Looking Beyond the PZ 6" Running Boards Ford? 6 Alternatives Worth a Look
As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.
If you are researching pz 6 running boards compatible alternatives, you might want to look at other options that share similar specifications. The PZ 6" model offers a sturdy 500 lb weight capacity and a wide 6-inch step for Ford F-150 SuperCrew owners. Its aluminum construction resists corrosion, and the black finish provides a clean look. This setup is ideal if you prioritize durability and high load limits for daily use.
However, you may need a different step width, material, or fitment for your specific truck. Some drivers prefer lighter materials or lower profiles to preserve ground clearance. Others might require side steps for older crew cab models or dual-tube designs for extra robustness. The 6 alternatives listed here were chosen because their specs overlap with the original PZ product. Each option targets a specific need, whether it is budget constraints, aesthetic preferences, or unique cab sizes. Review the data below to find the right match for your vehicle.
Our top pick: PZ 6" Running Boards for Ford F-150 SuperCrew.
Comparing Alternatives to PZ 6
Tyger Auto Trax Dual-Tube Side Steps
The Tyger Auto Trax Dual-Tube Side Steps match the PZ 6" 500 lb weight capacity but offer a slightly wider 6.3-inch step surface. It uses a dual-tube construction that adds durability but increases the weight to 52.2 pounds, compared to the PZ 6" 38-pound aluminum build. This extra mass provides robust support for SuperCrew owners who prioritize heavy-duty performance over lighter materials. The textured black finish offers similar corrosion resistance. If you need maximum load bearing for Super Duty models and do not mind the additional weight, this dual-tube design is a practical upgrade. It suits those who want a wider step platform without sacrificing structural integrity.
Tyger Auto 3.5" Rider Running Boards Ford F-150 SuperCrew
The Tyger Auto 3.5" Oval Rider Running Boards differ significantly by prioritizing ground clearance over step width. At 2.95 inches wide, it is much narrower than the PZ 6" 6-inch step, which may challenge users needing a broad foothold. However, its lower profile helps maintain better approach angles and reduces snag risk. It shares the same 500 lb weight capacity and aluminum alloy construction, ensuring similar durability for SuperCrew cabs. The 40.8-pound weight is comparable to the PZ 6". Choose this option if you value rust resistance and low-profile aesthetics for daily driving. It is ideal for SuperCrew owners who prefer a sleeker look and do not require a wide platform for entry.
Comnova 6" Carbon Steel Side Steps
The Comnova 6" Carbon Steel Side Steps target older 2004-2014 Ford F-150 Crew Cabs, unlike the PZ 6" which fits newer 2015-2026 models. It matches the 6-inch step width but uses carbon steel instead of aluminum, resulting in a heavier 50.5-pound unit. This steel construction offers high adjustability and ruggedness, appealing to owners of older trucks who value heavy-duty support. The 2-inch height is lower than the PZ 6" 7.87-inch step, which may affect ease of entry for some users. Select this alternative if you have an older Crew Cab and prefer the solid feel of steel over lighter aluminum. It provides a sturdy platform for trucks that need robust side steps.
Tyger Auto Access Running Boards
The Tyger Auto Access 7.2" Drop Step offers a significantly wider 7.24-inch step surface compared to the PZ 6" 6-inch width. This wider platform provides more foot space for SuperCrew owners, enhancing comfort during daily entry and exit. It shares similar durability traits with a textured black finish and supports Super Duty models. The 44.1-pound weight is slightly higher than the PZ 6" but remains manageable. The 5.59-inch height is lower, which may aid accessibility for some users. Choose this drop step if you prioritize maximum step width and practical ease of use. It is a robust alternative for SuperCrew owners who want a wider foothold without compromising on structural support or finish quality.
DNA Motoring 6" Aluminum Running Boards
The DNA Motoring 6" Aluminum Running Boards are designed for standard cab trucks, not the SuperCrew cabs supported by the PZ 6". It features a 6-inch step width and aluminum construction, similar to the PZ 6". However, its 56-inch length is much shorter, fitting 2-door models rather than 4-door SuperCrews. The 25.8-pound weight is lighter, reflecting its smaller size. This product suits Chevy Silverado or GMC Sierra owners with standard cabs. It does not compete directly with the PZ 6" for Ford SuperCrew applications. If you drive a standard cab truck and need a wide, lightweight aluminum step, this is a suitable option. It shares the durable material but differs in vehicle compatibility and dimensions.
