AUTOSAVER88 6 in Aluminum Running Review: Specs, Pros and Cons
As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.
This autosaver88 running boards compatible review covers the AUTOSAVER88 6 in Aluminum Running Boards. These side steps are designed for 2007-2018 Silverado and Sierra 1500 Double Cab trucks. They feature a 6-inch step width and a 450 lb weight capacity. The build uses anti-corrosion aluminum with black powder coating. Installation requires no drilling and uses factory mount points. This guide explains how these specifications translate to daily use for your vehicle setup.
What stands out
- 6-inch step width provides ample footing for entry and exit
- 450 lb weight capacity supports heavy daily use
- No-drill bolt-on installation aligns with existing factory holes
- Anti-corrosion aluminum construction with black powder coating for durability
Who it fits
Good fit for
This product suits owners of Double Cab or Extended Cab Silverado and Sierra trucks who need a sturdy step. The 6-inch width helps when wearing bulky work boots or cargo. The 450 lb capacity ensures stability for larger drivers. If you prefer a simple bolt-on install without modifying your truck, this aluminum option fits your needs. It is ideal for those wanting rust-resistant hardware that matches the truck bed.
Who should skip it
Skip this if you drive a Crew Cab with four full-size doors. The listing explicitly states it does not fit Crew Cab models. It also does not fit diesel models equipped with a DEF tank. If you require a wider step than 6 inches, this may feel narrow. Additionally, if you prefer a silver finish over black, check the available variations carefully before purchasing.
Verdict: This is a solid, spec-driven choice for Double Cab owners needing a durable, no-drill step. The 6-inch width and 450 lb capacity make it practical for daily use.
Key specs explained for this product
Material: Aluminum
The steps are made from anti-corrosion aluminum with rust-resistant black powder coatings. This material choice ensures durability against road salt and weather. You get a one-piece design that maintains its look over time. Aluminum is lighter than steel, which helps when handling the 33-pound weight during installation. This construction supports the 450 lb capacity without bending.
Step Width: 6 in
The step pad is 6 inches wide. This provides ample surface area for your boot, improving stability when entering or exiting your truck. A wider step reduces the chance of slipping off the edge. This width is standard for many side steps, offering a balance between coverage and aerodynamics. It allows for easy movement, including stepping in or out safely.
Weight Capacity: 450 lb
The running boards can support up to 450 pounds. This high capacity ensures safety for most adults and allows for dynamic movements like jumping off the step. It indicates robust internal structure and secure mounting points. When comparing options, this spec helps you verify if the steps can handle your weight plus any gear. It is a key metric for structural integrity.
Installation: No drilling required
These boards bolt directly to factory holes, eliminating the need for drilling. This preserves your truck's original structure and warranty. Installation typically takes less than an hour using the included brackets and hardware. This feature appeals to those who want a clean look without permanent modifications. It simplifies the process for DIYers, though professional installation is still recommended.
Design and Build Quality
The listing describes the steps as a one-piece design made from anti-corrosion aluminum. This material choice helps resist rust and corrosion from road salt or rain. The surface features a black powder coating finish. You get a solid, uniform look that is intended to last. The steps measure six inches in width and two inches in height. Each side panel is seventy-seven inches long. The total weight for the pair is thirty-three pounds. This makes them lighter than steel alternatives, which can help with fuel efficiency.
The layout includes a six-inch non-slip injection step pad. This wider surface gives you more room for your boots when entering or exiting the truck. The listing states a weight capacity of 450 lbs. You can step on them with confidence, even if you jump down. The brackets and hardware are included in the package. The design aligns with factory holes, allowing for bolt-on installation without drilling.
According to the listing, these steps fit Double Cab models only. They do not fit Crew Cab trucks with four full-size doors. You should verify your cab size before purchasing. The design is specific to 2007-2018 Silverado and Sierra 1500 models. It also works with the 2019 Legacy and HD versions. Note that diesel models with a DEF tank are not compatible. The physical structure is built for strength and durability in daily use.
Installation and Daily Use Guide
Setting up these running boards involves a straightforward bolt-on process. The listing states that no drilling is required for installation. You align the mounts with the factory holes on your truck. The package includes six brackets and all necessary hardware for this task. The design ensures that factory holes match the mounting points perfectly. You can complete the assembly in less than an hour. The instructions are included in the box, though professional installation is recommended. This setup method preserves the vehicle’s original structure while adding functionality.
In daily use, the 6-inch step width provides a stable platform. The injection-molded step pad offers a non-slip surface for secure footing. This width allows for easy movement when entering or exiting the cab. The steps support a weight capacity of 450 pounds. This limit applies to stepping in, stepping out, or even jumping onto the board. The one-piece aluminum construction ensures consistent performance over time. The black powder coating resists rust and corrosion from road salt or rain.
