt-on fit for 2015-2026 Crew Cab models.
Tyger Auto LanderX Colorado/Canyon Crew Cab
Best for: Lifted Chevy Colorado or GMC Canyon Crew Cab trucks
- Cab Size
- Crew Cab (what this guide is about)
- Compatible Vehicle
- 2015-2027 Chevy Colorado / GMC Canyon
- Material
- Carbon steel
- Step Width
- 6.38 inches
- Tube Shape
- Triangular
- Installation
- Bolt-on
The Tyger Auto LanderX is a triangular carbon steel running board for 2015-2027 Chevy Colorado and GMC Canyon Crew Cab trucks. Its 5-inch drop and 6.38-inch step width help with entry and exit, especially on lifted trucks. The textured black powder coat adds rust resistance. It bolts on with included hardware and supports up to 500 lb.
Pros
- Triangular carbon steel tubing with a 5-inch drop and 6.38-inch step width
- Fits 2015-2027 Chevy Colorado and GMC Canyon Crew Cab with four full-size doors
- Dual stage E-coating powder textured black finish for rust and corrosion resistance
- Bolt-on installation with all hardware and brackets included
- 500 lb weight capacity and approximately 12 inches of ground clearance
Cons
- Only fits Crew Cab models with four full-size doors, not other cab sizes
- No lights or remote listed in the specifications
- Installation requires basic tools and about 20 minutes
Good fit if
- You drive a 2015-2027 Chevy Colorado or GMC Canyon Crew Cab
- You want a running board with a 5-inch drop for easier entry and exit
- You prefer a bolt-on installation with included hardware
Skip if
- You have a different cab size or vehicle model
- You need running boards with integrated lighting or a remote
- You want a step with a larger drop than 5 inches
Verdict: Tyger Auto LanderX Triangular Running Boards offer a durable triangular carbon steel design with a 5-inch drop and 6.38-inch step width for 2015-2027 Chevy Colorado and GMC Canyon Crew Cab trucks. They are a solid choice for lifted trucks that need easier cabin access.
Tyger Auto 3.5" Rider Oval Running Boards
Best for: Wide oval steps on older Silverado Crew Cabs
- Cab Size
- Crew Cab (what this guide is about)
- Material
- Carbon steel
- Step Width
- 3.5 inches
- Tube Shape
- Oval
- Installation
- Bolt-on, no drilling required
- Finish
- E-coating heavy textured powder finish
These Tyger Auto Rider running boards use an oval carbon steel tube with a 3.5 inch step pad, wider than a single round tube. The E-coating textured powder finish covers the full body. They bolt to the rocker panel with no drilling and carry a 500 lb capacity. Choose them for a Crew Cab Chevy Silverado or GMC Sierra if you want a wide, stable step.
Pros
- Oval tube with a 3.5 inch step pad for a wider stepping surface
- Carbon steel body with end-to-end E-coating and textured powder finish
- Bolt-on installation with no drilling required and hardware included
- 500 lb weight capacity
- About 13 inches of ground clearance
Cons
- Fits 2007-2018 Silverado/Sierra 1500 and 2007-2019 2500, not newer generations
- Textured black finish is one of several color and size options, so you must match your cab
Good fit if
- You drive a 2007-2018 Chevy Silverado or GMC Sierra 1500 Crew Cab
- You want a wider 3.5 inch step pad than a round tube provides
- You prefer a bolt-on install with no drilling
Skip if
- You drive a Silverado or Sierra outside the listed year ranges
- You want a stainless steel finish instead of textured black
Verdict: Tyger Auto 3.5" Rider Oval Running Boards give Crew Cab Silverado and Sierra owners a wide oval step with a 500 lb rating and a no-drill bolt-on mount.
