RealTruck Extang Trifecta 2.0 Soft Review: Specs, Pros and Cons
As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.
This realtruck extang trifecta 2 0 soft review covers the 92456 model for 2019-2026 Chevy Silverado and GMC Sierra trucks with a 5' 10" bed. The cover weighs 35 pounds and folds into three sections. It uses a leather-grain marine-grade vinyl that resists fading and water. Two EZ-Lock clamps at the tailgate secure the cover. You can remove the entire unit in minutes without special tools. The design eliminates side rails for a simpler setup. This soft folding tonneau cover prioritizes ease of use and straightforward operation for daily drivers.
What stands out
- Marine-grade leather-grain fabric deflects water and resists fading
- Two EZ-Lock clamps at the tailgate for secure locking
- Fully assembled design requires no side rails or special tools
- Manual fold operation with cab buckles for quick removal
- Fits 5' 10" beds on 2019-2026 Silverado and Sierra models
Who it fits
Good fit for
You should choose this cover if you want a simple, no-frills solution for your 5' 10" bed. It suits drivers who frequently need full bed access, as the entire unit removes quickly. The lack of rails makes it ideal for those who dislike complex installations. The marine-grade material is a good fit for owners in wet climates who need basic water deflection. If you prefer manual operation over motorized systems, this soft folding cover offers reliable utility.
Who should skip it
Skip this option if you need a hard cover for maximum security or impact resistance. The vinyl material does not provide the same level of theft protection as aluminum or fiberglass options. If you require a completely waterproof seal, note that this cover only deflects water. It is also not suitable for trucks with factory toolboxes or MultiPro tailgates. Buyers seeking a motorized, automated opening system will find this manual fold cover too basic for their needs.
Verdict: The Trifecta 2.0 delivers straightforward protection with easy installation for compatible Silverado and Sierra beds. It is a practical choice for those who value quick removal and simple operation over premium security features.
Key specs explained for this cover
Bed Size: 5' 10" Bed (69.9")
This cover is designed specifically for trucks with a 5-foot-10-inch bed, which measures 69.9 inches in length. You must verify your truck bed length before purchasing, as a mismatch will result in improper fitment or coverage gaps. This dimension ensures the cover aligns correctly with the bed rails and tailgate, providing a secure seal and a streamlined profile that matches the vehicle's original design.
Material: Leather-grain marine grade fabric
The cover uses a durable marine-grade vinyl with a leather-grain texture. This material is engineered to resist fading from sun exposure and deflect water away from your cargo. It offers excellent tension to prevent fluttering at highway speeds. This construction protects your bed contents from rain and UV damage while maintaining a sleek, low-profile appearance that complements your truck's aesthetic.
Lock Type: Two EZ-Lock clamps at tailgate
Security is managed through two EZ-Lock clamps located at the tailgate. These clamps secure the cover in place, preventing unauthorized access to your truck bed. You simply pull down the clamps to lock the cover. This mechanism provides a reliable way to keep your gear safe without the complexity of multiple key locks or separate locking bars, offering straightforward protection for your equipment.
Operation: Manual fold, buckle to cab
You operate this cover manually by folding it into sections and securing it near the cab with a buckle. This allows you to partially or fully expose the bed for hauling items like furniture or appliances. The manual system requires no power or electronics, ensuring reliability in all weather conditions. You can remove the entire cover in minutes when you need maximum bed utility for large loads.
Weight: 35 pounds
The cover weighs 35 pounds, which is typical for a soft folding tonneau cover. This weight provides enough mass to stay secure during driving while remaining light enough for one person to handle. You can lift and fold the cover without assistance. The weight also contributes to the cover's stability, reducing the likelihood of it shifting or flapping while you are on the road.
Design and build quality
The Trifecta 2.0 is a soft folding tonneau cover constructed from leather-grain marine-grade fabric. According to the listing, this material is designed to deflect water and resist fading. It provides excellent tension to prevent flutter at highway speeds. The cover does not use rails. Instead, it relies on two EZ-Lock clamps at the tailgate for locking. You pull down these clamps to fold the cover twice, then buckle it to the cab. This manual operation allows you to remove the entire unit in minutes.
The cover weighs 35 pounds and measures 74 inches in length and 30 inches in width. It folds into three sections, resulting in a stacked height of 5 inches when fully closed. This low profile keeps the bed accessible while maintaining a sleek look. The model number 92456 specifies the fit for 2019-2026 Chevy Silverado and GMC Sierra trucks with a 5' 10" bed. You must ensure your truck matches this exact bed size and lacks factory toolboxes or a MultiPro tailgate. The leather grain vinyl finish offers a durable surface that guards against the elements. The design prioritizes simple installation and straightforward operation without special tools.
Setup and daily operation
Installation relies on a clamp-based system rather than rails. The cover arrives fully assembled, which simplifies the initial setup. You position the unit on the bed and secure the two cab clamps to the bed wall. This process requires no special tools. The listing notes that removal from the packaging takes longer than the actual installation. For daily operation, the cover uses a manual folding mechanism. You pull down two EZ-Lock clamps located at the tailgate to unlock the cover. You then fold the three sections of the vinyl twice. Finally, you buckle the folded cover to the cab. This sequence allows you to access the full bed length in minutes. The design supports quick removal if you need to haul large items, such as furniture. The leather-grain marine-grade fabric is engineered to resist fading and deflect water. It maintains tension to prevent flutter while driving. The cover fits 2019-2026 Chevy Silverado and GMC Sierra models with a 5-foot-10-inch bed. It is not compatible with factory toolboxes or the MultiPro tailgate. The width measures 30 inches, and the folded height is 5 inches. The total length is 74 inches, and the unit weighs 35 pounds. This weight distribution helps keep the cover stable during use. The EZ-Lock clamps provide the primary locking mechanism, securing the cover when folded. This setup prioritizes straightforward utility over complex hardware.
