Looking Beyond the Comnova Autopart COMNOVA 6" Running Boards? 6 Alternatives Worth a Look

Comparing 6 Alternatives to Comnova

AUTOSAVER88 6-Inch Aluminum Running Boards

The AUTOSAVER88 6-Inch Aluminum Running Boards use aluminum instead of galvanized steel, which reduces weight to 37 pounds compared to the Comnova’s 49.6 pounds. This makes them easier to handle during installation. They feature a 3-inch height, which is one inch higher than the Comnova’s 2-inch step, potentially offering slightly better ground clearance. Both models share a 6-inch width and black finish, ensuring similar footing stability. The aluminum construction provides inherent rust resistance, whereas the Comnova relies on a powder coat. If you prioritize a lighter step that resists corrosion naturally, this aluminum option is a practical alternative for older Crew Cab trucks.

COMNOVA 6" Running Boards for Silverado/Sierra Crew Cab

This Comnova model targets newer 2019-2026 Crew Cab trucks, unlike the original which fits 2007-2018 models. It shares the 6-inch width and 2-inch height but uses carbon steel rather than galvanized steel. The key difference is the slider design, allowing you to adjust the position forward or backward for customization. Both models support 500 pounds and use direct bolt-on installation without drilling. The newer version maintains the same 49.6-pound weight and textured black finish. If you own a newer Silverado or Sierra and want the ability to fine-tune the step placement, this adjustable carbon steel option is the logical choice over the fixed-mount older model.

Tyger Auto Access Drop Step Running Boards

The Tyger Auto Drop Step offers a significantly wider 7.24-inch step surface compared to the Comnova’s 6 inches. This extra width provides a more stable footing for passengers. It stands 5.59 inches high, which is much higher than the Comnova’s 2-inch profile, altering the vehicle’s stance. The weight is 46.1 pounds, slightly lighter than the Comnova’s 49.6 pounds. Both use a black finish and direct bolt-on installation. The drop step design prioritizes a broad, flat surface over the sleeker look of tube-style running boards. If you need maximum foot stability and do not mind a higher, bulkier profile, this wider step is a sturdy upgrade for Crew Cab trucks.

AUTOSAVER88 7.87" Silverado Running Boards

The AUTOSAVER88 7.87-Inch model provides the widest step in this list at 7.87 inches, offering more room for entry and exit than the Comnova’s 6-inch step. It is designed for 2019-2026 Crew Cabs, matching the newer Comnova variant. The height is 8.66 inches, which is substantially higher than the Comnova’s 2 inches, affecting ground clearance. It weighs 47.8 pounds, similar to the Comnova. Both feature a black finish and direct bolt-on installation. The stainless steel build ensures durability against rust. If you drive a newer truck and want the widest possible step surface for heavy-duty daily use, this wider, heavier-duty option is a robust alternative.

Tyger Auto 3.5" Rider Oval Running Boards

The Tyger Auto 3.5-Inch Rider Oval Running Boards differ significantly in design, using an oval tube style rather than a flat step. The effective width is 2.95 inches, which is narrower than the Comnova’s 6-inch surface. This model stands 4.61 inches high, providing more ground clearance than the Comnova’s 2-inch step. It weighs only 34.4 pounds, making it much lighter than the Comnova’s 49.6 pounds. Both use a black finish and direct bolt-on installation. The oval shape offers a sleeker aesthetic but less foot space. If you prefer a lighter, more streamlined look and do not need a wide flat step, this oval tube option is a suitable choice for daily driving.

Tyger Auto 3.5" Rider Oval Running Boards

This Tyger Auto 3.5-Inch Rider Oval model also features a tube design with a 4.61-inch effective width, which is narrower than the Comnova’s 6-inch flat step. It is designed for 2019-2026 Crew Cabs, aligning with newer truck models. The height is 2.95 inches, slightly higher than the Comnova’s 2-inch step. It weighs 38.8 pounds, lighter than the Comnova’s 49.6 pounds. Both use a black finish and direct bolt-on installation. The oval tube style offers better ground clearance and a different visual profile. If you want a corrosion-resistant, lighter step for newer trucks and prefer a tube design over a wide platform, this oval option is a practical alternative.

