Looking Beyond the JOYTUTUS Running Boards Wrangler JL? 6 Alternatives Worth a Look
As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.
If you are considering joytutus running boards side steps alternatives, you likely want to compare specifications before buying. The original JOYTUTUS model offers a 550 lb capacity and dual-tier anti-slip steps for Wrangler JL 4-Door models. Its reinforced steel construction and no-drill bolt-on installation make it a sturdy choice for daily use. However, you might prefer a different material, width, or vehicle fitment. Some buyers need aluminum for lighter weight or stainless steel for corrosion resistance. Others may drive a Tacoma, Ram, or Ford Ranger instead of a Jeep.
We selected these alternatives because their published specs overlap with the original JOYTUTUS product in key areas. Each option provides robust support, secure footing, and compatible mounting for specific truck models. You will find variations in step width, height, and material composition. This list covers seven distinct side steps, including options for Wrangler JK, Tacoma Double Cab, and Ram Crew Cab. Review the detailed specifications for each to find the best match for your vehicle and usage needs. These choices ensure you get the right fit without compromising on durability or ease of installation.
Our top pick: JOYTUTUS Running Boards for Wrangler JL 4-Door.
How Each Alternative Compares
Tyger Auto Trax 6.3" Dual-Tube Side Steps
The Tyger Auto Trax steps target the older Wrangler JK 4-Door models from 2007 to 2018, whereas the JOYTUTUS unit fits the newer JL generation. You get a 500 lb weight capacity, which is slightly lower than the JOYTUTUS 550 lb limit, but the dual-tube design offers solid stability. The step width is 6.3 inches, providing a broader surface than the JOYTUTUS 4.33-inch and 5.51-inch dual tiers. Installation remains a no-drill bolt-on process for both. If you drive a JK rather than a JL, this is your direct alternative. The textured black finish matches the rugged aesthetic of both options.
YZONA Jeep Wrangler JL Side Steps
YZONA offers running boards for the same 2018-2026 Wrangler JL 4-Door models as the JOYTUTUS, making them a direct competitor for fitment. Both use reinforced steel construction for durability and rely on bolt-on installation without drilling. While the JOYTUTUS specifies a 550 lb capacity and dual-tier anti-slip steps, the YZONA listing emphasizes robust steel construction and high load limits without listing exact numbers. You should check the specific weight rating if that is a critical factor for your gear. The black finish is consistent across both. Choose YZONA if you prefer their specific aesthetic or pricing, knowing the core material and fit are identical.
AutoBull 6" Aluminum Running Boards
The AutoBull running boards are designed for the Toyota Tacoma Double Cab, not the Jeep Wrangler, so fitment is entirely different. You get a 6-inch wide step made from aluminum, which differs from the JOYTUTUS reinforced steel construction. Aluminum provides inherent rust resistance, a benefit highlighted for Tacoma owners in various conditions. The weight capacity is not specified in the provided data, unlike the JOYTUTUS 550 lb rating. This option is for Tacoma owners seeking a durable, wide step. If you drive a Jeep, this product is not an alternative. The black anti-slip surface offers practical footing similar to the JOYTUTUS design.
SOENBOO 6" Running Boards Ford Ranger SuperCrew
SOENBOO steps are built for the Ford Ranger SuperCrew Cab, making them incompatible with Jeep Wrangler models. The product highlights high weight capacity and lift kit compatibility, which appeals to owners with modified vehicles. While the JOYTUTUS offers a specific 550 lb capacity, the SOENBOO listing focuses on robust construction for daily use. Both utilize bolt-on installation methods. The SOENBOO option features a two-stair design, similar to the JOYTUTUS dual-tier approach, to aid entry and exit. If you own a Ford Ranger with a lift kit, this is a suitable choice. Jeep owners should stick to Wrangler-specific models like the JOYTUTUS for proper fit.
COMNOVA 6-Inch Stainless Running Boards for Ram Crew Cab
Comnova stainless steel running boards fit the Ram 1500 Crew Cab, not the Jeep Wrangler. The material is stainless steel, which offers superior corrosion resistance compared to the black-coated reinforced steel of the JOYTUTUS. The step width is 6 inches, providing a solid surface for entry. The weight capacity is not explicitly stated, whereas the JOYTUTUS supports 550 lbs. Installation is bolt-on for both. This option is ideal for Ram owners prioritizing long-term durability against rust and weather. The stainless finish provides a distinct look compared to the rugged black of the JOYTUTUS. Jeep drivers cannot use these boards due to the different vehicle platform and mounting points.
