6 Best Alternatives to the EYOUHZ Two-Stair Crew Cab Running (2026)

How alternatives compare to EYOUHZ

SOENBOO Two-Stair Running Boards Colorado Canyon Crew

The SOENBOO Two-Stair Running Boards share the same two-stair design and Crew Cab fitment as the EYOUHZ model. You get similar durability for lifted trucks, but this option weighs 44 pounds. The EYOUHZ unit does not list a specific weight, though it uses 2-millimeter carbon steel. Both offer no-drill installation and black powder coat finishes. If you prefer a known weight spec for your payload calculations, the SOENBOO data is clearer. Otherwise, the functional differences are minimal. Both step widths appear comparable for standard footwear. You choose SOENBOO if you want a verified weight figure alongside the same practical step layout.

Tyger Auto 3.5" Oval Rider Running Boards

Tyger Auto offers a 3.5-inch oval tube design rather than the EYOUHZ two-stair step. This nerf bar style is narrower at 4.61 inches wide but provides a different stepping surface. It weighs 30.3 pounds, which is lighter than the SMANOW or Comnova options. The EYOUHZ step is wider at 6 inches and supports 550 pounds. You trade some step width and potentially higher weight capacity for a sleeker profile with Tyger Auto. The oval shape may offer better grip for boots. If you prioritize a lower profile and reduced weight over maximum step surface area, this is a solid alternative for your Colorado or Canyon.

SMANOW 4" Steel Running Board

The SMANOW 4-inch Steel Running Board is a budget-friendly steel option for Crew Cab trucks. It weighs 50.9 pounds and measures 75 inches long. The EYOUHZ model is heavier due to its dual-layer two-stair construction. SMANOW offers a simpler, single-level step design. You get a high step at 4.7 inches, which aids access for lifted trucks. The finish is black steel, similar to the EYOUHZ powder coat. If you want a straightforward steel step without the complexity of stairs, this works well. It sacrifices the wider 6-inch step of the EYOUHZ for a lighter, simpler build. Choose this if you prioritize cost and simple steel construction over step width.

Tyger Auto Tyger Access Drop Step for Chevy Colorado

Tyger Auto Drop Step provides a wide 7.24-inch step, which is significantly wider than the EYOUHZ 6-inch step. It supports 500 pounds, slightly less than the EYOUHZ 550-pound capacity. The step height is 5.59 inches, offering substantial lift assistance. This model weighs 42.6 pounds. You gain a broader platform for foot placement but lose the two-stair design that aids roof access. The textured black finish matches the EYOUHZ aesthetic. If your primary need is maximum step width and budget-friendly durability, this drop step is ideal. It sacrifices the multi-level access for a single, wide, and stable platform. It is a practical choice for heavy daily use.

Tyger Auto 3.5" Rider Oval Nerf Bars

This Tyger Auto 3.5-inch Rider Oval Nerf Bar uses the same tube design as the other Tyger option. It weighs 30.3 pounds and is 80.1 inches long. The step width is 4.61 inches. It offers high weight capacity and simple installation without electronics. Compared to the EYOUHZ, you get a lighter, narrower step. The EYOUHZ provides a wider 6-inch platform and higher weight capacity. You choose this Tyger model if you prefer a classic nerf bar look and minimal weight. It lacks the two-stair functionality for roof access. It is best for drivers who want simple, durable steel protection without the added bulk of a step pad design.

Comnova 6-Inch Stainless Steel Running Boards

The Comnova 6-Inch Stainless Steel Running Board matches the EYOUHZ step width exactly. It is made of stainless steel, which offers different corrosion resistance than the EYOUHZ carbon steel. It weighs 45 pounds and is 78 inches long. The height is 3 inches. You get a slip-resistant surface and adjustable fitment. The stainless steel material is heavier than aluminum but more durable than painted steel. If you want the same 6-inch step width with a premium material, this is a strong choice. It sacrifices the two-stair design for a sleek, single-level stainless steel bar. It is ideal for those who prioritize material longevity and a wide, flat stepping surface.

Quick picks

Our 7 picks

1 Best overall

EYOUHZ Two-Stair Crew Cab Running Boards

Best for: Crew Cab trucks with lift kits

Compatible Vehicle

2015-2026 Chevy Colorado & GMC Canyon

Cab Size

Crew Cab

Material

carbon steel

Installation

no-drill bolt-on

Finish

black powder coated

Weight Capacity

550 lb

View on Amazon: EYOUHZ Two-Stair Crew Cab Running Boards Affiliate link

This EYOUHZ running board features a two-stair design with a 6-inch step width for easier entry into your 2015-2026 Chevy Colorado or GMC Canyon. Constructed from 2mm thick carbon steel, it supports up to 550 pounds per side. The black powder coat finish resists rust and corrosion. You get a bolt-on installation that takes about 20 minutes without drilling. It includes a dual-layer layout to help with lift kits.