Quick picks

Our 7 picks

1 Best overall

COMNOVA 6" Running Boards for Silverado/Sierra Crew Cab

Best for: older crew cab trucks needing high weight capacity

Compatible Vehicle

2007-2018 Silverado/Sierra 1500

Cab Size

Crew Cab

Material

Carbon steel

Step Width

6-inch

Installation

Direct bolt-on, no need to drill

Finish

Powder coated

View on Amazon: COMNOVA 6" Running Boards for Silverado/Sierra Crew Cab Affiliate link

These Comnova running boards are built from heavy-duty galvanized steel with a powder-coated finish for rust resistance. The 6-inch wide step offers secure footing for crew cab owners. They mount directly to the frame without drilling. Each bar supports up to 500 lbs. The slider design allows forward and backward adjustment for precise fitment on your vehicle.

Pros

• 6-inch wide step for secure footing
• Heavy-duty galvanized steel construction
• 500 lbs weight capacity per bar
• Adjustable slider design for customization
• Direct bolt-on installation without drilling

Cons

• Limited to crew cab models only
• Not compatible with diesel engine variants
• Excludes 2020-2025 model years

Good fit if

• You own a 2007-2018 Silverado or Sierra crew cab
• You need a high weight capacity for loading
• You want adjustable fitment for precise alignment

Skip if

• You drive a double cab truck
• You have a diesel engine model
• You own a 2020 or newer Silverado

Verdict: Comnova 6" Galvanized Steel Running Boards provide a sturdy, high-capacity step for older crew cab trucks. They are the right choice if you need a robust, adjustable mount for heavy-duty use.

2 Best budget

AUTOSAVER88 6-Inch Aluminum Running Boards

Best for: rust-resistant steps for older Crew Cabs

Compatible Vehicle

2007-2018 Silverado/Sierra 1500

Cab Size

Crew Cab

Material

aluminum alloy

Step Width

6-inch

Installation

bolt-on, no-drill

Finish

powder coated

View on Amazon: AUTOSAVER88 6-Inch Aluminum Running Boards Affiliate link

This is a pair of 6-inch aluminum alloy running boards for 2007-2018 Silverado and Sierra Crew Cab trucks. The powder-coated finish resists rust and UV damage. The closed-end design blocks road debris. You get a 450 lb weight capacity with a no-drill bolt-on installation. These steps protect your rocker panels while offering a sturdy climb.

Pros

• Aluminum alloy construction for rust resistance
• 450 lb weight capacity
• 6-inch wide step pad
• Closed-end design blocks debris
• No-drill bolt-on installation

Cons

• Excludes diesel models with DEF tank
• Only available for Crew Cab
• Limited to 2007-2018 model years

Good fit if

• You drive a 2007-2018 Silverado or Sierra Crew Cab
• You want rust-resistant aluminum steps
• You prefer a wider 6-inch step

Skip if

• You have a diesel truck with a DEF tank
• You need steps for a Double Cab
• You own a 2019 or newer model

Verdict: AUTOSAVER88 6" Aluminum Running Boards offer solid protection for 2007-2018 Crew Cab trucks, making them a practical upgrade for owners seeking durable, rust-resistant steps.

3 Best premium

COMNOVA 6" Running Boards for Silverado/Sierra Crew Cab

Best for: Crew cab trucks needing a wide, adjustable step

Compatible Vehicle

2019-2026 Chevy Silverado/Sierra 1500

Cab Size

Crew Cab

Material

Carbon steel

Step Width

6 in

Installation

No-drill

Finish

Black powder coated

View on Amazon: COMNOVA 6" Running Boards for Silverado/Sierra Crew Cab Affiliate link

This Comnova running board fits 2019-2026 Chevy Silverado and GMC Sierra 1500 Crew Cab trucks. It features a 6-inch wide carbon steel step with a black powder-coated finish. The slider tube design allows forward and backward adjustment for precise fitment. You get slip-resistant plastic step pads and end caps for better traction. It installs without drilling, making it a straightforward upgrade for crew cab owners.

