GEARLAST Silverado Swing-Out Toolbox Review: Specs, Pros and Cons
As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.
This gearlast truck bed storage box review covers the Silverado Swing-Out Toolbox. It is a driver-side unit designed for 2007-2019 Chevy and GMC Silverado models with legacy or limited body styles. The box measures 35.8 inches in length, 15.8 inches in width, and 9.4 inches in height. These dimensions define its footprint in your truck bed. It mounts to the left side, leaving a three-inch gap for most bed covers. The design allows the unit to swing outward for access while maintaining a secure fit during transit.
What stands out
- Swing-out design rotates nearly 180 degrees for tailgate access
- Maintains a 3-inch gap to fit soft, hard, folding, and roll-up covers
- Includes a combination lock and key lock cover for security
- Features an organization tray and moisture-proof seal for gear protection
- Quick installation using eyelets without special tools
Who it fits
Good fit for
This toolbox suits Silverado owners who need organized, secure storage on the driver side. The swing-out hinge helps you reach tools without climbing into the bed. The three-inch clearance works with nearly all tonneau cover types, including soft and hard folds. If you carry outdoor gear or hand tools, the moisture seal and included tray keep items dry and sorted. The 75-pound capacity handles moderate loads, provided you do not overload it.
Who should skip it
Skip this option if you have a 2020-2025 Silverado, as this listing specifies the legacy body style. The passenger side is not available in this specific variation, though a separate option exists. If you require a rigid, non-moving lid, the swing-out hinge may not suit your preference. The box also lacks a remote or electronic locking system, relying instead on a manual combination and key lock. Heavy industrial use might exceed the recommended weight limits.
Verdict: This driver-side toolbox offers practical swing-out access and broad tonneau cover compatibility for older Silverado models. It is a solid choice for owners needing organized, weather-protected storage on the left side.
Key specs for this toolbox
Length: 35.8 inches
This length defines the primary storage footprint along the bed rail. You get ample space for long tools like ladders or pipes. Verify your bed size to ensure the box does not interfere with tailgate closure or existing tonneau covers. This dimension is critical for fitting legacy body styles properly.
Width: 15.8 inches
The width determines how much room the box takes up on the side rail. This profile is narrow enough to avoid blocking access to the wheel well. It allows you to maintain a 3-inch gap with most bed covers. Check that your current cover type, whether soft or hard, clears this width.
Height: 9.4 inches
This height affects the vertical clearance above your truck bed. A lower profile helps you keep your center of gravity low when driving. It also ensures the box fits under many hard or folding tonneau covers. Compare this height with your cover specs to guarantee the lid closes securely without obstruction.
Size: Driver Side
This specification confirms the unit is designed for the left side of the truck bed. You must match this to your vehicle configuration. The listing notes variations for passenger side use, so select the correct side to ensure proper mounting. Using the wrong side will prevent installation on your specific Silverado model.
Compatible Truck: Chevy Silverado
This compatibility range limits the box to 2007-2019 Chevy and GMC Silverado models. It specifies legacy or limited body styles. You must verify your exact year and body style before purchasing. This restriction ensures the mounting points align correctly. It does not fit newer 2020+ models without the specific variation option.
Design and build quality
According to the listing, this toolbox is built for the driver side of 2007-2019 Chevy and GMC Silverado models with legacy or limited body styles. The exterior finish is silver, matching the truck bed aesthetic. The unit maintains a three-inch gap from the truck bed. This clearance allows it to fit under most bed covers, including soft, hard, folding, and roll-up styles. The design resists dents and corrosion, protecting your gear from harsh environments. It also prevents the box from warping or cracking over time.
The dimensions are 35.8 inches long, 15.8 inches wide, and 9.4 inches high. This footprint provides substantial storage space for tools and outdoor equipment. The box can carry up to 75 pounds of cargo. You should reduce the weight slightly to avoid damage. An organization tray and moisture-proof seal are included. These features keep items dry and organized.
Access is managed by a swing-out mechanism. The box rotates nearly 180 degrees outward from the tailgate. This rotation allows easy access to contents while keeping the unit locked. You can rotate it back above the wheel well for maximum cargo box access. A combination lock secures the lid. The unit stays firmly in place during driving. Installation uses eyelets and requires no special tools.
Setup and everyday use
Installation requires no special tools. The listing notes that you secure the toolbox to the bed using eyelets. This method allows for quick mounting without complex hardware. You attach the unit to the driver side of your truck bed. The design maintains a three-inch gap between the box and the truck bed. This clearance is critical because it allows the toolbox to fit under almost all bed covers. You can use it with soft, hard, folding, or roll-up styles without interference. The gap helps resist dents and warping while protecting the contents from harsh environments. In daily use, the swing-out feature provides practical access. You can rotate the box outward nearly 180 degrees from the tailgate. This position allows you to lock your tools securely while keeping them visible. You can also rotate it back to the locked position above the wheel well. This maximizes access to the rest of the cargo box. The unit stays firmly attached to the vehicle at speed. For storage, the box carries up to 75 pounds of cargo. It includes a key lock cover for security. An organization tray helps sort small items. A moisture-proof seal keeps gear dry. You should reduce weight when loading heavy tools to avoid damage. The combination lock adds an extra layer of security for your equipment.
