OEDRO Soft Tri-Fold Jeep Gladiator Review (2026): A Spec-Based Look
As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.
This oedro soft tri fold tonneau cover review focuses on a cover built for the 2020-2026 Jeep Gladiator 5 ft bed. It features a soft tri-fold design that folds back in three sections. The material is double-layer PVC, which offers UV protection and tensile strength. It weighs 26.2 pounds and measures 63 inches in length. Installation requires no drilling for most setups. This spec-based look helps you decide if this fit matches your truck bed dimensions and security needs.
What stands out
- Double-layer PVC material for UV and tensile resistance
- Soft tri-fold style folds into three sections
- Fits 2020-2026 Jeep Gladiator 5 ft (60.3 in) beds
- No drilling required for standard under-the-bedrail liners
- Weighs 26.2 pounds with pre-assembled powder-coated rails
Who it fits
Good fit for
You should consider this cover if you drive a 2020-2026 Jeep Gladiator with a 5 ft Fleetside bed. The soft tri-fold design allows you to access your cargo in sections without removing the entire cover. The double-layer PVC provides decent protection against dust and snow. If you want a lightweight option that installs quickly without modifying your bedliner, this spec sheet supports that use case. The included waterproof strips add extra seal integrity.
Who should skip it
Skip this option if your Jeep Gladiator has a 6 ft bed. This cover is specifically sized for the 5 ft (60.3 in) configuration. It will not fit longer beds. You should also avoid it if you need a hard cover for maximum impact resistance. The soft PVC material offers less security against forced entry compared to aluminum or fiberglass alternatives. Check your bedliner type, as over-the-bedrail liners may require small cuts for clamp installation.
Verdict: This cover is a practical, lightweight choice for Jeep Gladiator owners with 5 ft beds who prioritize easy installation and flexible cargo access.
Key specs explained for this cover
Bed Size: 5 ft (60.3 in)
This cover is engineered specifically for the 60.3-inch Fleetside bed found on 2020 through 2026 Jeep Gladiator models. You must verify your bed length before purchasing, as a mismatch will prevent proper installation and secure fitment. This specification ensures the cover aligns correctly with the truck's rail system, providing a snug seal that protects your cargo from the elements and theft.
Material: Double layer PVC
The cover uses a two-layer PVC construction designed to resist ultraviolet damage and maintain tensile strength over time. This material choice offers durability against sun exposure and weather changes without adding excessive weight. When shopping for tonneau covers, double-layer PVC is a practical choice for buyers seeking a balance between flexibility for folding and resilience against daily wear and tear.
Cover Style: Soft Tri-fold
This design folds the cover into three distinct sections, allowing you to access the rear portion of your truck bed while keeping the front secured. The soft material conforms to the bed rails for a streamlined look. This style is ideal for drivers who need frequent access to their cargo area but want the convenience of a quick, tool-free fold-back mechanism compared to hard covers.
Installation: No Drilling
The cover attaches using clamps that secure to the bed rails without requiring permanent modifications to your vehicle. You can install it using the included instructions, making it a reversible upgrade for your Jeep Gladiator. This feature is valuable for buyers who want a secure fit without voiding warranties or damaging their truck's original finish, ensuring a clean and professional appearance.
Design and Build Details
The listing describes the cover as a soft tri-fold unit constructed from double-layer PVC. This material choice targets UV resistance and tensile strength, aiming to withstand sun exposure and daily wear. The structure relies on pre-assembled powder-coated rails and aluminum clamps for stability. You get a black finish that matches typical truck aesthetics. The design folds into three sections, allowing you to access the bed while leaving the rear window clear. This layout suits drivers who need frequent cargo access without removing the entire cover.
According to the listing, the cover weighs 26.2 pounds. Its dimensions are 63 inches in length, 24.4 inches in width, and 4.33 inches in height. The low profile helps maintain a streamlined look on the Jeep Gladiator. Installation requires no drilling in most cases, relying on clamps that attach to the bed rails. You must remove cargo racks before fitting the cover. If your truck has an over-the-bedrail bedliner, you may need to cut small holes for the clamps. Under-the-bedrail liners require no modification. The tailgate lock secures the bed, turning it into a dust-proof and snow-proof storage space. Waterproof strips are included to enhance weather protection. This build focuses on practical utility and straightforward mounting for the 5 ft bed model.
Installation and Daily Use Guide
Setting up this cover requires no special tools. The package includes pre-assembled powder-coated rails and aluminum clamps. You follow the included manual to secure the unit. Most installations do not require drilling into the truck bed. However, if your Gladiator has an over-the-bedrail bedliner, you must cut small holes to attach the clamps properly. Pickups with under-the-bedrail bedliners need no modification. You must remove any cargo racks before beginning the process. Once installed, the cover folds back in three sections. This tri-fold style allows you to access the rear portion of your 60.3-inch bed while keeping the front covered. The tailgate lock integrates with the cover to secure your cargo. This setup turns your truck bed into a secure space that is dust-proof and snow-proof. The double-layer PVC material provides day and night security. You can rely on the included waterproof strips to help keep moisture out. The cover weighs 26.2 pounds and measures 63 inches in length. Its width is 24.4 inches with a height of 4.33 inches. These dimensions fit the standard Fleetside bed on 2020 through 2026 Jeep Gladiator models. The black finish blends with the truck’s exterior. Daily use involves folding the cover back when you need to load longer items. You simply unfold it to restore protection. The aluminum clamps hold the structure firmly in place during driving. This design balances security with easy access to your gear.