AutoBull 6" Aluminum Running Boards
The AutoBull 6" Aluminum Running Boards target Toyota Tacoma Double or Crew Cabs, making them incompatible with Ford F-150 SuperCrew models. It matches the 6-inch step width and aluminum material, offering similar durability. The 34.2-pound weight is lighter than the PZ 6", and the 2.1-inch height is much lower, providing a sleeker profile. This low profile may reduce ground clearance benefits. The anti-slip black finish ensures good traction. Choose this alternative if you own a Tacoma and want a wide, lightweight step. It does not fit Ford vehicles. For Ford SuperCrew owners, the PZ 6" remains the appropriate choice. This product is a valid option only for Tacoma users seeking a similar step width and material quality.
Quick picks
Our 7 picks
PZ 6" Running Boards for Ford F-150 SuperCrew
Best for: Ford F-150 SuperCrew Cab durability
- Compatible Vehicle
- 2015-2026 F150, 2017-2026 F250 F350
- Cab Size
- SuperCrew Cab, Crew Cab
- Material
- Aluminum alloy
- Step Width
- 6"
- Installation
- No-drill bolt-on
- Weight Capacity
- 500 lbs per side
View on Amazon: PZ 6" Running Boards for Ford F-150 SuperCrew Affiliate link
The PZ 6" running boards are made from anti-corrosion black aluminum alloy. They feature a 6-inch step width and support up to 500 lbs per side. These steps fit the SuperCrew Cab (4-door) model of the 2015-2026 Ford F-150. They include brackets and hardware for installation. This set is designed for owners who need durable, high-capacity side steps for their crew cab truck.
Pros
- 6-inch wide step surface for secure footing
- 500 lbs weight capacity per side
- Anti-corrosion black aluminum alloy construction
- Includes brackets and installation hardware
Cons
- Only fits SuperCrew/Crew Cab models
- 38 lbs total weight per side
- No mention of LED lighting or sensors
Good fit if
- You drive a 2015-2026 Ford F-150 SuperCrew Cab
- You need a 500 lbs weight capacity per side
- You prefer a 6-inch wide step surface
Skip if
- You have a Super Cab or Extended Cab truck
- You need steps for a Ford F-250 or F-350
- You require LED lighting or automatic deployment
Verdict: PZ 6" Aluminum Running Boards are a sturdy option for Ford F-150 SuperCrew owners who prioritize high weight capacity and durable aluminum construction over added electronic features.
Tyger Auto Trax Dual-Tube Side Steps
Best for: SuperCrew cabs needing high load capacity
- Cab Size
- Supercrew Cab
- Material
- carbon steel
- Step Width
- 6.3 inches
- Tube Shape
- dual-tubular
- Installation
- no-drill bolt-on
- Finish
- textured black powder E-coating
View on Amazon: Tyger Auto Trax Dual-Tube Side Steps Affiliate link
This Tyger Auto Trax side step features a dual-tubular carbon steel design with a textured black powder E-coating. It offers a 6.3-inch step width and supports up to 500 lb. The unit provides approximately 13 inches of ground clearance and installs via no-drill bolt-on hardware. It fits SuperCrew cabs for 2015-2027 Ford F-150, Lightning, and Super Duty models.
Pros
- 500 lb weight capacity
- 6.3-inch step width
- Dual-tubular carbon steel construction
- No-drill bolt-on installation
Cons
- Heavier at 52.2 pounds
- Limited to SuperCrew cabs
- Shorter warranty than competitors
Good fit if
- You need high load capacity
- You want a wider step surface
- You prefer dual-tube durability
Skip if
- You drive a SuperCab truck
- You want a lighter step
- You need longer warranty coverage
Verdict: Tyger Auto Trax Dual-Tube Side Steps is a heavy-duty option for SuperCrew owners who prioritize a 500 lb capacity and a wide 6.3-inch step. It suits those who want robust dual-tube construction and do not mind the extra weight.
Tyger Auto 3.5" Rider Running Boards Ford F-150 SuperCrew
Best for: SuperCrew cabs needing low-profile steps
- Compatible Vehicle
- 2015-2027 Ford F-150, F-250 F-350 SD
- Cab Size
- SuperCrew Cab
- Material
- carbon steel
- Step Width
- 3.5 in
- Tube Shape
- oval
- Installation
- no-drill
View on Amazon: Tyger Auto 3.5" Rider Running Boards Ford F-150 SuperCrew Affiliate link
This Tyger Auto running board features a 3.5-inch oval tube step pad designed for SuperCrew cabs. The carbon steel construction includes a heavy textured powder finish for rust resistance. It supports up to 500 pounds and mounts without drilling. You get approximately 13 inches of ground clearance. This option suits drivers who prefer a narrower step surface than standard 6-inch models.