These boards are compatible with 2007-2018 Silverado and Sierra 1500 Double Cab trucks. They also fit the 2019 Silverado 1500 Legacy and Sierra 1500 Limited models. The 2019 Silverado 2500HD and 3500HD are also supported. Note that they do not fit diesel models equipped with a DEF tank. The design is strictly for extended or double cabs with two full-size front doors and two narrower rear doors. They are not suitable for crew cabs with four full-size doors. The 6-inch width and 2-inch height create a practical step for everyday access.
Before You Buy This Step
Before you buy, verify your truck’s cab size. These boards fit only Double Cab models with two full-size front doors and two narrower rear doors. They do not fit Crew Cab trucks with four full-size doors. Also, check if your vehicle is a 2019+ Silverado 2500HD or 3500HD. Diesel models with a DEF tank are not compatible. You should inspect the mounting area for rust before installation. Although no drilling is required, cleaning the factory holes ensures a secure fit. Use a mild soap and water solution to clean the black powder-coated aluminum steps regularly. This upkeep prevents dirt buildup on the non-slip step pad. These running boards complement your truck’s existing accessories well. They provide easy access to the bed, making it simpler to load tonneau covers or other cargo. Ensure your chosen cover does not interfere with the step’s 6-inch width. Proper fitment is key to maintaining a clean, integrated look for your vehicle.
Check before you buy
- Confirm your truck is a Double Cab, not Crew Cab.
- Check for DEF tank on diesel models to ensure fit.
- Clean factory mounting holes before bolting the brackets in place.
- Verify step width does not interfere with your tonneau cover.
The product at a glance
AUTOSAVER88 6 in Aluminum Running Boards
Best for: Double Cab trucks needing durable step access
- Compatible Vehicle
- 2007-2018 Silverado/Sierra 1500
- Cab Size
- Double Cab, Extended Cab
- Material
- Aluminum
- Step Width
- 6 inches
- Installation
- No-drill bolt-on
- Finish
- Black powder coated
View on Amazon: AUTOSAVER88 6 in Aluminum Running Boards Affiliate link
This AUTOSAVER88 running board is designed for 2007-2018 Silverado and Sierra 1500 Double Cabs. It features a 6-inch wide step with a 450 lb weight capacity. The unit is made from anti-corrosion aluminum with a black powder coat finish. Installation requires no drilling, using existing factory holes. It includes brackets and hardware for a bolt-on setup.
Pros
- 6-inch wide non-slip injection step pad
- 450 lb weight capacity
- No drilling required for installation
- Anti-corrosion aluminum construction
Cons
- Not compatible with Diesel models equipped with a DEF tank
- Does not fit Crew Cab trucks with four full-size doors
- Professional installation is recommended despite bolt-on design
Good fit if
- You own a Double Cab Silverado or Sierra 1500
- You need a step with a 450 lb load rating
- You prefer a bolt-on install without drilling
Skip if
- You drive a Crew Cab truck
- Your diesel model has a DEF tank
- You need a silver finish option
Verdict: AUTOSAVER88 6 in Aluminum Running Board offers a sturdy 450 lb capacity step for Double Cab trucks, making it a solid choice for owners seeking durable, no-drill access.
Specifications side by side
| Spec | AUTOSAVER88 6 in Aluminum Running Boards |
|---|---|
| Compatible Vehicle | 2007-2018 Silverado/Sierra 1500 |
| Cab Size | Double Cab, Extended Cab |
| Material | Aluminum |
| Step Width | 6 inches |
| Installation | No-drill bolt-on |
| Finish | Black powder coated |
| Weight Capacity | 450 lbs |
| Compatible Truck | Chevy Silverado, GMC Sierra |
| Style | Nerf Bars |
| Dimensions | 77 × 6 × 2 inches |
| Weight | 33 pounds |
| Size | 6"-W |
| Color | Black |
| Model | NMQFBG1 |
Frequently asked questions
What is the weight capacity of these AUTOSAVER88 steps?
The steps support up to 450 pounds. This load limit allows most adults to step up safely without flexing the aluminum. The sturdy construction helps maintain stability during daily entry and exit from your truck bed.
Do these running boards require drilling for installation?
No drilling is required for installation. The system uses a direct bolt-on design that aligns with factory holes on your vehicle. You receive six brackets and all necessary hardware in the package to complete the setup quickly.
What is the step width on this model?
The step width measures six inches. This width provides a solid foothold for your boots. The dimensions are 6 inches wide by 2 inches high, offering a balanced surface area for safe climbing into your truck cab.
Which trucks are compatible with these running boards?
These boards fit Chevy Silverado and GMC Sierra models. They are specifically designed for Double Cab versions from 2007 to 2018. You must verify your cab size, as they do not fit Crew Cab trucks or newer 2019+ models.
How much does the set weigh?
The complete set weighs 33 pounds. This weight reflects the solid aluminum construction used for durability. The manageable weight makes handling and positioning the steps easier during the installation process on your truck's side panels.
What finish do these aluminum steps have?
The steps feature a black powder coat finish. This coating protects the anti-corrosion aluminum from rust and weather damage. The black color provides a uniform look that complements most truck exteriors while resisting road salt and debris.