OEDRO 6" Running Boards Two-Stair Alternatives: 6 Similar Picks Compared
As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.
If you are looking for oedro 6 running boards two stair alternatives, you likely need side steps that match the original’s specific design. The OEDRO model features a two-stair layout, a 550 lbs weight capacity, and a 6-inch width. These specs make it practical for lifted Jeep Wrangler JL owners who need sturdy access without drilling.
You might want a different option if your vehicle is a truck, or if you prefer a different material like aluminum or carbon steel. The 6 picks on this list were chosen because their specifications overlap with the original. Each alternative shares similar width or mounting requirements but targets different vehicle models. This guide compares these specs so you can find the right fit for your cab size and load needs.
Our top pick: OEDRO 6" Two-Stair Jeep Wrangler JL.
How alternatives compare to OEDRO
COMNOVA 6" Running Boards for Dodge Ram 1500
The COMNOVA 6" Running Boards target Dodge Ram 1500 Crew Cab models, unlike the OEDRO unit for Jeep Wrangler. This step is 82 inches long and weighs 48.9 pounds, making it significantly lighter than the 75-pound OEDRO. It offers a 6-inch width but a lower profile at 2 inches high. The design suits 2009-2018 Ram owners who need sturdy access. You should note that early models may require minor drilling, whereas the OEDRO requires no cutting. This option prioritizes weight savings and specific fitment for Ram trucks over the heavy-duty two-stair design found on the Jeep-specific OEDRO step.
Tyger Auto Trax 6.3" Dual-Tube Side Steps
The Tyger Auto Trax 6.3" Dual-Tube Side Steps are built for Jeep Wrangler JK 4-Door models, differing from the JL-compatible OEDRO. This unit is 6.3 inches wide, slightly broader than the OEDRO’s 6-inch step. It weighs only 47.2 pounds, offering substantial weight savings compared to the 75-pound OEDRO. The height is 2.36 inches, providing a lower profile. This design focuses on structural strength and heavy-duty support for older JK models. You get a textured black finish and a dual-tube construction. This alternative is ideal if you own a JK Wrangler and prefer a lighter, narrower step over the heavier, two-stair layout of the OEDRO.
PZ 6" Running Boards for Ford F-150 SuperCrew
The PZ 6" Running Boards fit Ford F-150 SuperCrew Cab trucks, a different vehicle platform than the Jeep Wrangler. This aluminum step weighs 38 pounds, much lighter than the 75-pound OEDRO. It measures 85.4 inches long and 8.66 inches wide, offering a broader surface area. The height is 7.87 inches, which is higher than the OEDRO’s 6-inch height. This model provides a 500 lbs capacity, slightly less than the OEDRO’s 550 lbs. It is corrosion-resistant due to the aluminum material. You should choose this if you own a Ford F-150 and want a lighter, wider step with high corrosion resistance, rather than the specific two-stair design for Jeep.
COMNOVA 6" Running Boards for Silverado/Sierra Crew Cab
The COMNOVA 6" Carbon Steel Slider fits 2019-2026 Chevy Silverado and GMC Sierra Crew Cabs, unlike the Jeep-specific OEDRO. This step is 86 inches long and weighs 49.6 pounds, significantly lighter than the 75-pound OEDRO. It maintains a 6-inch width but has a lower 2-inch height. The carbon steel construction offers robust support and adjustability. You get a black finish similar to the OEDRO. This option is best for Crew Cab owners who value adjustability and heavy-duty materials. It gives up the two-stair layout and higher 550 lbs capacity of the OEDRO in favor of a lighter, simpler side step for GM trucks.
DNA Motoring 6" Aluminum Running Boards
The DNA Motoring 6" Aluminum Running Boards are designed for standard cab Silverado and Sierra trucks, differing from the 4-door Jeep fitment. This unit weighs only 25.8 pounds, far lighter than the 75-pound OEDRO. It is 56 inches long, much shorter than the OEDRO’s 71 inches. The width is 9 inches, providing a wider step surface. The height is 8 inches, higher than the OEDRO’s 6-inch step. The aluminum construction offers corrosion resistance. You get a sturdy, high-capacity step that installs without drilling. This alternative is ideal for standard cab owners needing a lightweight, wide, and durable nerf bar, rather than the specific two-stair design for Jeep Wrangler JL.