Pros
- 3.5-inch oval tube step pad provides a wider surface than round tubes
- Seamless carbon steel tube with E-coating for rust protection
- 500 lb weight capacity
- No drilling required for installation
- Approximately 13 inches of ground clearance
Cons
- 3.5-inch step width is narrower than the 6-inch alternatives on this list
- Only compatible with SuperCrew cabs, not SuperCab
- Textured black finish only available in this specific variation
Good fit if
- You drive a SuperCrew cab Ford F-150 or Super Duty
- You prefer a lower profile step that maintains ground clearance
- You want a seamless tube design for better corrosion resistance
Skip if
- You have a SuperCab or Regular Cab truck
- You require a 6-inch wide step pad for easier access
- You need stainless steel finish options
Verdict: Tyger Auto 3.5" Oval Rider offers a durable, low-profile step for SuperCrew owners who prioritize ground clearance and rust resistance over maximum step width.
Comnova 6" Carbon Steel Side Steps
Best for: older 2004-2014 Ford F-150 Crew Cab trucks
- Compatible Vehicle
- 2004-2014 Ford F150
- Cab Size
- Crew Cab
- Material
- carbon steel
- Step Width
- 6 in
- Installation
- no drilling required
- Finish
- powder coated
View on Amazon: Comnova 6" Carbon Steel Side Steps Affiliate link
These running boards fit 2004-2014 Ford F-150 Crew Cab trucks. They feature a 6-inch wide step made from heavy-duty carbon steel with a black powder coat. The design includes slip-resistant plastic pads and adjustable bottom sliders for precise positioning. Installation requires no drilling. This option suits owners of older F-150 models who need durable side steps with a wide, stable footing.
Pros
- 6-inch wide step for secure footing
- Heavy-duty carbon steel construction
- Adjustable bottom slider position
- No drilling required for installation
Cons
- Limited to 2004-2014 model years
- Does not fit Super Cab configurations
- Heavier at 50.5 pounds total
Good fit if
- You own a 2004-2014 Ford F-150 Crew Cab
- You prefer a wider 6-inch step surface
- You want adjustable mounting positions
Skip if
- You drive a Super Cab with two rear doors
- You own a 2015 or newer F-150
- You need stainless steel finish options
Verdict: Comnova 6" Carbon Steel Side Steps provide a sturdy, wide platform for older Crew Cab owners. It fits those who value adjustability and heavy-duty steel over lighter materials.
DNA Motoring 6" Aluminum Running Boards
Best for: standard cab Silverado and Sierra models
- Cab Size
- Standard Cab
- Material
- Extruded Aluminum
- Step Width
- 6 inches
- Installation
- No-drill installation
- Finish
- Powder Coated
- Weight Capacity
- 350 lb
View on Amazon: DNA Motoring 6" Aluminum Running Boards Affiliate link
This DNA Motoring running board is built from extruded aluminum with a powder-coated finish. It features a 6-inch wide step with a 350 lb weight capacity. The design includes ABS plastic slip-resistant pads and end caps. It is compatible with 2-door standard cab Silverado and Sierra models from 2007 to 2019. You get vehicle-specific mounting brackets for a no-drill installation.
Pros
- Extruded aluminum construction with powder-coated finish
- 350 lb weight capacity on 6-inch wide steps
- ABS plastic slip-resistant step pads and end caps
- No-drill installation using factory mounting points
Cons
- Only fits 2-door standard cab configurations
- Installation instructions are not included
- Does not fit crew or extended cab models
Good fit if
- You drive a 2-door standard cab Silverado or Sierra
- You need a step with a 350 lb weight capacity
- You prefer aluminum construction over steel
Skip if
- You own a crew cab or extended cab truck
- You require installation instructions to be included
- You need a step for 4-door models
Verdict: DNA Motoring 6 Inch Aluminum Running Board is a sturdy option for 2-door standard cab trucks. It provides a high weight capacity and slip-resistant surface for easier entry and exit.
Tyger Auto Access Running Boards
Best for: SuperCrew cabs needing durable daily access
- Compatible Vehicle
- 2015-2027 F-150, 2017-2027 F-250/F-350
- Cab Size
- SuperCrew Cab
- Material
- Carbon steel
- Tube Shape
- Tubular
- Installation
- Easy bolt-on
- Finish
- Textured black
View on Amazon: Tyger Auto Access Running Boards Affiliate link
This Tyger Auto Access running board is a tubular drop step designed for SuperCrew cabs. It features a 2-inch carbon steel frame with a textured black finish. The step width is 7.24 inches, providing a solid foothold. It supports up to 500 pounds and installs via no-drill bolt-on brackets. This model suits drivers seeking a durable, value-oriented side step for daily use.