Tyger Auto 3.5" Oval Tube
The Tyger Auto 3.5-inch oval tube is designed for the Wrangler JK 4-Door, not the JL. It features a 4.61-inch width, which is narrower than the JOYTUTUS dual-tier steps. The height is 2.95 inches, offering lower ground clearance than the JOYTUTUS setup. This model is rust-resistant and bolts on without drilling. The JOYTUTUS provides higher ground clearance and a 550 lb capacity. If you drive a JK and want a slimmer profile, this is an option. JL owners will find the fitment incorrect. The lower clearance may be a disadvantage for off-road use compared to the elevated style of the JOYTUTUS side steps.
Quick picks
Our 7 picks
JOYTUTUS Running Boards for Wrangler JL 4-Door
Best for: Wrangler JL owners needing heavy-duty support
- Compatible Vehicle
- 2018-2026 Wrangler JL 4-Door
- Material
- reinforced steel
- Step Width
- 4.33 in, 5.51 in
- Installation
- no-drill bolt-on
- Finish
- black wrinkle finish
- Weight Capacity
- 550 lb
View on Amazon: JOYTUTUS Running Boards for Wrangler JL 4-Door Affiliate link
These side steps fit 2018-2026 Jeep Wrangler JL 4-Door models. They use reinforced steel and support 550 lbs per step. The dual-tier design offers 4.33-inch and 5.51-inch steps for grip. Installation bolts into factory holes without drilling. The black finish resists rust and corrosion. They add rugged style while keeping ground clearance intact.
Pros
- 550 lb weight capacity per step
- Dual-tier anti-slip steps (4.33" and 5.51")
- Bolt-on installation with no drilling required
- Reinforced steel construction with rust-resistant black finish
Cons
- Heavier build at 50 pounds
- Installation tools not included
- Specific to 4-Door Wrangler JL models only
Good fit if
- You need a high weight capacity for heavy gear
- You want a direct bolt-on fit without drilling
- You prefer a dual-tier step design for better grip
Skip if
- You drive a 2-Door Wrangler
- You need installation tools included in the box
- You prefer a lighter weight accessory
Verdict: JOYTUTUS Running Boards for 2018-2026 Wrangler JL fits Wrangler JL owners who prioritize heavy-duty support and precise bolt-on installation. The dual-tier steps provide secure footing for daily use and off-road adventures.
Tyger Auto Trax 6.3" Dual-Tube Side Steps
Best for: Jeep Wrangler JK 4-Door owners needing high load capacity
- Compatible Vehicle
- 2007-2018 Jeep Wrangler JK 4-Door
- Cab Size
- 4-Door
- Material
- carbon steel
- Step Width
- 6.3 inches
- Tube Shape
- dual-tubular
- Installation
- no-drill bolt-on
View on Amazon: Tyger Auto Trax 6.3" Dual-Tube Side Steps Affiliate link
Tyger Auto Trax side steps feature a dual-tubular carbon steel design for the 2007-2018 Jeep Wrangler JK 4-Door. They offer a 500 lb weight capacity and a 6.3-inch step width. The textured black powder E-coating provides rust resistance. Installation is a no-drill bolt-on process. These steps provide steady support for entering and exiting your vehicle.
Pros
- 500 lb weight capacity
- 6.3-inch step width
- Dual-tubular carbon steel construction
- No-drill bolt-on installation
- Textured black powder E-coating finish
Cons
- Not compatible with Jeep Wrangler JL models
- Limited to 4-Door cab size
- Standard 3-year warranty against defects
Good fit if
- You own a 2007-2018 Jeep Wrangler JK 4-Door
- You need a high weight capacity for passengers
- You prefer a dual-tubular step design
Skip if
- You drive a Jeep Wrangler JL model
- You require a 2-door vehicle fitment
- You need a step wider than 6.3 inches
Verdict: Tyger Auto Trax Dual-Tube Side Steps provide a robust 500 lb capacity and secure no-drill installation for 2007-2018 Jeep Wrangler JK 4-Door owners. The dual-tubular design offers stability for frequent entry and exit.
YZONA Jeep Wrangler JL Side Steps
Best for: Jeep Wrangler JL 4-door owners needing high load capacity
- Compatible Vehicle
- 2018-2027 Jeep Wrangler JL
- Cab Size
- Unlimited 4 Doors
- Material
- tubular steel
- Tube Shape
- tubular
- Installation
- No cutting or drilling
- Finish
- textured powder coating
View on Amazon: YZONA Jeep Wrangler JL Side Steps Affiliate link
YZONA running boards fit 2018-2026 Jeep Wrangler JL 4-door models, including 4XE variants. They are built from heavy-duty 2.0-inch tubular steel with a dual-beam system. The textured powder coat finish resists rust and corrosion. You get a 550-pound weight capacity for safe use. Installation requires no drilling, using existing vehicle bolts. The 5-inch drop height aids entry and exit.