COMNOVA 6" Running Boards for Silverado/Sierra Crew Cab
The COMNOVA 6" Steel Side Step fits 2007-2018 Chevy Silverado and GMC Sierra Crew Cabs, unlike the Jeep-compatible OEDRO. This step weighs 49.6 pounds, lighter than the 75-pound OEDRO. It is 86 inches long and 6 inches wide, matching the OEDRO’s width but offering a lower 2-inch height. The steel construction prioritizes structural strength over weight savings. You get a black finish and a simple side step design. This option is best for older Crew Cab owners who need a sturdy mounting solution. It gives up the two-stair layout and higher weight capacity of the OEDRO in favor of a lighter, simpler step for GM trucks.
Quick picks
Our 7 picks
OEDRO 6" Two-Stair Jeep Wrangler JL
Best for: lifted Jeep Wrangler JL owners
- Compatible Vehicle
- 2018-2026 Jeep Wrangler JL 4 Door
- Material
- Steel
- Step Width
- 6 inch
- Installation
- Bolt-on, no cutting or drilling
- Finish
- Powder coating
- Weight Capacity
- 550 lbs
View on Amazon: OEDRO 6" Two-Stair Jeep Wrangler JL Affiliate link
These OEDRO running boards feature a two-stair layout designed for 2018-2026 Jeep Wrangler JL 4 Door models. The 6-inch step width provides a stable footing surface. The structure supports up to 550 lbs without bending. The powder coating resists rust and corrosion. This design aids entry for vehicles with lift kits or oversized tires.
Pros
- Two-stair layout improves access for lifted trucks
- 550 lbs weight capacity ensures durability
- Powder coating resists rust and corrosion
- No cutting or drilling required for installation
Cons
- Limited to Jeep Wrangler JL 4 Door models
- Heavier build at 75 pounds
- Requires professional installation for safety
Good fit if
- You own a 2018-2026 Jeep Wrangler JL 4 Door
- You have a lifted truck with large tires
- You need a high weight capacity step
Skip if
- You drive a different vehicle make or model
- You prefer a single-step design
- You want a lighter installation option
Verdict: OEDRO 6" Two-Stair Running Boards fit Jeep Wrangler owners who need sturdy access for lifted setups. The 550 lbs capacity and two-stair design make it practical for off-road use.
COMNOVA 6" Running Boards for Dodge Ram 1500
Best for: 2009-2018 Dodge Ram 1500 Crew Cab
- Compatible Vehicle
- 2009-2026 Dodge Ram 1500 2500 3500
- Cab Size
- Crew Cab
- Material
- Carbon steel
- Step Width
- 6 in
- Installation
- Direct bolt-on, minor drilling
- Finish
- Powder coated
View on Amazon: COMNOVA 6" Running Boards for Dodge Ram 1500 Affiliate link
This COMNOVA running board fits 2009-2018 Dodge Ram 1500 Crew Cabs. It features a 6-inch wide step made from heavy-duty carbon steel. The unit supports up to 500 pounds and includes a powder-coated finish for rust prevention. Installation is mostly direct bolt-on, though minor drilling may be needed for some early models. The slider design allows for forward or backward adjustment to fit your specific needs.
Pros
- 500 lb weight capacity
- 6-inch wide step for secure footing
- Adjustable slider design for customization
- Heavy-duty carbon steel construction
Cons
- Requires minor drilling for 2009-2011 models
- Excludes Quad Cab and Mega Cab variants
- Not compatible with 2019+ new body style
Good fit if
- You own a 2009-2018 Dodge Ram 1500 Crew Cab
- You need a high weight capacity for heavy gear
- You want adjustable positioning for a custom fit
Skip if
- You drive a Quad Cab or Mega Cab
- You have a 2019 or newer new body style Ram
- You prefer a strictly no-drill installation
Verdict: COMNOVA 6" Side Steps for Dodge Ram provides a sturdy, high-capacity step for 2009-2018 Crew Cab owners who need adjustable fitment and do not mind minor drilling for early models.
Tyger Auto Trax 6.3" Dual-Tube Side Steps
Best for: Jeep Wrangler JK 4-Door owners needing heavy-duty support
- Compatible Vehicle
- 2007-2018 Jeep Wrangler JK 4-Door
- Cab Size
- 4-Door
- Material
- carbon steel
- Step Width
- 6.3 inches
- Tube Shape
- dual-tubular
- Installation
- no-drill bolt-on
View on Amazon: Tyger Auto Trax 6.3" Dual-Tube Side Steps Affiliate link
This Tyger Auto Trax side step is built for 2007-2018 Jeep Wrangler JK 4-Door models. It features a dual-tubular carbon steel construction with a textured black powder E-coating finish. The step width is 6.3 inches, offering a solid platform. It supports a 500 lb weight capacity and installs as a no-drill bolt-on. Ground clearance remains approximately 18 inches. It is a robust option for JK owners seeking durable side steps.
