AUTOSAVER88 vs XTWEEX: Tonneau Covers Compared by Specs
As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.
This AUTOSAVER88 vs XTWEEX tonneau cover comparison focuses on soft roll-up designs for different truck beds. Both covers offer no-drill installation and waterproof PVC materials. The main difference lies in their compatible vehicles and specific bed dimensions. AUTOSAVER88 targets the Toyota Tacoma with a 5-foot bed, while XTWEEX fits Chevy Silverado and GMC Sierra trucks with a 5.8-foot bed. You should check your truck model and bed size before deciding which cover fits your needs.
Key differences
| Aspect | AUTOSAVER88 Soft Roll-Up Tonneau Cover for Tacoma 5 ft | XTWEEX Soft Roll-Up 5.8 ft |
|---|---|---|
| Compatible Truck | 2016-2023 Toyota Tacoma | 2007-2026 Chevy Silverado, GMC Sierra 1500 |
| Bed Size | 5 ft / 60.5 in | 5.8 ft |
| Material | Double-layer PVC, aluminum framework | Dual-coated PVC |
| Lock Type | Spring latching system | not listed |
| Cover Style | Soft Roll-Up | Soft Roll-Up |
Which one should you choose?
Choose AUTOSAVER88 Soft Roll-Up Tonneau Cover for Tacoma 5 ft if
- You own a 2016-2023 Toyota Tacoma with a 5-foot bed
- You prefer an aluminum framework for added rigidity
- You want a visible spring latching system for securing the cover
Choose XTWEEX Soft Roll-Up 5.8 ft if
- You drive a Chevy Silverado or GMC Sierra with a 5.8-foot bed
- You need a cover compatible with trucks from 2007 through 2026
- You prioritize a dual-coated PVC surface for chemical corrosion resistance
Verdict: Choose the AUTOSAVER88 if you have a Tacoma and value the structural support of an aluminum framework. Pick the XTWEEX if you drive a Silverado or Sierra and need a cover that fits a slightly longer 5.8-foot bed. Always verify your exact bed length before purchasing.
AUTOSAVER88 vs XTWEEX Spec Comparison
Cover Style
Both products utilize a soft roll-up design, allowing you to access the entire truck bed by rolling the cover up toward the bulkhead. AUTOSAVER88 features a double-layer PVC cover that resists tear and abrasion, paired with sturdy aluminum framework and side rails. XTWEEX uses dual-coated PVC waterproof cloth, which provides high tear strength and chemical corrosion resistance. Both structures are classified as soft, offering flexibility and lightweight operation. The primary difference is the material construction details, with AUTOSAVER88 emphasizing its aluminum internal support and XTWEEX highlighting its dual-coated fabric surface for moisture resistance.
Compatible Truck
These covers are designed for completely different vehicle platforms, making direct fitment comparison impossible without matching your specific truck. AUTOSAVER88 is engineered specifically for the 2016 through 2023 Toyota Tacoma with a 5-foot bed, excluding the Trail Edition. It requires a deck rail system for proper installation. XTWEEX is built for the 2007 through 2026 Chevy Silverado and GMC Sierra 1500 with a 5.8-foot bed. If you own a Toyota, the AUTOSAVER88 is the correct choice. If you drive a Silverado or Sierra, the XTWEEX is the only compatible option listed in this comparison.
Bed Size
The bed dimensions dictate the physical length of the cover and its fitment. AUTOSAVER88 fits a 5-foot bed, specified as 60.5 inches in length. XTWEEX fits a 5.8-foot bed, which is longer than the Tacoma bed size. This difference in bed length means the covers are not interchangeable. The AUTOSAVER88 cover itself has a listed length of 64.2 inches, while specific dimensions for the XTWEEX cover are not provided in the data. You must select the cover that matches your truck's exact bed size to ensure proper coverage and secure latching along the rails.
Material Build
Both covers prioritize durability through PVC materials, but the construction methods differ. AUTOSAVER88 uses a double-layer PVC cover supported by an aluminum framework and stainless steel clamps. This combination creates a strong seal and resists wrinkles or folds via an adjustable tension system. XTWEEX employs dual-coated PVC waterproof cloth, which offers moisture resistance and an easy-to-clean surface. It also claims chemical corrosion resistance. The AUTOSAVER88 design includes arched crossbars to direct water flow, while XTWEEX relies on the dual-coated fabric for waterproofing. Both aim for long-lasting protection against the elements.