Pros
- 550-pound weight capacity
- Heavy-duty 2.0-inch tubular steel construction
- No drilling required for installation
- Textured powder coat for rust resistance
Cons
- Installation bolts are not included
- Limited to 4-door Wrangler JL models
- Only available in black finish
Good fit if
- You own a 2018-2026 Jeep Wrangler JL 4-door
- You need a high weight capacity for gear or passengers
- You want a durable steel build with rust protection
Skip if
- You drive a 2-door Wrangler or a Gladiator
- You prefer aluminum or composite materials over steel
- You need a finish other than black
Verdict: YZONA Running Boards for 2018-2026 Jeep Wrangler JL offers robust steel construction and a high load limit. It suits owners of the 4-door JL who prioritize durability and easy bolt-on installation.
AutoBull 6" Aluminum Running Boards
Best for: 2005-2023 Toyota Tacoma Double Cab owners
- Compatible Vehicle
- 2005-2023 Toyota Tacoma
- Material
- Aluminum
- Step Width
- 6 inches
- Finish
- Black powder coated
- Cab Size
- Double Cab
- Style
- Side Steps
View on Amazon: AutoBull 6" Aluminum Running Boards Affiliate link
The AutoBull running board is built from rust-resistant aluminum with a black powder-coated finish. It offers a 6-inch wide step surface and measures 82.6 inches long. The design includes ABS plastic corner covers and a honeycomb anti-slip center. This side step fits 2005-2023 Toyota Tacoma Double Cab models. It provides a sturdy mounting point for easier entry and exit.
Pros
- Constructed from rust-resistant aluminum for durability
- 6-inch wide stepping area for stability
- Includes ABS plastic corner covers for edge protection
- Black powder coated finish resists weather wear
Cons
- Does not fit 2024 Tacoma models
- Excluded from Access Cab with narrow rear doors
- Weighs 34.2 pounds per pair
Good fit if
- You own a 2005-2023 Toyota Tacoma Double Cab
- You prefer aluminum construction over steel
- You need a 6-inch wide step surface
Skip if
- You drive a 2024 Tacoma
- You have an Access Cab with narrow rear doors
- You require a 4-inch height option
Verdict: The AutoBull 6" Aluminum Tacoma Running Board fits 2005-2023 Toyota Tacoma Double Cab owners who want a durable, wide step. It is a practical upgrade for daily drivers seeking rust resistance.
SOENBOO 6" Running Boards Ford Ranger SuperCrew
Best for: Ford Ranger Supercrew Cab owners with lift kits
- Compatible Vehicle
- 2019-2026 Ford Ranger
- Cab Size
- SuperCrew Cab
- Material
- carbon steel
- Installation
- no-drill bolt-on
- Finish
- black powder coated
- Weight Capacity
- 550 lb
View on Amazon: SOENBOO 6" Running Boards Ford Ranger SuperCrew Affiliate link
These side steps fit 2019-2026 Ford Ranger Supercrew Cabs. They use 2mm carbon steel with a black powder coating for rust resistance. Each side supports 550 pounds. The 6-inch drop-down pads help with lift kits and large tires. Installation is bolt-on with no drilling. You get a dual-layer design for better roof access. This is a durable option for your Ranger.
Pros
- 2mm heavy-duty carbon steel construction
- 550-pound weight capacity per side
- 6-inch drop-down step pads for lift kits
- Black powder coating for corrosion resistance
- Bolt-on installation with no drilling required
Cons
- Limited to Supercrew Cab models only
- Only includes a 1-year warranty
- Two-stair design may not suit all preferences
Good fit if
- You drive a 2019-2026 Ford Ranger Supercrew Cab
- You have a lifted truck with large tires
- You want a durable steel step with high weight capacity
Skip if
- You drive a different cab size like the XLT or Lariat without Supercrew
- You need a step for a truck other than the Ford Ranger
- You prefer aluminum construction for lighter weight
Verdict: SOENBOO Ford Ranger Supercrew Side Steps are a robust choice for Ranger owners needing high weight capacity and lift kit compatibility. They offer a secure, bolt-on solution for daily use.