Before you buy this toolbox
Before purchasing, verify your truck’s body style. This unit fits only 2007-2019 Chevy and GMC Silverado models with legacy or limited body styles. Check the exact year and trim to ensure compatibility. The box maintains a three-inch gap from the bed, so it works with soft, hard, folding, and roll-up covers. Confirm your tonneau cover does not obstruct the 180-degree swing. You should also measure your bed rails to ensure the eyelet mounting points align properly. The listing recommends reducing weight when loading tools to prevent damage, even though it holds up to 75 pounds. Keep the moisture-proof seal clean to maintain weather protection. This toolbox is one of 1 options we compare. It suits drivers who need quick access to tools without removing a cover. It complements other storage solutions by keeping the bed organized. Ensure the driver-side placement fits your workflow. The silver finish matches standard truck aesthetics. This is a practical addition for daily use.
Check before you buy
- Verify your truck is a 2007-2019 Silverado with legacy body style.
- Confirm the three-inch gap fits your specific tonneau cover type.
- Check that eyelet mounting points align with your truck bed rails.
- Ensure the driver-side swing does not interfere with your tailgate.
The product at a glance
GEARLAST Silverado Swing-Out Toolbox
Best for: Legacy/Limited body style Silverado/Sierra owners
- Mounting Location
- Wheel well
- Capacity
- 30 L
- Lock Type
- Key lock, combination lock
- Waterproof
- Weatherproof, moisture-proof seal
- Compatible Truck
- 2007-2019 Silverado/Sierra 2500/3500HD
- Tonneau Compatible
- Yes, 3-inch gap
View on Amazon: GEARLAST Silverado Swing-Out Toolbox Affiliate link
This GEARLAST toolbox is designed for the driver side of 2007-2019 Chevy, GMC, Silverado, and Sierra 2500/3500HD trucks with Legacy or Limited body styles. It measures 35.8 inches long, 15.8 inches wide, and 9.4 inches high. The unit swings out nearly 180 degrees for tailgate access and maintains a 3-inch gap to fit most bed covers. It holds up to 75 pounds of gear and includes a key lock and moisture-proof seal.
Pros
- Swings out nearly 180 degrees for easy tailgate access
- Maintains a 3-inch gap to fit soft, hard, folding, and roll-up covers
- Includes an organization tray and moisture-proof seal
- Holds up to 75 pounds of cargo
- Combination lock for secure storage
Cons
- Limited to Legacy and Limited body styles for the specified model years
- Manufacturer recommends reducing weight to avoid damage
- Only fits the driver side of the truck bed
Good fit if
- You drive a 2007-2019 Chevy or GMC Silverado/Sierra 2500/3500HD with Legacy or Limited body styles
- You need a storage solution that swings out for easy tailgate access
- You want a toolbox that fits under various types of bed covers
Skip if
- You have a 2020-2025 model truck
- You need storage on the passenger side
- You require a box for non-Legacy body styles in the 2007-2019 range
Verdict: GEARLAST Driver Side Swing-Out Toolbox is a practical choice for owners of Legacy or Limited body style Silverados and Sierras who need secure, accessible storage. It fits well with most bed covers and offers solid protection for your tools.
Specifications side by side
| Spec | GEARLAST Silverado Swing-Out Toolbox |
|---|---|
| Mounting Location | Wheel well |
| Capacity | 30 L |
| Lock Type | Key lock, combination lock |
| Waterproof | Weatherproof, moisture-proof seal |
| Compatible Truck | 2007-2019 Silverado/Sierra 2500/3500HD |
| Tonneau Compatible | Yes, 3-inch gap |
| Dimensions | 35.8 × 15.8 × 9.4 inches |
| Size | Driver Side |
| Color | 2007-2019 Chevy GMC Silverado |
| Model | Truck Bed Storage Box |
Frequently asked questions
Does this toolbox fit all Silverado models?
No. This unit is designed specifically for 2007-2019 Chevy and GMC Silverado models. It is intended for legacy or limited body styles only. You must verify your truck's exact year and trim to ensure it matches the required body style. It will not fit newer or different body configurations.
Where does the toolbox mount on the truck?
It mounts on the driver side of the truck bed. The unit is a driver-side storage box. You secure it to the bed rail using eyelets. This placement keeps the passenger side clear and provides easy access from the driver's door.
What are the exact dimensions of the box?
The toolbox measures 35.8 inches in length, 15.8 inches in width, and 9.4 inches in height. These dimensions define its storage footprint. The length allows for long tools, while the height and width determine vertical space. You should check these measurements against your bed space.
Is the toolbox compatible with bed covers?
Yes. The listing states it fits well with most bed covers. The design maintains a specific gap to accommodate cover rails. You can install a tonneau cover without removing the toolbox. This allows you to keep your tools secure while maintaining bed cover functionality.
How is the toolbox secured to the truck?
You secure it using eyelets. The listing notes that installation requires no special tools. You attach the unit to the bed rail through these eyelets. This method allows for quick mounting. It provides a stable connection without complex hardware or drilling.
What color is the toolbox?
The exterior finish is silver. This color matches the truck bed aesthetic for many models. The silver finish helps it blend with the vehicle. It is not a painted color that may chip, but a factory-style finish.