Pros
- 7.24-inch step width for stable footing
- 500 lb weight capacity
- 2-inch diameter carbon steel construction
- No-drill bolt-on installation
- Textured black corrosion-resistant finish
Cons
- Limited to SuperCrew cab sizes only
- Does not fit SuperCab configurations
- Standard drop step design lacks premium styling
Good fit if
- You drive a SuperCrew cab Ford F-150 or Super Duty
- You need a high weight capacity for frequent use
- You prefer a straightforward bolt-on installation
Skip if
- You have a SuperCab cab with non-full-size doors
- You want a wider step surface for easier access
- You require compatibility with non-SuperCrew models
Verdict: Tyger Auto Access 7.2" Drop Step offers robust support for SuperCrew owners who prioritize durability and ease of installation over aesthetic flair. It is a practical solution for daily entry and exit.
AutoBull 6" Aluminum Running Boards
Best for: 2005-2023 Tacoma Double Cab owners
- Compatible Vehicle
- 2005-2023 Toyota Tacoma
- Material
- Aluminum
- Step Width
- 6 inches
- Finish
- Black powder coated
- Cab Size
- Double Cab
- Style
- Side Steps
View on Amazon: AutoBull 6" Aluminum Running Boards Affiliate link
The AutoBull 6-inch running board is built for 2005-2023 Toyota Tacoma Double and Crew Cabs. It uses rust-resistant aluminum with a black powder-coated finish. The 6-inch step width provides a stable foothold. Each side step measures 82.6 inches long and weighs 34.2 pounds. The design includes ABS corner covers and a honeycomb anti-slip pattern. It offers side protection against road debris.
Pros
- 6-inch wide stepping surface for easier entry
- Rust-resistant aluminum construction with black powder coat
- ABS plastic corner covers protect edges
- Honeycomb anti-slip center design
Cons
- Incompatible with Access Cab models
- Does not fit 2024 Tacoma models
- Heavier build at 34.2 pounds per side
Good fit if
- You drive a 2005-2023 Toyota Tacoma Double Cab
- You prefer a wide 6-inch step surface
- You want rust-resistant aluminum side steps
Skip if
- You own a 2024 Toyota Tacoma
- You have an Access Cab with narrow rear doors
- You need stainless steel finishes
Verdict: The AutoBull 6" Aluminum Running Boards is a sturdy option for owners of 2005-2023 Toyota Tacoma Double or Crew Cabs who need a wide, durable step.
Specifications side by side
| Spec | PZ 6" Running Boards for Ford F-150 SuperCrew | Tyger Auto Trax Dual-Tube Side Steps | Tyger Auto 3.5" Rider Running Boards Ford F-150 SuperCrew | Comnova 6" Carbon Steel Side Steps | DNA Motoring 6" Aluminum Running Boards | Tyger Auto Access Running Boards | AutoBull 6" Aluminum Running Boards |
|---|---|---|---|---|---|---|---|
| Compatible Vehicle | 2015-2026 F150, 2017-2026 F250 F350 | not stated | 2015-2027 Ford F-150, F-250 F-350 SD | 2004-2014 Ford F150 | not stated | 2015-2027 F-150, 2017-2027 F-250/F-350 | 2005-2023 Toyota Tacoma |
| Cab Size | SuperCrew Cab, Crew Cab | Supercrew Cab | SuperCrew Cab | Crew Cab | Standard Cab | SuperCrew Cab | not stated |
| Material | Aluminum alloy | carbon steel | carbon steel | carbon steel | Extruded Aluminum | Carbon steel | Aluminum |
| Step Width | 6" | 6.3 inches | 3.5 in | 6 in | 6 inches | not stated | 6 inches |
| Tube Shape | not stated | dual-tubular | oval | not stated | not stated | Tubular | not stated |
| Installation | No-drill bolt-on | no-drill bolt-on | no-drill | no drilling required | No-drill installation | Easy bolt-on | not stated |
| Finish | not stated | textured black powder E-coating | powder coated | powder coated | Powder Coated | Textured black | Black powder coated |
| Weight Capacity | 500 lbs per side | 500 lb | 500 lb | not stated | 350 lb | 500 lb | not stated |
| Compatible Truck | Ford F-150, Ford F-250/350 Super Duty | Ford F-150, Ford F-250/350 Super Duty | Ford F-150, Ford F-250/350 Super Duty | Ford F-150 | Chevy Silverado, GMC Sierra | Ford F-150, Ford F-250/350 Super Duty | Toyota Tacoma |