Pros

• 6-inch step width for better footing
• 550 lb weight capacity per side
• 2mm thick carbon steel construction
• No-drill bolt-on installation
• Black powder coat rust resistance

Cons

• Limited to Crew Cab models only
• Requires checking cab dimensions for fit
• 1-year warranty period

Good fit if

• You have a lift kit or oversized tires
• You want a durable steel step
• You prefer a two-stair design

Skip if

• You drive a Double Cab truck
• You need a three-step design
• You want a longer warranty

Verdict: The EYOUHZ Two-Stair Running Board offers solid 550 lb support and a wide 6-inch step for Crew Cab owners. It is a practical solution for trucks with lift kits.

2 Best premium

SOENBOO Two-Stair Running Boards Colorado Canyon Crew

Best for: lifted trucks needing sturdy access

Compatible Vehicle

2015-2026 Chevy Colorado & GMC Canyon

Cab Size

Crew Cab

Material

carbon steel

Installation

Bolt-on, no drilling or cutting

Finish

black powder coating

Weight Capacity

550 pounds

View on Amazon: SOENBOO Two-Stair Running Boards Colorado Canyon Crew Affiliate link

The SOENBOO two-stair running boards fit 2015-2026 Chevy Colorado and GMC Canyon Crew Cab models. They feature 6-inch drop-down step pads and support 550 pounds per side. The black powder-coated carbon steel construction resists rust and corrosion. You get a bolt-on installation that takes about 20 minutes. This design helps with access for trucks with lift kits or oversized tires.

Pros

• 6-inch drop-down step pads for easier access
• 550-pound weight capacity per side
• Black powder coating for rust resistance
• Bolt-on installation without drilling

Cons

• 44-pound weight adds bulk to the sides
• Two-stair design may not suit all preferences
• Only one color option listed

Good fit if

• You have a lifted Colorado or Canyon
• You need high weight capacity for gear
• You want easy bolt-on installation

Skip if

• You prefer a sleek, low-profile look
• You need more than two step levels
• You want multiple color choices

Verdict: SOENBOO Two-Stair Running Boards offers sturdy support and easy access for lifted trucks. It suits you if you prioritize durability and simple installation over style variety.

3 Also great

Tyger Auto 3.5" Oval Rider Running Boards

Best for: drivers seeking wider step stability and durability

Compatible Vehicle

2015-2027 Chevy Colorado / GMC Canyon

Cab Size

Crew Cab

Material

Carbon steel

Step Width

3.5 in

Tube Shape

Oval

Installation

No-drill bolt-on

View on Amazon: Tyger Auto 3.5" Oval Rider Running Boards Affiliate link

These oval tube running boards feature a 3.5-inch step width for added foot stability. They are constructed from seamless carbon steel with a textured black powder E-coating to resist rust. The no-drill bolt-on design allows for installation in about 20 minutes. With a 500-pound weight capacity, they support heavy use. They fit 2015-2027 Chevy Colorado and GMC Canyon Crew Cab models.

Pros

• 3.5-inch oval step pad offers a wider surface than round tubes
• Seamless carbon steel tube construction resists corrosion
• 500 lb weight capacity for heavy loads
• No-drill bolt-on installation takes approximately 20 minutes

Cons

• 30.3-pound weight is heavier than lighter aluminum alternatives
• 11-inch ground clearance is lower than some high-clearance options
• Step width is narrower than the 6-inch models on this list

Good fit if

• You want a wider step surface for better stability
• You prefer the durability of seamless carbon steel
• You need a straightforward bolt-on installation

Skip if

• You require the maximum possible ground clearance
• You prefer the lightest possible weight for your truck
• You need a wider 6-inch step platform

Verdict: Tyger Auto 3.5" Oval Rider Running Boards provide a stable, wide step with durable steel construction. They suit drivers who prioritize foot stability and corrosion resistance over minimal weight or maximum ground clearance.

4 Best no-drill

SMANOW 4" Steel Running Board

Best for: Crew cab trucks needing a high steel step

Compatible Vehicle

2015-2026 Chevy Colorado/GMC Canyon

Cab Size

Crew Cab

Material

Carbon steel

Step Width

4 inches

Installation

No drilling required

Finish

Textured powder finish coated

View on Amazon: SMANOW 4" Steel Running Board Affiliate link

The SMANOW running board is a steel drop-step unit for 2015-2026 Chevy Colorado and GMC Canyon crew cabs. It features a 4.7-inch drop height and a 4-inch wide step with a textured powder coat finish. The 3-inch tube design provides a 450-pound weight capacity. This setup uses a no-drilling installation method. It suits you if you want durable steel construction and a wider step for easier entry.

Pros

• 4.7-inch drop height for easier access
• 450-pound maximum load capacity
• 4-inch wide step with non-slip tread
• Textured powder coat finish for durability
• No drilling required for installation

Cons

• Heavier at 50.9 pounds compared to aluminum options
• Steel material may rust if the finish is damaged
• Limited to crew cab configurations only

Good fit if

• You need a higher step for easier entry and exit
• You prefer the durability of steel over aluminum
• You want a wider 4-inch step surface

Skip if

• You drive a double cab or extended cab model
• You want to minimize added vehicle weight
• You require a step height under 4 inches

Verdict: The SMANOW 4.7 Inch Steel Running Board fits crew cab owners who prioritize a high step and heavy-duty steel build. It is a solid choice for those who do not mind the extra weight for increased durability.