Installation Method
Installation for both products is designed to be tool-free and non-invasive. AUTOSAVER88 uses no-drill clamps that fasten the rails directly to the truck bed, with instructions and hardware included. It requires no special tools. XTWEEX also features a no-drill clamp-on design, claiming full installation in under 30 minutes. It similarly requires no drilling or special tools. Both systems allow you to attach the cover and roll it up quickly. The process is straightforward for both, focusing on ease of use without modifying your truck's bed structure.
Which Tonneau Cover Fits Your Truck Bed
Tacoma owner with 5-foot bed needing secure seal
This cover is built for the 2016-2023 Toyota Tacoma 5-foot bed. It features an aluminum framework that creates a strong seal. The adjustable tension system prevents wrinkles. A spring latching system keeps the cover tight. You get double-layer PVC that resists tears. The arched crossbars help water flow off the surface effectively.
Silverado or Sierra owner with 5.8-foot bed
This option fits the 5.8-foot bed on 2007-2026 Silverado and Sierra trucks. It uses dual-coated PVC cloth for water resistance. The material offers high tear strength and chemical corrosion resistance. You can install it in under 30 minutes without drilling. The black fabric protects cargo from dirt and dust.
Driver prioritizing structural rigidity and tension control
The AUTOSAVER88 model includes a sturdy aluminum framework. This structure works with stainless steel clamps for a secure fit. The tension system is adjustable to maintain an even fit. This prevents folds that could catch wind. The spring latching system adds reliability. You get a roll-up design that accesses the full bed while maintaining structural integrity.
Owner seeking quick installation and chemical resistance
The XTWEEX cover highlights easy installation in under 30 minutes. You clamp the rails without special tools. The dual-coated PVC provides chemical corrosion resistance. This protects the cover from road salts and cleaners. The soft roll-up style allows full bed access. The design focuses on lightweight durability and moisture resistance for daily use.
The products compared
AUTOSAVER88 Soft Roll-Up Tonneau Cover for Tacoma 5 ft
Best for: Tacoma owners needing basic bed protection
- Compatible Truck
- 2016-2023 Toyota Tacoma
- Bed Size
- 5 ft (60.5")
- Cover Style
- Soft Roll-Up
- Material
- Double-layer PVC, Aluminum
- Lock Type
- Spring Latching System
- Dimensions
- 64.2 × 9.84 × 5.11 inches
View on Amazon: AUTOSAVER88 Soft Roll-Up Tonneau Cover for Tacoma 5 ft Affiliate link
This AUTOSAVER88 soft roll-up tonneau cover fits 5-foot beds on 2016-2023 Toyota Tacoma models with a deck rail system. It uses a double-layer PVC cover over an aluminum frame for durability. The design features arched crossbars to shed water and no-drill clamps for easy installation. You get a spring latching system with adjustable tension to keep the cover tight and wrinkle-free.
Pros
- Double-layer PVC material resists tears and abrasion
- Arched crossbars direct water flow off the surface
- No-drill clamps allow for painless installation
- Adjustable tension system prevents wrinkles and folds
Cons
- Limited to 5-foot bed size only
- Excludes Toyota Tacoma Trail Edition models
- Spring latch is less secure than key locks
Good fit if
- You own a 2016-2023 Toyota Tacoma with a 5-foot bed
- You want a soft cover that rolls up to the bulkhead
- You prefer a no-drill installation process
Skip if
- You drive a Toyota Tacoma Trail Edition
- You need a hard folding or tri-fold design
- You have a 6-foot bed instead of a 5-foot bed
Verdict: AUTOSAVER88 5ft Soft Roll-Up for Tacoma is a solid option for Tacoma owners with standard 5-foot beds who value easy installation and basic weather protection. It fits buyers who do not need heavy-duty security features.
XTWEEX Soft Roll-Up 5.8 ft
Best for: Quick installation and easy bed access
- Compatible Truck
- 2007-2026 Silverado Sierra 1500
- Bed Size
- 5.8 ft
- Cover Style
- Soft Roll-Up
- Material
- Dual-Coated PVC
- Installation
- No Drilling
- Waterproof
- Waterproof
View on Amazon: XTWEEX Soft Roll-Up 5.8 ft Affiliate link
This XTWEEX soft roll-up cover fits 5.8 ft beds on 2007-2026 Chevy Silverado and GMC Sierra 1500 trucks. It uses dual-coated PVC fabric for water and tear resistance. The design allows for a no-drilling installation that takes under 30 minutes. You get a lightweight, easy-to-clean surface that rolls up securely. It provides basic cargo protection without complex hardware or permanent modifications to your truck bed rails.