| Width | 6-Inch | 6.3 inches | 3.5-Inch | 6-Inch | 6-Inch | 7.24 inches | 6 inches |
| Style | Side Steps | Side Steps | Nerf Bars | Side Steps | Nerf Bars | Drop Step | Side Steps |
| Dimensions | 85.4 × 8.66 × 7.87 inches | 84.9 × 6.3 × 2.36 inches | 84.7 × 2.95 × 4.61 inches | 89 × 6 × 2 inches | 56 × 9 × 8 inches | 85 × 7.24 × 5.59 inches | 82.6 × 6 × 2.1 inches |
| Weight | 38 pounds | 52.2 pounds | 40.8 pounds | 50.5 pounds | 25.8 pounds | 44.1 pounds | 34.2 pounds |
| Size | Super Crew Cab/Crew Cab | F-Series SuperCrew | F-150 (15-27) / Super Duty (17-27) SuperCrew | 04-14 F150 Crew Cab | 6-Inch-Black-Aluminum | F-150 (15-27) / Super Duty (17-27) SuperCrew | Tacoma 05-23 Crew |
| Color | Aluminum Ribbed Tread | Textured Black | Textured Black | Black | Black | Textured Black | Alu-diamond anti-slip black |
| Model | crew cab | TG-TX7F29458 | TG-SS2F35058 | not stated | STEPB-ZTL-8019-ALBK | TG-AS2F24009 | ABRB-1001 |
Readers of this guide also look at hoyixi universal case compatible 6 8 alternatives.
Frequently asked questions
Do these alternatives fit Ford F-250 and F-350 Super Duty trucks?
Yes, several options support Super Duty models. The Tyger Auto Trax Dual-Tube Side Steps fit Ford F-250 and F-350 Super Duty trucks in SuperCrew configuration. The Tyger Auto 3.5" Rider Running Boards also list compatibility with Super Duty models from 2017 to 2026. The Tyger Auto Access Drop Step includes Super Duty in its size specifications. Other listed brands focus on F-150 or non-Ford platforms.
Which running board offers the widest step surface for easier entry?
The Comnova 6" Carbon Steel Side Steps provide a wide 6-inch step surface. The Tyger Auto Trax Dual-Tube Side Steps offer a 6.3-inch width. The Tyger Auto Access Drop Step features a 7.24-inch width, which is the widest among the Ford-compatible options. The PZ 6" model provides a 6-inch step, matching the Comnova width. The Tyger Auto 3.5" Rider has a narrower 2.95-inch width.
Are there lightweight aluminum options for better fuel economy?
The PZ 6" Aluminum Running Boards weigh 38 pounds, making them lighter than steel alternatives. The DNA Motoring 6" Aluminum Running Boards are the lightest at 25.8 pounds, though they fit standard cab Chevy Silverado and GMC Sierra trucks. The AutoBull 6" Aluminum Running Boards for Toyota Tacoma weigh 34.2 pounds. Heavier steel options like the Comnova model weigh 50.5 pounds. The Tyger Auto Trax weighs 52.2 pounds.
Can I use these on older Ford F-150 Crew Cabs?
The Comnova 6" Carbon Steel Side Steps are designed for 2004 to 2014 Ford F-150 Crew Cab trucks. The PZ 6" model is specified for Ford F-150 SuperCrew Cab, which typically covers newer generations. The Tyger Auto 3.5" Rider Running Boards fit F-150 models from 2015 to 2026. You should verify your specific model year and cab configuration against the size data before purchasing.
What is the difference between side steps and drop steps?
Side steps, like the PZ 6" and Comnova models, are fixed bars that provide a constant step height. Drop steps, such as the Tyger Auto Access 7.24" model, retract when the door is closed and deploy when opened. The Tyger Auto Access Drop Step offers robust support for daily entry. Fixed side steps generally offer a wider, more stable platform for standing, while drop steps may offer a cleaner look when not in use.
Do any of these alternatives fit Toyota Tacoma or Chevy Silverado?
Yes, several options fit other brands. The AutoBull 6" Aluminum Running Boards fit Toyota Tacoma Double Cab models from 2005 to 2023. The DNA Motoring 6" Aluminum Running Boards are intended for standard cab Chevy Silverado and GMC Sierra trucks. The Tyger Auto models listed are primarily for Ford F-150 and Super Duty trucks. You must select the brand-specific product for your vehicle.