RealTruck BAKFlip G2 6ft Bed Review (2026): A Spec-Based Look
As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.
This realtruck bakflip g2 6ft bed review focuses on the BAKFlip G2 hard folding cover for the 2015-2020 Ford F-150 6' 7" bed. It is defined by its quad-fold hard structure and glossy aluminum panels. The cover weighs 71 pounds and stands 9 inches tall when closed. These specs determine how it fits your truck and how much cargo space it consumes. We explain what these numbers mean for your daily use, from security to bed access, without any personal testing or subjective opinions.
What stands out
- Quad-fold hard structure made of durable aluminum panels
- Automatic latching system with quick-release cables on both sides
- Low-profile 9-inch height allows full bed access while closed
- Prop rods hold the cover upright when flipped up
Who it fits
Good fit for
You should choose this cover if you need strong security and full bed access. The hard aluminum panels and automatic latching system protect your gear better than vinyl options. The quad-fold design lets you access the entire bed while keeping the cover on the truck. If you often load long items or need to reach the third brake light without removing the cover, this 6' 7" bed fit is a practical solution for your Ford F-150.
Who should skip it
Skip this option if you prefer a soft roll-up cover for maximum vertical clearance. This hard cover takes up about 9 inches of bed space when folded. It also weighs 71 pounds, which is heavier than many soft alternatives. If you frequently need to haul tall items that require every inch of height, or if you want a lighter cover that is easier to handle alone, another style might serve your needs better.
Verdict: The BAKFlip G2 offers solid security and full bed access for your 6' 7" Ford F-150. Its hard aluminum build and low profile make it a reliable choice for daily drivers who value protection.
Key specs explained
Structure: Hard
The panels are rigid rather than flexible vinyl. This offers better protection against heavy items placed on top and resists dents. You get a solid barrier against theft and weather. Hard covers often look more integrated with the truck bed. Compare this to soft roll-up covers if you prioritize lightweight flexibility over impact resistance.
Cover Style: Quad-Fold
The cover folds into four distinct sections. This allows you to access the rear portion of the bed while keeping the front covered. It is a middle ground between full access and partial coverage. Quad-fold designs are common for mid-size beds. Check if the folded stack length fits your needs compared to tri-fold options.
Weight: 71 pounds
This is the total mass of the cover assembly. A heavier cover often indicates durable aluminum construction. You need to ensure your tailgate can support this weight when closed. Heavier units may feel more substantial and secure. Compare this to lighter vinyl covers if you plan to remove the cover frequently.
Height: 9 inches
The folded stack of panels rises nine inches above the bed rails. This profile is relatively low for a hard cover. You can still use a bed rack or cap with this stack height. Ensure the folded height does not interfere with your cab or rack system. Compare this to taller stacks that might block third brake lights.
Color: Glossy Finish
The aluminum panels have a shiny, reflective surface. This finish matches the look of many factory truck beds. It resists dirt and water spotting better than matte surfaces. You can wipe it clean easily with a damp cloth. Compare this to textured or matte finishes if you prefer a stealthier appearance.
Design and build details
The listing describes this cover as a hard folding unit with a quad-fold layout. You get rigid aluminum panels rather than flexible vinyl. This structure provides a solid barrier against weather and impacts. The glossy finish adds a clean look that matches many truck beds. According to the listing, the panels are durable and resist dents better than soft materials. This means you can place items on top without worrying about damage.
The cover stands 9 inches tall and weighs 71 pounds. This height allows you to drive with the cover fully closed or folded up. It does not block the third brake light. The weight suggests a sturdy build that stays in place during travel. You will need to handle the panels carefully when folding them due to the mass.
Controls include an automatic latching system and quick-release cables. You can operate the cover from either side of the truck bed. Prop rods hold the cover upright when open. These rods stow away securely when you close the cover. This design lets you access the bed quickly. You can flip the cover up or fold it back. The layout supports full bed access while maintaining security. The hard construction and simple controls make it practical for daily use.
Setup And Daily Operation
The BAKFlip G2 uses a quad-fold hard structure that defines how you access your cargo. The cover folds into four distinct sections, allowing you to adjust the open position. You can drive with the panels fully closed, folded back partially, or flipped entirely upright. This flexibility means you do not need to remove the cover for partial bed access. The low-profile design ensures the third brake light remains visible in all positions, which is a practical safety feature for daily driving. Setup involves installing the unit on the 2015-2020 Ford F-150 with a 6' 7" bed. The cover weighs 71 pounds, so you will need assistance for placement. Once installed, the automatic latching system secures the panels. You can operate the cover from either side of the truck bed using quick-release cables located under the panels. This dual-side access adds convenience if you park in tight spaces. When you fold the cover back, prop rods hold the panels upright. These rods stow securely when you close the cover, preventing loose parts from shifting while you drive. The glossy finish on the aluminum panels resists dirt and maintains a clean appearance. The 9-inch width of each panel contributes to a snug fit across the bed rails. You get 100% bed access when the cover is fully open, as the panels stack neatly at the front. The hard construction provides a solid barrier against weather and potential theft. You do not need to worry about vinyl flapping in the wind or tearing. The rigid aluminum offers better protection for items stored underneath. This setup is ideal for users who want security without sacrificing the ability to load large items quickly.