Before you buy this cover
You must verify your truck bed length matches the 5' 10" specification. The listing explicitly states this model does not fit trucks with factory toolboxes or a MultiPro tailgate. Check your tailgate type before ordering to avoid incompatibility. You will need to ensure your cab clamps can secure to the bed wall without obstruction. This soft folding cover is designed for easy removal when you need to haul large items like sofas. Unlike hard covers, it folds compactly but offers less security than rigid alternatives. It sits in the middle of the spectrum for protection and utility. You should inspect the leather-grain fabric regularly for debris. Clean it with mild soap to maintain its water-deflecting properties. This cover suits drivers who prioritize quick access and simple installation over maximum security. It fits well alongside other soft folding options if you value convenience. Just remember to buckle it securely to the cab after folding.
Check before you buy
- Confirm your bed is exactly 5' 10" long.
- Check that you do not have a factory toolbox.
- Verify your tailgate is not the MultiPro style.
- Ensure cab clamps can attach to the bed wall.
The product at a glance
RealTruck Extang Trifecta 2.0 Soft Folding Cover
Best for: simple tool-free installation and quick removal
- Compatible Truck
- 2019-2026 Chevy/GM Silverado/Sierra
- Bed Size
- 5' 10" Bed (69.9")
- Cover Style
- Soft Folding
- Material
- Leather-grain marine grade fabric
- Lock Type
- Two EZ-Lock clamps at tailgate
- Waterproof
- Water deflecting fabric
View on Amazon: RealTruck Extang Trifecta 2.0 Soft Folding Cover Affiliate link
The Extang Trifecta 2.0 is a soft folding tonneau cover for 2019-2026 Chevy Silverado and GMC Sierra trucks with a 5' 10" bed. It uses marine-grade leather-grain fabric to deflect water and resist fading. The cover weighs 35 pounds and folds twice for cab access. It secures with two EZ-Lock clamps at the tailgate. You get full utility when you remove it quickly. It suits drivers who want simple, tool-free installation and reliable daily protection.
Pros
- Marine-grade leather-grain fabric deflects water and resists fading
- Fully assembled design allows installation without special tools
- Two EZ-Lock clamps secure the cover at the tailgate
- Folds in half twice for easy cab access
- Removable cover takes minutes to detach for hauling large items
Cons
- Fabric only deflects water rather than providing a sealed waterproof barrier
- Manual operation requires folding and buckling without remote or motorized assist
- Excludes compatibility with factory toolboxes or MultiPro tailgates
Good fit if
- You need a soft cover that removes quickly for hauling bulky items
- You want a fully assembled cover that installs without rails or tools
- You drive a 2019-2026 Silverado or Sierra with a standard 5' 10" bed
Skip if
- You require a fully waterproof seal against heavy rain
- You own a factory toolbox or MultiPro tailgate
- You prefer motorized or remote-controlled operation
Verdict: Extang Trifecta 2.0 Soft Folding Cover offers straightforward protection for 5' 10" bed trucks. It fits buyers who prioritize easy removal and tool-free setup over automated convenience or absolute water tightness.
Specifications side by side
| Spec | RealTruck Extang Trifecta 2.0 Soft Folding Cover |
|---|---|
| Compatible Truck | 2019-2026 Chevy/GM Silverado/Sierra |
| Bed Size | 5' 10" Bed (69.9") |
| Cover Style | Soft Folding |
| Material | Leather-grain marine grade fabric |
| Lock Type | Two EZ-Lock clamps at tailgate |
| Waterproof | Water deflecting fabric |
| Operation | Manual fold, buckle to cab |
| Structure | Soft |
| Dimensions | 74 × 30 × 5 inches |
| Weight | 35 pounds |
| Size | 5' 10" Bed |
| Color | Leather Grain Vinyl |
| Model | 92456 |
Frequently asked questions
Does the RealTruck Extang Trifecta 2.0 fit a 6-foot bed?
No. This model is designed specifically for 5-foot-10-inch beds. The listing specifies a length of 74 inches. It is not compatible with standard 6-foot truck beds. You must verify your exact bed measurement before purchasing to ensure proper fitment and function.
How heavy is the Trifecta 2.0 soft cover?
The cover weighs 35 pounds. This weight is distributed across three folding panels. The leather-grain vinyl construction contributes to this mass. You can handle the weight easily during installation or removal, as the unit folds compactly for storage.
What color options are available for this cover?
The listed option features a leather grain vinyl finish. This dark, textured color mimics leather while providing durability. The marine-grade material is designed to resist fading from sun exposure. Check the specific listing for current color availability, as options may vary by truck model.
Can I install this cover without tools?
Yes. The design uses a clamp-based system that requires no special tools. You position the cover on the bed and secure the cab clamps directly to the bed wall. The unit arrives fully assembled, which simplifies the initial setup process significantly for most users.
Does this cover work with a MultiPro tailgate?
No. The listing explicitly states this model does not fit trucks equipped with a MultiPro tailgate. You must check your tailgate type before ordering. Using an incompatible tailgate will prevent proper installation and may damage the cover or the truck bed rail.
What trucks is this cover compatible with?
It is compatible with Chevy Silverado and GMC Sierra trucks. The specific model fits the 5-foot-10-inch bed size. Always verify the year and bed length match the product specifications. Mismatched dimensions will result in improper fitment and potential operational issues with the folding mechanism.