COMNOVA 6-Inch Stainless Running Boards for Ram Crew Cab
Best for: Ram 1500 Crew Cab owners
- Compatible Vehicle
- 2009-2026 Dodge Ram 1500 2500 3500
- Cab Size
- Crew Cab
- Material
- Stainless steel
- Step Width
- 6 in
- Installation
- Direct bolt-on, no drilling
- Weight Capacity
- 500 lb
View on Amazon: COMNOVA 6-Inch Stainless Running Boards for Ram Crew Cab Affiliate link
These running boards feature a 6-inch wide stainless steel step designed for Dodge Ram 1500 Crew Cab models from 2009 to 2018. The unit includes anti-slip plastic steps and mounts via direct bolt-on hardware without drilling. It supports up to 500 pounds per bar and offers a 2-inch height rise. This setup provides a secure footing for entering your truck while resisting corrosion and UV radiation.
Pros
- Constructed from high-grade stainless steel
- 6-inch wide step for secure footing
- Supports 500 pounds per bar
- Direct bolt-on installation without drilling
- Patented slider design for customization
Cons
- Limited to Crew Cab configurations
- Not compatible with Quad Cab models
- Excludes 2019-2025 New Body Style Ram 1500
Good fit if
- You own a 2009-2018 Dodge Ram 1500 Crew Cab
- You prefer stainless steel over aluminum or plastic
- You want a 6-inch step width for easier access
Skip if
- You drive a Ram 1500 New Body Style
- You have a Quad Cab or Regular Cab
- You need compatibility with 2019-2025 models
Verdict: Comnova Stainless Steel Running Boards offer durable stainless steel construction and a wide 6-inch step for Ram 1500 Crew Cab owners who need a sturdy, corrosion-resistant entry aid.
Tyger Auto 3.5" Oval Tube
Best for: Jeep Wrangler JK owners wanting a wider step
- Compatible Vehicle
- 2007-2018 Jeep Wrangler JK 4-Door
- Material
- Carbon steel
- Step Width
- 3.5 in
- Tube Shape
- Oval
- Installation
- Bolt-on, no drilling required
- Finish
- Textured powder E-coating
View on Amazon: Tyger Auto 3.5" Oval Tube Affiliate link
The Tyger Auto 3.5-inch oval tube running boards provide a wider step surface for Jeep Wrangler JK 4-Door models. The seamless carbon steel construction features a textured powder E-coating to resist rust and corrosion. With a 500 lb weight capacity and a ground clearance of approximately 15 inches, this side step offers stable footing. The oval design increases the step area compared to round tubes, enhancing safety in wet conditions.
Pros
- 3.5-inch oval step pad offers a broader surface than round tubes
- Seamless carbon steel tubes resist rust and corrosion
- 500 lb weight capacity supports heavy loads
- Bolt-on installation requires no drilling
- 3-year warranty against manufacturing defects
Cons
- Not compatible with Jeep Wrangler JL models
- Requires removal of factory rock rails for installation
- Ground clearance is lower than 6-inch alternatives
Good fit if
- You drive a 2007-2018 Jeep Wrangler JK 4-Door
- You want a wider step surface for better stability
- You prefer bolt-on installation without drilling
Skip if
- You own a Jeep Wrangler JL model
- You want to keep your factory rock rails intact
- You need higher ground clearance than 15 inches
Verdict: Tyger Auto 3.5" Oval Tube Running Boards suit JK owners needing a wider, rust-resistant step that bolts on quickly. The lower ground clearance and specific fitment limit its appeal for JL drivers or those seeking maximum lift.
