DNA Motoring TTC-RU-015 Soft Roll-Up Review: Specs, Pros and Cons
As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.
The dna motoring ttc ru 015 truck bed soft vinyl roll up tonneau cover is a practical accessory for truck owners. It is designed specifically for the 2015 to 2020 Ford F-150 models with a 5.5-foot Fleetside bed. This cover uses a soft vinyl material that rolls up manually. It relies on elastic straps to stay in place when stored. The design focuses on ease of installation without drilling. You get a lightweight cover that weighs less than thirty pounds. This setup helps improve aerodynamics and protect your cargo from weather.
What stands out
- Compatible with 2015-2020 Ford F-150 5.5ft Fleetside beds
- Soft vinyl construction with anti-curl corners
- Plug-and-play installation using included clamps
- Rubber weather seals for bed protection
- Manual roll-up operation with elastic straps
Who it fits
Good fit for
This cover suits owners of 2015-2020 Ford F-150 trucks with 5.5-foot Fleetside beds who want a simple, low-profile solution. If you prefer a lightweight cover that does not require tools or drilling, this manual roll-up design is a good fit. The soft vinyl material offers flexibility and easy storage. The included clamps make installation straightforward for most users. It is ideal for those who need basic weather protection and improved aerodynamics without the complexity or weight of a hard cover.
Who should skip it
You should look elsewhere if you drive a truck with a different bed size or type, such as a Styleside or a 6.5-foot bed. This product is also not suitable for owners of Ford F-150 models outside the 2015-2020 range. Additionally, if you frequently install a bedliner, note that modifications may be required for proper fitment. Those seeking a hard, rigid cover for maximum security or a tri-fold design for easier partial access will find better options in the available variations.
Verdict: The DNA Motoring TTC-RU-015 is a straightforward, lightweight soft cover for 2015-2020 F-150 Fleetside owners. It offers easy installation and basic protection without the bulk of harder alternatives.
DNA Motoring Cover Key Specs
Compatible Truck: 2015-2020 Ford F150
This listing is engineered specifically for the Ford F-150 models produced between 2015 and 2020. You must verify your truck's exact model year before purchasing. Using a cover on an incompatible vehicle will result in poor fitment and potential damage. This spec ensures the cover aligns correctly with the bed rails and tailgate of your specific truck generation.
Bed Size: 5.5Ft Fleetside Bed
The cover is sized for a 5.5-foot bed with a Fleetside configuration. Fleetside beds have smooth, vertical side walls, which differs from Styleside designs. This distinction is critical for proper installation. If your truck has a different bed length or style, this cover will not fit. Always measure your bed to confirm this specification matches your vehicle.
Material: Soft vinyl
The cover is constructed from soft vinyl, making it lightweight and flexible. This material allows the cover to roll up easily for full bed access. It is less expensive than hard aluminum or fiberglass options. However, soft vinyl offers less security against theft and may be more susceptible to punctures from sharp objects compared to rigid materials.
Operation: Manual roll-up, elastic straps
You operate this cover by manually rolling it toward the cab and securing it with elastic straps. There are no hydraulic pistons or complex latching mechanisms. This simple system is reliable and easy to use. It allows for partial or full opening of the bed. The elastic straps keep the rolled cover in place while driving.
Installation: No cut or drill, included clamps
The product installs using included clamps without requiring any cutting or drilling into the truck bed. This plug-and-play approach protects your truck's finish and allows for easy removal. You should note that vehicles with a pre-installed bedliner might need modifications. This spec indicates a straightforward setup process for most standard bed configurations.
Design and Build Analysis
According to the listing, the DNA Motoring TTC-RU-015 is constructed from soft vinyl. This material choice keeps the overall weight under thirty pounds. The lightweight design allows you to roll the cover up and secure it with elastic straps without heavy lifting. The vinyl surface includes an extra coating intended to prevent scratches. You should handle the cover with care to maintain this protective layer during daily use.
The cover is designed for a 5.5-foot Fleetside bed on 2015 to 2020 Ford F-150 trucks. It features a manual roll-up operation. There are no motors or electronic components involved in the process. You simply unroll the cover and fasten the straps to lock it in place. The black finish blends with standard truck aesthetics. The model-specific design aims to ensure accurate measurements for sewing.
Installation relies on included clamps that attach without cutting or drilling into the truck bed. This plug-and-play approach simplifies setup for most users. However, the listing notes that vehicles with a bedliner may require modifications. Velcro edges seal against the truck bed to help keep water out. Rubber weather seals provide additional protection for the cargo area. The anti-curl corners are designed to maintain a neat appearance in various weather conditions.
Setup And Daily Operation Guide
The installation process relies on a plug-and-play design that requires no cutting or drilling into your truck bed. You will use the included clamps to secure the preassembled unit. This method keeps the setup straightforward. However, if your F-150 already has a bedliner installed, you may need to make modifications to ensure proper fitment. The cover is designed to fit the 5.5-foot Fleetside bed on 2015 to 2020 Ford F-150 models. You must verify your specific bed type and year before proceeding. Once mounted, you can adjust the tension to achieve a snug fit. Daily use involves rolling the soft vinyl cover up toward the cab. Elastic straps hold the rolled portion in place, keeping it out of the way when you need full bed access. The material is lightweight, weighing less than thirty pounds, which makes manual operation easy. For protection against the elements, the cover features rubber weather seals along the edges. These seals help keep the bed interior dry. The vinyl surface also includes an extra coating to resist scratches. Velcro edges run along the sides to seal against the truck bed rails. This design aims to improve aerodynamics at speed, which may help with fuel efficiency. The black finish blends with most truck exteriors. The anti-curl corners are designed to maintain a flat appearance in various weather conditions. You simply unstrap the cover, roll it back, and secure it when you are done.