Specifications side by side
| Spec | Tyger Auto 3.5" Rider Running Boards | Tyger Auto Trax 6.3" Side Steps for Silverado Crew Cab | Tyger Auto LanderX Nissan Frontier Crew Cab | Tyger Auto LanderX Triangular Running Boards | Tyger Auto Access Drop Steps for Ram Crew Cab | Tyger Auto Tyger Access Drop Step for Chevy Colorado | Tyger Auto 3.5" Rider Running Boards | Tyger Auto 3.5" Rider Oval Tube | Tyger Auto 6" Riser Running Boards | Tyger Auto 3.5" Rider Running Boards for Nissan Frontier | Tyger Auto Access Drop Step Running Boards | Tyger Auto LanderX Triangular Running Boards | Tyger Auto 3.5" Rider Oval Nerf Bars | Tyger Auto LanderX Colorado/Canyon Crew Cab | Tyger Auto 3.5" Rider Oval Running Boards |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Compatible Vehicle | 2019-2026 Silverado / Sierra 1500 | not specified | 2005-2027 Nissan Frontier | not specified | not specified | 2015-2027 Chevy Colorado/GMC Canyon | 2019-2027 Ram 1500 (not 19-24 Classic) | not specified | not specified | 2005-2027 Nissan Frontier | not specified | not specified | 2015-2026 Chevy Colorado GMC Canyon | 2015-2027 Chevy Colorado / GMC Canyon | not specified |
| Cab Size | Crew Cab | Crew Cab | Crew Cab | Crew Cab | Crew Cab | Crew Cab | Crew Cab | Crew Cab | Crew Cab | Crew Cab | Crew Cab | Crew Cab | Crew Cab | Crew Cab | Crew Cab |
| Material | Carbon steel | carbon steel | Carbon steel | Carbon steel | 2 inch diameter carbon steel | 2 inch diameter carbon steel | polished stainless steel | Stainless steel | Aluminum | stainless steel | 2 inch diameter carbon steel | Carbon steel | not specified | Carbon steel | Carbon steel |
| Step Width | 3.5 inch | 6.3 inches | 6.38 inches | 6.38 inches | 7.24 inches | 7.24 inches | 3.5 inches | 3.5 inches | 6 in | 3.5 inch | 7.24 inches | 6.38 inches | 3.5 inches | 6.38 inches | 3.5 inches |
| Tube Shape | Oval | dual-tubular | Triangular | Triangular | Tubular | Tubular | oval | Oval | Triangle | oval | Tubular | Triangular | Oval | Triangular | Oval |
| Installation | No drilling required | no-drill bolt-on | Bolt-on | Bolt-on, no drilling | No-drill bolt-on | No-drill bolt-on | bolt-on, no drilling required | Drilling required for some models | No drilling required | bolt-on, no drilling required | No-drill bolt-on | not specified | Bolt-on, no drilling required | Bolt-on | Bolt-on, no drilling required |
| Finish | E-coating textured powder finish | textured black powder E-coating | Textured black powder coat | E-coating powder textured black | Textured black | Textured black | polished stainless steel | Polished stainless steel | Satin black powder-coating | polished | Textured black | E-coating powder textured black | Textured Black | Textured black powder coat | E-coating heavy textured powder finish |
| Weight Capacity | 500 lb. | 500 lb | 500 lb | 500 lb | 500 lb | 500 lb | 500 lb | 500 lb | 500 lb | 500 lb. | 500 lb | 500 lb | 500 lb | 500 lb | 500 lb |
| Compatible Truck | Chevy Silverado, GMC Sierra | Chevy Silverado, GMC Sierra | Nissan Frontier | Chevy Silverado, GMC Sierra | Dodge Ram 1500, Ram | Chevy Colorado, GMC Canyon | Dodge Ram 1500, Ram | Dodge Ram 1500, Ram | Chevy Silverado, GMC Sierra | Nissan Frontier | Chevy Silverado, GMC Sierra | Dodge Ram 1500, Ram | Chevy Colorado, GMC Canyon | Chevy Colorado, GMC Canyon | Chevy Silverado, GMC Sierra |
| Size | Silverado / Sierra Crew Cab (4th Gen) | Silverado / Sierra Crew Cab (4th Gen) | Tyger LanderX | Crew Cab | Crew Cab | Crew Cab | Crew Cab | Crew Cab | 6 Inch | Frontier | Crew Cab | Crew Cab | Crew Cab | 15-27 Colorado/Canyon Crew Cab | Crew Cab |
| Width | 3.5-Inch | 6.3 inches | 6.38 inches | 6.38 inches | 7.24 inches | 7.24 inches | 3.5-Inch | 3.5-Inch | 6-Inch | 3.5-Inch | 7.24 inches | 6.38 inches | 3.5-Inch | 6.38 inches | 3.5-Inch |
| Style | Nerf Bars | Side Steps | Nerf Bars | Nerf Bars | Drop Step | Drop Step | Nerf Bars | Nerf Bars | Nerf Bars | Nerf Bars | Drop Step | Nerf Bars | Nerf Bars | Nerf Bars | Nerf Bars |
| Dimensions | 86.8 × 2.95 × 4.61 inches | 84.9 × 6.3 × 2.36 inches | 75.8 × 6.38 × 5.12 inches | 85 × 6.38 × 5.12 inches | 85 × 7.24 × 5.59 inches | 78 × 7.24 × 5.59 inches | 78 × 4.61 × 2.95 inches | 84.1 × 4.61 × 2.95 inches | 84.2 × 6.05 × 2.5 inches | 78.1 × 4.61 × 2.91 inches | 85.7 × 7.24 × 5.59 inches | 85 × 6.38 × 5.12 inches | 80.1 × 4.61 × 2.95 inches | 77 × 6.38 × 5.12 inches | 86.8 × 2.95 × 4.61 inches |
| Weight | 41.9 pounds | 52.2 pounds | 38.5 pounds | 44.1 pounds | 49 pounds | 42.6 pounds | 36.5 pounds | 35.4 pounds | 29.6 pounds | 28.6 pounds | 46.1 pounds | 44.1 pounds | 30.3 pounds | 39.3 pounds | 34.4 pounds |
| Color | Black | Textured Black | Textured Black | Textured Black | Textured Black | Textured Black | Stainless Steel | Stainless Steel | Black | Stainless Steel | Textured Black | Textured Black | Textured Black | Textured Black | Textured Black |
| Model | TG-SS2C35068 | TG-TX7C29758 | TG-LX3N82398 | TG-LX3C82318 | TG-AS2D24008 | TG-AS2C24002 | TG-SS2D35097 | TG-SS2D35317 | TG-RS6C60248 | TG-SS2N35207 | TG-AS2C24001 | TG-LX3D82348 | TG-SS2C35168 | TG-LX3C82388 | TG-SS2C35018 |
For home workout setups, you can evaluate motor sizes and belt specs across the best treadmills for running.