Specifications side by side
| Spec | JOYTUTUS Running Boards for Wrangler JL 4-Door | Tyger Auto Trax 6.3" Dual-Tube Side Steps | YZONA Jeep Wrangler JL Side Steps | AutoBull 6" Aluminum Running Boards | SOENBOO 6" Running Boards Ford Ranger SuperCrew | COMNOVA 6-Inch Stainless Running Boards for Ram Crew Cab | Tyger Auto 3.5" Oval Tube |
|---|---|---|---|---|---|---|---|
| Compatible Vehicle | 2018-2026 Wrangler JL 4-Door | 2007-2018 Jeep Wrangler JK 4-Door | 2018-2027 Jeep Wrangler JL | 2005-2023 Toyota Tacoma | 2019-2026 Ford Ranger | 2009-2026 Dodge Ram 1500 2500 3500 | 2007-2018 Jeep Wrangler JK 4-Door |
| Cab Size | not stated | 4-Door | Unlimited 4 Doors | not stated | SuperCrew Cab | Crew Cab | not stated |
| Material | reinforced steel | carbon steel | tubular steel | Aluminum | carbon steel | Stainless steel | Carbon steel |
| Step Width | 4.33 in, 5.51 in | 6.3 inches | not stated | 6 inches | not stated | 6 in | 3.5 in |
| Tube Shape | not stated | dual-tubular | tubular | not stated | not stated | not stated | Oval |
| Installation | no-drill bolt-on | no-drill bolt-on | No cutting or drilling | not stated | no-drill bolt-on | Direct bolt-on, no drilling | Bolt-on, no drilling required |
| Finish | black wrinkle finish | textured black powder E-coating | textured powder coating | Black powder coated | black powder coated | not stated | Textured powder E-coating |
| Weight Capacity | 550 lb | 500 lb | 550 pounds | not stated | 550 lb | 500 lb | 500 lb |
| Compatible Truck | Jeep Wrangler | Jeep Wrangler | Jeep Wrangler | Toyota Tacoma | Ford Ranger | Dodge Ram 1500, Ram | Jeep Wrangler |
| Width | not stated | 6.3 inches | not stated | 6 inches | not stated | 6-Inch | 3.5-Inch |
| Style | Side Steps | Side Steps | Side Steps | Side Steps | Side Steps | Side Steps | Nerf Bars |
| Weight | 50 pounds | 47.2 pounds | not stated | 34.2 pounds | not stated | 47.6 pounds | 32.8 pounds |
| Dimensions | not stated | 70.5 × 6.3 × 2.36 inches | not stated | 82.6 × 6 × 2.1 inches | not stated | 82 × 6 × 2 inches | 74.3 × 4.61 × 2.95 inches |
| Size | 2018-2026 Wrangler JL 4 Doors | Wrangler JKU 4Door | For 18-26 Wrangler JL | Tacoma 05-23 Crew | Ranger Crew | 09-18 Ram Crew Cab | Wrangler JKU 4Door |
| Color | Black | Textured Black | Black | Alu-diamond anti-slip black | Two Stair Design | Stainless Steel | Black |
| Model | A3302-00306-BK | TG-TX7J27608 | Compatible with Jeep Wrangler JL JLU | ABRB-1001 | Ranger Running Board Crew Cab | 20375H6-SS | TG-SS2J64761 |
Another guide worth a look: connelly wakesurf board alternatives.
Frequently asked questions
Do these alternatives fit the Jeep Wrangler JL 4-door?
Yes, several options are designed for this model. The JOYTUTUS side steps fit Wrangler JL 4-Door models from 2018 to 2026. The YZONA steps also list compatibility with the 2018 to 2026 Wrangler JL. The Tyger Auto Trax steps are for the older Wrangler JK 4-Door, so they will not fit your JL.
What is the weight capacity of these side steps?
Most alternatives offer strong support for daily use. The Tyger Auto Trax steps provide a 500 lb capacity. The JOYTUTUS model supports up to 550 lbs. The YZONA steps are noted for high load limits, though a specific number is not listed. These capacities ensure stability when entering or exiting your vehicle.
Are aluminum running boards rust resistant?
Yes, aluminum is naturally rust resistant. The AutoBull 6-inch aluminum running boards are made from this material. They are described as durable and practical for daily drivers who want to avoid corrosion. This makes them a suitable choice if you drive in wet or salty conditions.
Do these steps require drilling for installation?
No, most alternatives use a no-drill bolt-on method. The JOYTUTUS steps feature precise bolt-on installation without drilling. The Tyger Auto Trax steps also offer secure no-drill installation. This approach helps preserve your vehicle’s original structure and simplifies the mounting process for you.
Which running boards work with lifted Jeep Wranglers?
The SOENBOO steps are specifically noted for lift kit compatibility. They are designed for Ford Ranger Supercrew Cab owners with lifted vehicles. For Jeeps, the JOYTUTUS dual-tier steps provide secure footing for off-road adventures. You should check the specific fitment for your lift height to ensure proper clearance.
How wide are the step pads on these boards?
Width varies by model. The AutoBull and Comnova steps both offer a 6-inch wide step. The Tyger Auto Trax steps are 6.3 inches wide. The Tyger Auto 3.5-inch oval tube has a width of 4.61 inches. Wider steps generally provide more secure footing for your boots.
Are there stainless steel options available?
Yes, the Comnova Autopart steps are made from stainless steel. They are designed for Ram 1500 Crew Cab models from 2009 to 2018. This material offers durable, corrosion-resistant construction. You get a wide 6-inch step that remains sturdy over time without needing special maintenance.