5 Best drop step

Tyger Auto Tyger Access Drop Step for Chevy Colorado

Best for: budget buyers needing wide steps

Compatible Vehicle

2015-2027 Chevy Colorado/GMC Canyon

Cab Size

Crew Cab

Material

2 inch diameter carbon steel

Step Width

7.24 inches

Tube Shape

Tubular

Installation

No-drill bolt-on

View on Amazon: Tyger Auto Tyger Access Drop Step for Chevy Colorado Affiliate link

This Tyger Auto drop step is a heavy-duty side step for 2015-2027 Chevy Colorado and GMC Canyon Crew Cabs. It features a 2-inch carbon steel tube with a textured black finish. The step width is 7.24 inches, providing a solid footing area. You get a 500 lb weight capacity and easy bolt-on installation. It sits approximately 11 inches off the ground.

Pros

• 500 lb weight capacity
• 7.24-inch step width
• 2-inch carbon steel tube
• Textured black finish

Cons

• Lower ground clearance than tube options
• No step lighting included
• Heavier than aluminum alternatives

Good fit if

• You need a budget-friendly drop step
• You want a wide step for easy entry
• You prefer a low-profile design

Skip if

• You need LED step lights
• You want a narrower step
• You prefer a high-mounted tube design

Verdict: Tyger Auto Drop Step offers a wide 7.24-inch step and 500 lb capacity for budget-conscious truck owners. It is a practical choice for those who prioritize value and durability over style features.

6 Also great

Tyger Auto 3.5" Rider Oval Nerf Bars

Best for: High capacity steps without electronics

Compatible Vehicle

2015-2027 Chevy Colorado / GMC Canyon

Cab Size

Crew Cab

Width

3.5-Inch

Style

Nerf Bars

Finish

Black

Dimensions

80.1 × 4.61 × 2.95 inches

View on Amazon: Tyger Auto 3.5" Rider Oval Nerf Bars Affiliate link

The Tyger Auto 3.5" Rider Running Boards provide a stable step for your 2015-2026 Chevy Colorado or GMC Canyon Crew Cab. The oval tube design offers a wider 3.5-inch step pad compared to round tubes. These nerf bars support up to 500 lb and maintain approximately 11 inches of ground clearance. Installation is a straightforward bolt-on process that requires no drilling.

Pros

• 3.5-inch wide oval step pad for greater stability
• 500 lb weight capacity for heavy use
• Bolt-on installation with no drilling required
• Approximately 11 inches of ground clearance

Cons

• 3.5-inch step width is narrower than 6-inch alternatives
• Textured Black finish may show wear over time
• Does not include LED lighting or motorized features

Good fit if

• You want a simple, durable step without complex electronics
• You need a high weight capacity for frequent entry
• You prefer a low-profile step that preserves ground clearance

Skip if

• You require a wider step for easier climbing
• You want automatic deployment when doors open
• You need integrated LED lighting for night visibility

Verdict: Tyger Auto 3.5" Oval Tube Running Boards offer reliable stability and high weight capacity for Crew Cab owners who value simplicity. They are ideal for drivers who prioritize durability and easy installation over advanced features.

7 Best budget

Comnova 6-Inch Stainless Steel Running Boards

Best for: wide step comfort and stainless steel durability

Compatible Vehicle

2015-2026 Chevy Colorado/GMC Canyon

Cab Size

Crew Cab

Material

t304 Stainless Steel

Step Width

6 Inches

Installation

bolt-on, no drilling or cutting

Style

Side Steps

View on Amazon: Comnova 6-Inch Stainless Steel Running Boards Affiliate link

This Comnova running board features a 6-inch step width and T304 stainless steel construction for durability. It includes a slip-resistant plastic step pad and polymer stripes for traction. The unit measures 78 inches long and weighs 45 pounds. It uses a bolt-on installation method with no drilling required. The design allows for forward and backward adjustment to customize fitment for your crew cab truck.

Pros

• 6-inch wide step for maximum comfort
• T304 stainless steel heavy-duty material
• Adjustable slider design for customization
• Bolt-on installation with no drilling
• Slip-resistant plastic step pad included

Cons

• Heavier build at 45 pounds
• 3-inch height offers less ground clearance lift
• No mention of integrated lighting

Good fit if

• You want a wider 6-inch step surface
• You prefer stainless steel material over aluminum
• You need adjustable mounting positions

Skip if

• You require LED lighting for visibility
• You need a lighter weight component
• You prefer a higher step height

Verdict: Comnova 6-Inch Stainless Steel Running Boards provide a sturdy, wide step for crew cab owners who value material durability and adjustable fitment. It suits those who prioritize a broad, slip-resistant surface over integrated lighting or minimal weight.

Specifications side by side

Frequently asked questions

See also

• waveshare nano base board alternatives
• carrom board game set alternatives