Pros

• 6-inch wide step provides secure footing
• Heavy-duty carbon steel construction with black powder coating
• Adjustable slider position for custom fitment
• Slip-resistant plastic step pads included

Cons

• Limited to Crew Cab models only
• Does not fit Double Cab or Extended Cab variants
• Heavier build at 49.6 pounds per side

Good fit if

• You own a 2019-2026 Silverado or Sierra 1500 Crew Cab
• You prefer a wider step for easier entry
• You want adjustable mounting for precise alignment

Skip if

• You drive a Double Cab or Extended Cab truck
• You need a stainless steel finish
• You require compatibility with 2019 Silverado 1500 LD

Verdict: Comnova 6-Inch Slider Running Boards suits crew cab owners who value a wide, adjustable step. It offers sturdy carbon steel construction and simple no-drill installation for 2019-2026 models.

4 Best drop step

Tyger Auto Access Drop Step Running Boards

Best for: Crew Cab trucks needing wide step support

Cab Size

Crew Cab

Material

2 inch diameter carbon steel

Step Width

7.24 inches

Tube Shape

Tubular

Installation

No-drill bolt-on

Finish

Textured black

View on Amazon: Tyger Auto Access Drop Step Running Boards Affiliate link

This Tyger Auto drop step offers a wide 7.24 inch step width for stable footing. It features a heavy-duty 2 inch carbon steel tube frame with a textured black finish. The unit provides a 500 lb weight capacity and installs via no-drill bolt-on hardware. It fits Crew Cab Chevy Silverado and GMC Sierra models from 2019 to 2027.

Pros

• 7.24 inch step width for ample foot space
• 500 lb weight capacity on a tubular frame
• No-drill bolt-on installation with included hardware
• Textured black finish resists corrosion and rust

Cons

• Heavier build at 46.1 pounds
• Limited to Crew Cab configurations only
• No remote or app integration available

Good fit if

• You need a wide step for easier entry
• You prefer a durable steel tube design
• You drive a Crew Cab Silverado or Sierra

Skip if

• You own a Double Cab or Extended Cab
• You require a lighter weight accessory
• You want a sleek oval tube profile

Verdict: Tyger Auto 7.24 Inch Drop Step is a sturdy option for Crew Cab owners who prioritize a wide, stable step surface and high load capacity. It suits drivers who value straightforward bolt-on installation over aesthetic tube shapes.

5 Best stainless steel

AUTOSAVER88 7.87" Silverado Running Boards

Best for: Crew Cab trucks needing wide, heavy-duty steps

Compatible Vehicle

2019-2026 Silverado/Sierra 1500, HD

Cab Size

Crew Cab

Material

stainless steel

Step Width

6 in

Installation

no-drill bolt-on

Finish

black powder coated

View on Amazon: AUTOSAVER88 7.87" Silverado Running Boards Affiliate link

These AUTOSAVER88 running boards fit 2019-2026 Silverado and Sierra Crew Cabs. They measure 7.87 inches wide and 85 inches long. The step area is 6 inches wide with honeycomb anti-slip pads. They support 450 pounds per side. High-strength stainless steel and ABS covers resist rust and corrosion. The black powder-coated finish handles daily wear. They bolt on without drilling.