How to Choose the Right Running Boards
-
Check Material for Rust Resistance
You should pick stainless steel if you want corrosion resistance without added weight. The 3.5" Rider boards for Ram 1500 use stainless steel, weighing just 36.5 pounds. Carbon steel options like the Trax side steps weigh 52.2 pounds but rely on a textured black coating for protection. Aluminum models, such as the 6" Riser boards, offer a lightweight alternative at 29.6 pounds. Consider your local climate and maintenance preferences when selecting the material that best fits your needs.
-
Match Step Width to Stability Needs
Step width directly impacts footing stability. Wider steps, like the 7.24-inch Access Drop Steps for Ram 1500, provide a broad surface for secure footing. The 6.38-inch wide LanderX triangular boards suit lifted trucks that need extra reach. Narrower 3.5-inch Rider bars offer a sleek profile but a smaller contact area. Measure your boot size and driving habits to decide if you prioritize maximum stability or a lower visual profile for your crew cab truck.
-
Verify Drop Height for Lifted Trucks
Lifted trucks require running boards with greater drop heights to maintain accessibility. The LanderX Triangular boards feature a 5.12-inch height, creating a significant drop for easier cabin entry. Standard boards like the 3.5" Rider have a height of 2.95 inches, which may be too high for lifted setups. Check the height spec against your truck’s lift kit. A larger drop ensures you can step up comfortably without straining, regardless of your truck’s modified ride height.
-
Compare Weight Capacity for Safety
Weight capacity ensures the boards support your daily use. Most Tyger Auto models listed here support 500 pounds, including the Trax Dual-Tube and Access Drop Steps. This capacity handles heavy boots and gear safely. The 6" Riser aluminum boards also carry this rating. Always verify the published load limit before purchasing. A higher capacity provides peace of mind for families or workers who frequently load gear or step onto the boards with substantial weight.
-
Ensure No-Drill Installation Fit
No-drill installation saves time and preserves your truck’s factory holes. The 3.5" Rider boards for Silverado and Sierra use a no-drill bolt-on method. The Access Drop Steps for Colorado and Canyon also offer this convenience. Some LanderX models for Ram trucks may require minor drilling on older models. Check the installation method in the specs. A no-drill fit is ideal if you want a secure mount without modifying your vehicle’s body panels.
Frequently asked questions
Do Tyger Auto running boards require drilling for installation?
Most models use a no-drill bolt-on installation method. The 3.5" Rider boards for Silverado and Sierra feature this design. The Access Drop Steps for Ram and Colorado also use no-drill mounting. This approach protects your truck’s body and simplifies the setup process for most crew cab owners.
What is the weight capacity of Tyger Auto side steps?
Many models support a 500 lb load capacity. This rating applies to the 3.5" Rider boards and the Trax Dual-Tube Side Steps. The LanderX Triangular Running Boards also feature this 500 lb limit. You should check the specific model details to confirm the exact rating for your truck.
Which Tyger Auto running boards are best for lifted trucks?
The LanderX Triangular Running Boards are designed for lifted trucks. They offer a 5-inch drop and a 6.38-inch wide step. This design aids cabin access for lifted Nissan Frontier and Silverado models. The triangular carbon steel construction provides stability for off-road and lifted applications.
Are stainless steel running boards available for crew cabs?
Yes, the 3.5" Rider Running Boards come in stainless steel. They are available for Ram 1500, Colorado, and Frontier crew cabs. The stainless steel construction offers corrosion resistance. These boards weigh less than carbon steel options, with some models weighing around 36.5 pounds.
What is the widest step width available in this lineup?
The Access Drop Steps provide the widest step at 7.24 inches. This width is available for Ram 1500, Colorado, and Silverado crew cabs. The LanderX and Trax models offer 6.38-inch and 6.05-inch steps respectively. Choose the wider steps for maximum footing stability.
Do these running boards fit GMC Sierra crew cabs?
Yes, several models are compatible with GMC Sierra crew cabs. The 3.5" Rider, Trax, LanderX, and Access Drop Steps all list Sierra compatibility. They fit the 4th generation Silverado and Sierra models. You should verify the specific model number matches your truck year and cab configuration.