Pros
- Dual-tubular carbon steel construction for robust support
- 500 lb weight capacity for steady footing
- Textured black powder E-coating for rust resistance
- No-drill bolt-on installation in about 20 minutes
- 6.3 inch step width provides ample surface area
Cons
- Not compatible with Jeep Wrangler JL models
- Heavier build at 47.2 pounds
- Limited to 4-Door cab size only
Good fit if
- You own a 2007-2018 Jeep Wrangler JK 4-Door
- You need a 500 lb weight capacity for passengers
- You prefer a no-drill bolt-on installation
Skip if
- You drive a Jeep Wrangler JL model
- You require a 2-Door cab configuration
- You want a lighter step under 40 pounds
Verdict: Tyger Auto Trax 6.3" Dual-Tube Side Steps is a heavy-duty option for 2007-2018 Jeep Wrangler JK 4-Door owners who prioritize structural strength and a high weight capacity over lightweight design.
PZ 6" Running Boards for Ford F-150 SuperCrew
Best for: Ford F-150 SuperCrew Cab owners
- Compatible Vehicle
- 2015-2026 F150, 2017-2026 F250 F350
- Cab Size
- SuperCrew Cab, Crew Cab
- Material
- Aluminum alloy
- Step Width
- 6"
- Installation
- No-drill bolt-on
- Weight Capacity
- 500 lbs per side
View on Amazon: PZ 6" Running Boards for Ford F-150 SuperCrew Affiliate link
This PZ running board is designed for 2015-2026 Ford F-150 SuperCrew and F-250/F-350 Crew Cab trucks. It features a 6-inch step width and an anti-corrosion black aluminum alloy construction. The unit supports up to 500 lbs per side. It includes brackets and detailed installation guides. You should choose this if you need a durable step for a 4-door Ford truck.
Pros
- 6-inch step width for easy access
- 500 lbs weight capacity per side
- Anti-corrosion black aluminum alloy build
- Compatible with SuperCrew and Crew Cab models
Cons
- Only fits 4-door SuperCrew/Crew Cab trucks
- No mention of LED lighting or step lights
- Requires manual installation with included hardware
Good fit if
- You own a 2015-2026 Ford F-150 SuperCrew Cab
- You need a high weight capacity step
- You prefer aluminum alloy construction
Skip if
- You drive a Super Cab or Extended Cab
- You need integrated LED step lights
- You require pre-assembled installation
Verdict: PZ 6" Aluminum Running Boards for Ford F-150 fits 4-door Ford trucks needing a sturdy 500 lb capacity step. It suits owners of SuperCrew cabs who want corrosion-resistant aluminum.
COMNOVA 6" Running Boards for Silverado/Sierra Crew Cab
Best for: Crew Cab trucks needing adjustable mounting
- Compatible Vehicle
- 2019-2026 Chevy Silverado/Sierra 1500
- Cab Size
- Crew Cab
- Material
- Carbon steel
- Step Width
- 6 in
- Installation
- No-drill
- Finish
- Black powder coated
View on Amazon: COMNOVA 6" Running Boards for Silverado/Sierra Crew Cab Affiliate link
This COMNOVA running board is built from heavy-duty carbon steel with a black powder-coated finish. It features a 6-inch wide step for secure footing and includes slip-resistant plastic pads. The design allows for adjustable bottom slider positions to fit forward or backward on your vehicle. It mounts without drilling, making installation straightforward for your 2019-2026 Chevy Silverado or GMC Sierra 1500 Crew Cab.
Pros
- Heavy-duty carbon steel construction
- 6-inch wide step for stability
- Adjustable bottom slider position
- No drilling required for installation
Cons
- Heavier build at 49.6 pounds
- Limited to Crew Cab configurations
- Plastic step pads may wear over time
Good fit if
- You need a sturdy step for your Crew Cab
- You prefer adjustable mounting for perfect alignment
- You want a durable carbon steel build
Skip if
- You drive a Double Cab or Extended Cab
- You need stainless steel aesthetics
- You want a lighter aluminum option
Verdict: COMNOVA 6" Carbon Steel Slider offers robust support for Crew Cab owners who value adjustability and heavy-duty materials. It is a solid choice for those prioritizing structural integrity over weight savings.