Pros

• 7.87-inch width offers a broad step surface
• Supports 450 pounds on each side
• Honeycomb anti-slip pads improve traction
• Stainless steel construction resists rust and corrosion

Cons

• Heavier at 47.8 pounds compared to lighter alternatives
• No mention of LED lighting integration
• Limited to Crew Cab models only

Good fit if

• You need a wide step for easier entry
• You want rust-resistant stainless steel construction
• You drive a 2019-2026 Crew Cab Silverado or Sierra

Skip if

• You drive a Double Cab or Extended Cab
• You prefer a lighter step under 40 pounds
• You want integrated LED lighting for night visibility

Verdict: AUTOSAVER88 7.87" Silverado Running Boards suit drivers who prioritize a wide, sturdy step for Crew Cab trucks. The 450-pound capacity and stainless steel build make them a durable option for daily use.

6 Also great

Tyger Auto 3.5" Rider Oval Running Boards

Best for: daily drivers needing wide stable steps

Cab Size

Crew Cab

Material

Carbon steel

Step Width

3.5 inches

Tube Shape

Oval

Installation

Bolt-on, no drilling required

Finish

E-coating heavy textured powder finish

View on Amazon: Tyger Auto 3.5" Rider Oval Running Boards Affiliate link

This Tyger Auto running board features a 3.5-inch oval step pad for wider footing. It is built from carbon steel with a textured black powder finish for rust protection. The unit supports 500 lb and installs via bolt-on brackets without drilling. It fits Crew Cab Silverado and Sierra models from 2007 to 2019.

Pros

• 3.5-inch wide oval step pad for greater stability
• 500 lb weight capacity for heavy use
• Seamless carbon steel construction with E-coating
• No drilling required for bolt-on installation

Cons

• Heavier at 34.4 pounds than slim tube alternatives
• Lower ground clearance of 13 inches may limit off-road use
• Only available in textured black or stainless steel

Good fit if

• You want a wider step surface for easier entry
• You prefer durable carbon steel over aluminum
• You need a simple bolt-on install without drilling

Skip if

• You require higher ground clearance for off-roading
• You prefer a lighter aluminum construction
• You need a stainless steel finish only

Verdict: Tyger Auto 3.5" Oval Tube Running Boards offer a stable, wide step for daily drivers who prioritize durability and easy installation over minimal weight or maximum ground clearance.

7 Also great

Tyger Auto 3.5" Rider Oval Running Boards

Best for: Crew Cab trucks needing wide, stable steps

Compatible Vehicle

2019-2026 Silverado/Sierra 1500-3500HD

Cab Size

Crew Cab

Material

Carbon steel

Step Width

3.5 in

Tube Shape

Oval

Installation

No-drill bolt-on

View on Amazon: Tyger Auto 3.5" Rider Oval Running Boards Affiliate link

The Tyger Auto 3.5" Rider Oval Tube running boards offer a wide step for 2019-2026 Chevy Silverado and GMC Sierra Crew Cabs. The 3.5-inch oval tube provides more foot stability than round designs. You get a 500 lb weight capacity and a textured black finish. Installation is a no-drill bolt-on process that takes about 20 minutes.

Pros

• 3.5-inch oval tube step pad for increased stability
• 500 lb weight capacity
• Seamless carbon steel construction with textured powder E-coating
• No-drill bolt-on installation in approximately 20 minutes

Cons

• Limited to Crew Cab configurations only
• Heavier build at 38.8 pounds
• No mention of stainless steel finish option in key specs

Good fit if

• You need a wider step surface for easier entry and exit
• You want a durable carbon steel build that resists rust
• You prefer a quick installation without drilling into your truck

Skip if

• You drive a double cab or extended cab model
• You require a stainless steel finish for a polished look
• You need running boards for 2007-2018 Silverado or Sierra models

Verdict: Tyger Auto 3.5" Rider Oval Tube is a sturdy option for Crew Cab owners who prioritize step width and corrosion resistance. It fits you if you want a heavy-duty, easy-to-install solution for 2019-2026 Silverado or Sierra trucks.

Specifications side by side

Frequently asked questions

See also

• roc 10 6 inflatable paddle board alternatives
• best single board computers with WiFi 6