Before You Buy This Cover
You should verify your truck bed type before ordering. This cover fits only the Fleetside bed. It does not fit the Styleside version. Confirm your model year is between 2015 and 2020. The listing notes that trucks with installed bedliners may require modifications. You might need to trim the bedliner edges for proper clamp placement. Keep the vinyl clean with mild soap and water. Avoid harsh chemicals that damage the coating. Store the cover securely when rolled up. This soft roll-up option sits alongside hard tri-fold and soft tri-fold styles in the broader market. It offers a lighter, more flexible alternative for those who prioritize easy access over maximum security. Choose this if you want a simple, low-profile solution for your F-150.
Check before you buy
- Confirm your Ford F-150 has a Fleetside bed.
- Check model year is between 2015 and 2020.
- Inspect for existing bedliners that may need trimming.
- Measure bed length to ensure exact five-foot fit.
The product at a glance
DNA Motoring TTC-RU-015 Soft Roll-Up
Best for: 2015-2020 Ford F-150 5.5ft Fleetside beds
- Compatible Truck
- 2015-2020 Ford F150
- Bed Size
- 5.5Ft Fleetside Bed
- Cover Style
- Soft Roll-Up
- Material
- Soft vinyl
- Installation
- No cut or drill, included clamps
- Waterproof
- Rubber weather seals
View on Amazon: DNA Motoring TTC-RU-015 Soft Roll-Up Affiliate link
This DNA Motoring soft vinyl roll-up tonneau cover fits 2015-2020 Ford F-150 models with a 5.5-foot Fleetside bed. It uses a manual roll-up design secured by elastic straps and installs without drilling or cutting. The cover weighs less than 30 pounds and includes rubber weather seals to protect the bed. It is designed for buyers who want a lightweight, easy-to-install solution for their truck bed.
Pros
- Manual roll-up operation with elastic straps
- No-drill installation using included clamps
- Weighs less than 30 pounds
- Includes rubber weather seals for protection
Cons
- Soft vinyl material offers less security than hard covers
- Manual operation requires physical effort to open and close
- May require bedliner modifications for proper fit
Good fit if
- You own a 2015-2020 Ford F-150 with a 5.5ft Fleetside bed
- You prefer a lightweight cover that is easy to install
- You want a budget-friendly soft roll-up option
Skip if
- You have a 6.5ft or 8ft bed
- You need a hard cover for maximum security
- You prefer a tri-fold design over roll-up
Verdict: DNA Motoring Soft Roll-Up 5.5ft is a practical choice for owners of 2015-2020 Ford F-150 trucks with 5.5ft Fleetside beds who want a lightweight, no-drill installation. It provides basic weather protection and easy access to the bed without the bulk of a hard cover.
Specifications side by side
| Spec | DNA Motoring TTC-RU-015 Soft Roll-Up |
|---|---|
| Compatible Truck | 2015-2020 Ford F150 |
| Bed Size | 5.5Ft Fleetside Bed |
| Cover Style | Soft Roll-Up |
| Material | Soft vinyl |
| Installation | No cut or drill, included clamps |
| Waterproof | Rubber weather seals |
| Operation | Manual roll-up, elastic straps |
| Structure | Soft |
| Bed Type | Fleetside |
| Finish | Black |
| Size | Soft Roll-Up 5.5Ft Bed |
| Color | Black |
| Model | TTC-RU-015 |
Frequently asked questions
Does the DNA Motoring TTC-RU-015 fit a 2021 Ford F-150?
No. The product data specifies compatibility only with Ford F-150 models from 2015 to 2020. You must verify your exact model year before purchasing. Using this cover on a 2021 truck will likely result in improper fitment due to design changes in later model years.
Can I use this cover on a Ford F-150 Styleside bed?
No. This cover is engineered specifically for Fleetside beds. The listing notes that it does not fit the Styleside version. You should confirm your bed type before ordering to ensure the clamps and rails align correctly with your truck's bed rails.
Is the DNA Motoring cover hard or soft?
It is a soft roll-up cover. The listing describes the structure as soft and the material as vinyl. This design allows you to roll the cover up and secure it with elastic straps, providing easy access to your bed without the bulk of a hard cover.
What color is the DNA Motoring TTC-RU-015?
The cover features a black finish. The product attributes list the color as black. This standard color helps the cover blend with most truck bed interiors and exterior trim, maintaining a clean look when the cover is rolled up or fully closed.
How much does the DNA Motoring TTC-RU-015 weigh?
The listing states the overall weight is under thirty pounds. This lightweight design is a key feature of soft vinyl covers. It allows you to roll the cover up and secure it easily without requiring heavy lifting or additional support mechanisms.
Does this cover require drilling for installation?
No. The installation relies on a plug-and-play design that requires no cutting or drilling into your truck bed. You will use included clamps to secure the preassembled unit. This method keeps the setup straightforward and preserves the integrity of your truck's bed rails.