DNA Motoring 6" Aluminum Running Boards
Best for: standard cab Silverado and Sierra trucks
- Cab Size
- Standard Cab
- Material
- Extruded Aluminum
- Step Width
- 6 inches
- Installation
- No-drill installation
- Finish
- Powder Coated
- Weight Capacity
- 350 lb
View on Amazon: DNA Motoring 6" Aluminum Running Boards Affiliate link
These DNA Motoring running boards are built from extruded aluminum with a powder-coated black finish. They feature a 6-inch step width and support up to 350 pounds. The ABS plastic pads provide slip resistance. They bolt to factory points without drilling. This set fits standard cab Silverado and Sierra models. You get a durable step that resists rust and corrosion.
Pros
- Extruded aluminum construction resists corrosion
- 350 lb weight capacity for heavy use
- ABS slip-resistant step pads add traction
- No-drill installation bolts to factory points
Cons
- Limited to standard cab trucks only
- Installation instructions are not included
- Step width is narrower than some alternatives
Good fit if
- You drive a standard cab Silverado or Sierra
- You need a high weight capacity step
- You want a no-drill aluminum upgrade
Skip if
- You have a crew or extended cab truck
- You prefer a wider step surface
- You need included installation guides
Verdict: DNA Motoring 6" Aluminum Running Boards offer a sturdy, corrosion-resistant step for standard cab trucks. You should buy these if you need a durable, high-capacity side step that installs without drilling.
COMNOVA 6" Running Boards for Silverado/Sierra Crew Cab
Best for: heavy-duty crew cab trucks
- Compatible Vehicle
- 2007-2018 Silverado/Sierra 1500
- Cab Size
- Crew Cab
- Material
- Carbon steel
- Step Width
- 6-inch
- Installation
- Direct bolt-on, no need to drill
- Finish
- Powder coated
View on Amazon: COMNOVA 6" Running Boards for Silverado/Sierra Crew Cab Affiliate link
This COMNOVA side step is built from galvanized steel with a powder-coated finish. It offers a 6-inch wide step for secure footing. The unit supports 500 lbs and mounts directly without drilling. It fits crew cabs for 2007-2018 Silverado and Sierra models. You get adjustable positioning for a custom fit. This design prioritizes durability and ease of installation for your truck.
Pros
- Galvanized steel construction with powder coating
- 6-inch wide step for stability
- 500 lb weight capacity
- Direct bolt-on installation
Cons
- Fits only crew cab configurations
- Excludes diesel engine models
- Not compatible with 2020-2025 models
Good fit if
- You drive a crew cab Silverado or Sierra
- You prefer heavy-duty steel construction
- You want a 500 lb load rating
Skip if
- You own a double cab truck
- You have a 2020 or newer model
- You use a diesel engine
Verdict: COMNOVA 6" Steel Side Step provides a sturdy, high-capacity mounting solution for older crew cab trucks. It suits buyers who prioritize structural strength and simple installation over lightweight materials.
Specifications side by side
| Spec | OEDRO 6" Two-Stair Jeep Wrangler JL | COMNOVA 6" Running Boards for Dodge Ram 1500 | Tyger Auto Trax 6.3" Dual-Tube Side Steps | PZ 6" Running Boards for Ford F-150 SuperCrew | COMNOVA 6" Running Boards for Silverado/Sierra Crew Cab | DNA Motoring 6" Aluminum Running Boards | COMNOVA 6" Running Boards for Silverado/Sierra Crew Cab |
|---|---|---|---|---|---|---|---|
| Compatible Vehicle | 2018-2026 Jeep Wrangler JL 4 Door | 2009-2026 Dodge Ram 1500 2500 3500 | 2007-2018 Jeep Wrangler JK 4-Door | 2015-2026 F150, 2017-2026 F250 F350 | 2019-2026 Chevy Silverado/Sierra 1500 | not stated | 2007-2018 Silverado/Sierra 1500 |
| Cab Size | not stated | Crew Cab | 4-Door | SuperCrew Cab, Crew Cab | Crew Cab | Standard Cab | Crew Cab |
| Material | Steel | Carbon steel | carbon steel | Aluminum alloy | Carbon steel | Extruded Aluminum | Carbon steel |
| Step Width | 6 inch | 6 in | 6.3 inches | 6" | 6 in | 6 inches | 6-inch |
| Tube Shape | not stated | not stated | dual-tubular | not stated | not stated | not stated | not stated |