Before You Buy This Cover
Before adding this oEdRo cover to your Jeep Gladiator, verify your bed liner type. If you have an over-the-bedrail liner, you must cut small holes for the clamps. Under-the-bedrail liners require no modification. Remove any cargo racks before starting installation. The cover weighs 26.2 pounds, so handle it with care during setup. You should also check the height options. This listing offers variations from 4.33 to 6.1 inches. Choose the profile that fits your aesthetic and functional needs. Keep the waterproof strips handy for installation to ensure proper sealing. This soft tri-fold option sits alongside roll-up and hinged covers in our 1 product guide. It suits drivers who prioritize UV resistance and easy folding access. Double-layer PVC provides durability, but you must maintain it to preserve tensile strength. Regular cleaning prevents dirt buildup in the folds. Ensure your tailgate locks securely for full security. This cover integrates well with standard Gladiator accessories, provided you account for the clamp requirements.
Check before you buy
- Confirm your bed liner type for clamp installation needs.
- Remove cargo racks before beginning the setup process.
- Select the correct height variation for your preference.
- Check that your tailgate locks for full security.
The product at a glance
oEdRo Soft Tri-Fold Jeep Gladiator 5 ft Bed Cover
Best for: Jeep Gladiator owners wanting easy folding access
- Compatible Truck
- 2020-2026 Jeep Gladiator
- Bed Size
- 5 ft
- Cover Style
- Soft Tri-Fold
- Material
- Double layer PVC
- Installation
- No drilling in most cases
- Bed Type
- Fleetside
View on Amazon: oEdRo Soft Tri-Fold Jeep Gladiator 5 ft Bed Cover Affiliate link
This is a soft tri-fold tonneau cover designed for the 2020-2026 Jeep Gladiator with a 5 ft bed. It uses double layer PVC material for durability and UV protection. The cover weighs 26.2 pounds and folds compactly. It installs without drilling, relying on aluminum clamps. Tailgate locking provides security against dust and snow. You get a practical solution for bed protection.
Pros
- Fits 2020-2026 Jeep Gladiator 5 ft beds
- Double layer PVC material resists UV damage
- No drilling required for installation
- Tailgate locks for security and weather protection
Cons
- Soft PVC material offers less security than hard covers
- Requires cutting small holes for over-the-bedrail bedliners
- Cargo racks must be removed before installation
Good fit if
- You own a 2020-2026 Jeep Gladiator with a 5 ft bed
- You prefer a lightweight cover that folds easily
- You want a no-drill installation process
Skip if
- You need a hard cover for maximum theft deterrence
- You have an under-the-bedrail bedliner and want zero modification
- You require a cover that fits over cargo racks
Verdict: OEDRO Soft Tri-Fold 5ft Jeep Gladiator is a solid choice for Gladiator owners needing a lightweight, easy-to-install cover. It suits those who prioritize weather protection and simple folding over hard-shell security.
Specifications side by side
| Spec | oEdRo Soft Tri-Fold Jeep Gladiator 5 ft Bed Cover |
|---|---|
| Compatible Truck | 2020-2026 Jeep Gladiator |
| Bed Size | 5 ft |
| Cover Style | Soft Tri-Fold |
| Material | Double layer PVC |
| Installation | No drilling in most cases |
| Structure | Soft |
| Bed Type | Fleetside |
| Size | 5ft Bed |
| Dimensions | 63 × 24.4 × 4.33 inches |
| Weight | 26.2 pounds |
| Color | Black |
| Model | MAOA-0037 |
Frequently asked questions
Does the oEdRo soft tri-fold cover fit a 5 ft bed Jeep Gladiator?
Yes, this cover is engineered specifically for the 5 ft (60.3 inch) Fleetside bed found on 2020 through 2026 Jeep Gladiator models. The manufacturer lists the compatible bed size as 5 ft. You must verify your truck bed length before purchasing to ensure a proper fit, as a mismatch will prevent installation.
How heavy is the oEdRo soft tri-fold tonneau cover?
The cover weighs 26.2 pounds. This lightweight design makes it easy for one person to handle and install without assistance. The compact folded dimensions of 24.4 inches by 4.33 inches allow it to stow neatly at the front of the bed when fully open.
What material is the oEdRo soft tri-fold cover made from?
The cover is constructed from double-layer PVC material. This choice targets UV resistance and tensile strength to withstand sun exposure and daily wear. The soft structure folds in three sections, providing a balance between weather protection and easy access to your cargo area.
Is the oEdRo cover color black?
Yes, the listed color for this model is black. The black finish helps the cover blend with the truck bed rails and tailgate. The specific model number for this black tri-fold unit is MAOA-0037, which you can use to verify the exact product listing.
Does the oEdRo cover require drilling for installation?
Most installations do not require drilling into the truck bed. The package includes pre-assembled powder-coated rails and aluminum clamps for secure attachment. You follow the included manual to position the clamps, ensuring a stable fit without permanent modifications to your vehicle's bed structure.
What is the folded size of the oEdRo tri-fold cover?
When folded, the cover measures 24.4 inches in width and 4.33 inches in height. The total length is 63 inches when fully extended, but it collapses significantly for storage. This compact profile allows you to maintain full visibility out of the rear window when the bed is open.