Check Fit And Maintenance
Before purchasing this RealTruck BAKFlip G2, verify your exact bed dimensions. The listing specifies a 6' 7" bed length of 78.9 inches. Your F-150 must fall within the 2015-2020 model range. Measure your bed rail to rail width to ensure the 9-inch panel width aligns correctly. You must also confirm your truck has a third brake light that remains visible when the cover is flipped up. The cover relies on quick-release cables under the panels for side access. You should inspect these cables periodically for wear. Keep the aluminum panels clean to maintain the glossy finish. This hard folding option sits alongside soft vinyl and rolling covers in the market. It offers superior security and rigidity compared to vinyl, while providing easier access than full rolling units. It suits drivers who need frequent bed access without removing the cover entirely.
Check before you buy
- Confirm your Ford F-150 is a 2015-2020 model year.
- Measure your bed length to ensure it is exactly 6' 7".
- Verify the third brake light remains visible when panels are flipped up.
- Check for quick-release cable access points under the side panels.
The product at a glance
RealTruck BAKFlip G2 6ft Bed
Best for: 6' 7" Ford F-150 beds needing hard cover security
- Compatible Truck
- 2015-2020 Ford F-150
- Bed Size
- 6' 7"
- Cover Style
- Hard Folding
- Material
- Aluminum
- Lock Type
- Automatic Slam Latches
- Installation
- No-Drill
View on Amazon: RealTruck BAKFlip G2 6ft Bed Affiliate link
The RealTruck BAKFlip G2 is a hard folding tonneau cover designed for the 2015-2020 Ford F-150 with a 6' 7" bed. It features durable aluminum panels and a low-profile 9-inch width. The cover weighs 71 pounds and folds into four sections. It includes an automatic latching system and prop rods for secure storage. This cover offers full bed access while maintaining a sleek, glossy finish.
Pros
- Constructed from durable aluminum panels for enhanced security
- Fits 2015-2020 Ford F-150 6' 7" bed
- Low-profile 9-inch width allows closed driving
- Prop rods hold cover upright when open
- Operational from either side with quick-release cables
Cons
- Heavy 71-pound build requires careful handling
- Quad-fold design limits partial opening flexibility
- No mention of integrated locking mechanism details
Good fit if
- You need a hard cover for a 6' 7" Ford F-150
- You want full bed access with the cover folded
- You prefer a low-profile aesthetic for your truck
Skip if
- You have a 5' 7" or 8' 2" bed
- You need a cover lighter than 71 pounds
- You want a soft rolling tonneau cover
Verdict: RealTruck BAKFlip G2 6ft 7in is a secure, hard folding cover for 2015-2020 Ford F-150 owners with 6' 7" beds. It suits those prioritizing aluminum durability and full bed access over lightweight portability.
Specifications side by side
| Spec | RealTruck BAKFlip G2 6ft Bed |
|---|---|
| Compatible Truck | 2015-2020 Ford F-150 |
| Bed Size | 6' 7" |
| Cover Style | Hard Folding |
| Material | Aluminum |
| Lock Type | Automatic Slam Latches |
| Installation | No-Drill |
| Structure | Hard |
| Size | 6' 7" Bed |
| Dimensions | 81 × 9 × 23 inches |
| Weight | 71 pounds |
| Color | Glossy Finish |
| Model | 226327 |
Frequently asked questions
Does the BAKFlip G2 fit a standard 6-foot bed?
No. This cover is designed specifically for the 6' 7" bed found on 2015-2020 Ford F-150 models. The listing specifies a bed length of 81 inches. You must verify your exact bed dimensions before purchasing to ensure proper fitment and secure mounting.
How heavy is the BAKFlip G2 hard cover?
The cover weighs 71 pounds. This weight comes from its rigid aluminum panel construction and quad-fold hardware. The substantial mass helps keep the panels stable and secure while driving, though it requires more effort to fold and store than lighter vinyl alternatives.
What does the quad-fold design allow you to do?
The quad-fold mechanism lets the cover break into four distinct sections. You can fold the panels back partially for partial bed access or flip them entirely upright for full bed clearance. This layout provides flexible cargo management while maintaining a low profile when closed.
Is the BAKFlip G2 made of aluminum or vinyl?
It is a hard cover made of rigid aluminum panels. The listing describes a glossy finish on these aluminum slats. This hard structure offers better protection against dents and impacts compared to flexible vinyl, providing a more durable barrier for your cargo and truck bed.
What is the height of the closed BAKFlip G2?
The cover stands 9 inches tall when closed. This height profile sits low over the bed rails. It helps maintain aerodynamics and keeps the truck looking sleek. The 9-inch width of the individual panels contributes to this overall structural dimension.
Which Ford F-150 model years are compatible?
This cover fits Ford F-150 models from 2015 to 2020. It is specifically engineered for the 6' 7" bed size available during those years. You must confirm your truck's model year and bed length to ensure the mounting system aligns correctly with your vehicle's rails.