| Installation | Bolt-on, no cutting or drilling | Direct bolt-on, minor drilling | no-drill bolt-on | No-drill bolt-on | No-drill | No-drill installation | Direct bolt-on, no need to drill |
| Finish | Powder coating | Powder coated | textured black powder E-coating | not stated | Black powder coated | Powder Coated | Powder coated |
| Weight Capacity | 550 lbs | 500 lb | 500 lb | 500 lbs per side | not stated | 350 lb | 500 lbs |
| Compatible Truck | Jeep Wrangler | Dodge Ram 1500, Ram | Jeep Wrangler | Ford F-150, Ford F-250/350 Super Duty | Chevy Silverado, GMC Sierra | Chevy Silverado, GMC Sierra | Chevy Silverado, GMC Sierra |
| Width | 6-Inch | 6-Inch | 6.3 inches | 6-Inch | 6-Inch | 6-Inch | 6 inches |
| Style | Side Steps | Side Steps | Side Steps | Side Steps | Side Steps | Nerf Bars | Side Steps |
| Dimensions | 71 × 6 × 6 inches | 82 × 6 × 2 inches | 70.5 × 6.3 × 2.36 inches | 85.4 × 8.66 × 7.87 inches | 89 × 6 × 2 inches | 56 × 9 × 8 inches | 89 × 6 × 2 inches |
| Weight | 75 pounds | 48.9 pounds | 47.2 pounds | 38 pounds | 52 pounds | 25.8 pounds | 49.6 pounds |
| Size | 6 inch | 09-18 Ram Crew Cab | Wrangler JKU 4Door | Super Crew Cab/Crew Cab | 19-26 Silverado Crew Cab | 6-Inch-Black-Aluminum | 07-18 Silverado Crew Cab |
| Color | Black | Black | Textured Black | Aluminum Ribbed Tread | Black | Black | Black |
| Model | 7RTFKX3 | 20375H6-BLK | TG-TX7J27608 | crew cab | 15835S6-BLK | STEPB-ZTL-8019-ALBK | 15655H6-BLK-8-C |
Looking beyond this list? See hysum 11 6 inflatable paddle board alternatives.
Frequently asked questions
Which running board is best for lifted Jeep Wrangler JL owners?
The OEDRO 6" Two-Stair Jeep Wrangler JL is the top choice for lifted setups. It features a two-stair design that improves ground clearance while providing a sturdy step. The unit supports up to 550 lbs and measures 71 inches long. Its 6-inch width and black finish match the rugged aesthetic of off-road vehicles.
What is the lightest running board option on this list?
The DNA Motoring 6" Aluminum Running Boards are the lightest option at 25.8 pounds. Designed for standard cab Silverado and Sierra trucks, they use corrosion-resistant aluminum construction. These nerf bars measure 56 inches long and offer a high weight capacity without adding excessive bulk to the vehicle's side profile.
Which side steps fit Dodge Ram 1500 Crew Cab models?
The COMNOVA 6" Running Boards for Dodge Ram 1500 are specifically engineered for 2009-2018 Crew Cab models. This step is 82 inches long and weighs 48.9 pounds. It provides adjustable fitment for early models, though minor drilling may be required. The black finish complements the truck's exterior.
Are there heavy-duty options for Jeep Wrangler JK 4-Door owners?
Yes, the Tyger Auto Trax 6.3" Dual-Tube Side Steps are built for structural strength. They fit Jeep Wrangler JK 4-Door models from 2007 to 2018. Weighing 47.2 pounds, these steps prioritize durability over lightweight design. The textured black finish and 6.3-inch width provide robust support for off-road use.
Which running boards are suitable for Ford F-150 SuperCrew Cab trucks?
The PZ 6" Running Boards for Ford F-150 SuperCrew are ideal for four-door Ford trucks. Made from aluminum, they resist corrosion and support up to 500 lbs. Measuring 85.4 inches long, these steps offer a sturdy platform. The black aluminum construction ensures longevity and a clean appearance.
Do any options offer adjustable mounting for Silverado and Sierra Crew Cabs?
The COMNOVA 6" Carbon Steel Slider offers robust support with adjustable mounting features. It fits 2019-2026 Silverado and Sierra Crew Cab models. Weighing 49.6 pounds, it prioritizes structural integrity. The 86-inch length and black finish provide a solid, durable step for heavy-duty crew cab trucks.
Which running boards install without drilling on standard cab trucks?
The DNA Motoring 6" Aluminum Running Boards install without drilling on standard cab Silverado and Sierra trucks. These nerf bars measure 56 inches long and weigh 25.8 pounds. The aluminum construction offers corrosion resistance and a high weight capacity. They provide a sturdy, durable step for standard cab configurations.