Pros
- Fits 5.8 ft beds on 2007-2026 Silverado and Sierra 1500
- Dual-coated PVC material resists water, tears, and corrosion
- No-drilling clamp installation completes in under 30 minutes
- Lightweight soft roll-up design allows full bed access
Cons
- Soft PVC fabric offers less security than hard folding options
- Waterproof rating is not absolute; some moisture may enter seams
- No mention of integrated tie-down points or cargo management features
Good fit if
- You need a quick, tool-free upgrade for your Silverado or Sierra
- You prioritize easy access to the entire 5.8 ft bed space
- You want a lightweight cover that resists rain and dirt
Skip if
- You require maximum cargo security with a hard lockable cover
- You drive a truck with a 5.3 ft or 6.2 ft bed
- You need integrated tie-downs or heavy-duty weather sealing
Verdict: XTWEEX 5.8ft Soft Roll-Up Tonneau Cover suits owners of 2007-2026 Silverado and Sierra 1500 trucks who want a simple, no-drill solution for rain protection and bed access.
Specifications side by side
| Spec | AUTOSAVER88 Soft Roll-Up Tonneau Cover for Tacoma 5 ft | XTWEEX Soft Roll-Up 5.8 ft |
|---|---|---|
| Compatible Truck | 2016-2023 Toyota Tacoma | 2007-2026 Silverado Sierra 1500 |
| Bed Size | 5 ft (60.5") | 5.8 ft |
| Cover Style | Soft Roll-Up | Soft Roll-Up |
| Material | Double-layer PVC, Aluminum | Dual-Coated PVC |
| Lock Type | Spring Latching System | not stated |
| Installation | not stated | No Drilling |
| Waterproof | not stated | Waterproof |
| Structure | Soft | Soft |
| Dimensions | 64.2 × 9.84 × 5.11 inches | not stated |
| Size | 5' | 5.8ft for 2007-2026 |
| Color | black | Black |
| Model | MAAUTueOMl | XT-NR094 |
Frequently asked questions
Does the AUTOSAVER88 fit a 5-foot Tacoma bed?
Yes, the AUTOSAVER88 is designed specifically for the 5-foot bed on Toyota Tacoma trucks. The cover measures 64.2 inches in length, which aligns with the standard 5-foot bed dimensions. This ensures a proper fit without requiring modifications to the truck bed itself.
Will the XTWEEX cover work on my Silverado?
The XTWEEX soft roll-up cover is compatible with Chevy Silverado and GMC Sierra trucks. It is engineered for models produced between 2007 and 2026 with a 5.8-foot bed. You should verify your specific truck year and bed size to ensure compatibility before purchasing.
Are both covers made of soft material?
Yes, both the AUTOSAVER88 and XTWEEX feature a soft structure. They utilize soft roll-up designs that allow you to roll the cover back toward the cab. This style provides easy access to your entire truck bed while maintaining a low profile when fully closed.
What is the width of the AUTOSAVER88 cover?
The AUTOSAVER88 cover has a width of 9.84 inches. This measurement refers to the rolled-up bundle size when the cover is secured at the front of the bed. The height of the rolled cover is 5.11 inches, allowing for a compact storage profile.
Does the XTWEEX cover include a model number?
Yes, the XTWEEX cover is identified by the model number XT-NR094. This specific model is designed for 5.8-foot beds on compatible Chevy and GMC trucks. The cover is available in black, matching the aesthetic of most modern truck beds.
Can I use the AUTOSAVER88 on a 6-foot bed?
No, the AUTOSAVER88 is strictly for 5-foot beds. Its length is 64.2 inches, which is tailored for the shorter bed size found on specific Tacoma models. Using it on a 6-foot bed would result in a poor fit and inadequate coverage.
Is the XTWEEX cover suitable for winter weather?
The XTWEEX cover is designed for rain protection and general weather resistance. Its soft roll-up structure helps shield your cargo from the elements. While it offers basic protection, it is primarily intended for easy bed access and standard weather defense rather than extreme conditions.