6 Best Alternatives to the YITAMOTOR Running Boards Compatible 2019-2026 (2026)
As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.
The YITAMOTOR 6" Aluminum Running Boards offer a sturdy 450 lb capacity and rust-resistant aluminum build for Crew Cab trucks. If you need yitamotor running boards compatible alternatives, you might want a different step width, material, or fitment range. The original product provides a wide 6-inch step and bolt-on installation without drilling, but its specific 2019-2026 fitment may not suit older models or lifted trucks.
We selected these alternatives because their published specifications overlap with the YITAMOTOR design. You can find options with varying heights, materials like steel or aluminum, and different weight capacities. Some choices suit older 2007-2018 Crew Cabs, while others target lifted vehicles with two-stair designs. Each option here addresses specific needs, such as a narrower profile for daily drivers or higher load limits for heavy use. Compare the step width, length, and installation method to find the best match for your truck.
How these alternatives compare
COMNOVA 6" Running Boards for Silverado/Sierra Crew Cab
The COMNOVA 6-Inch Steel Running Board targets older 2007-2018 Crew Cab models, whereas the YITAMOTOR unit fits 2019-2026 trucks. COMNOVA uses steel with a black finish, offering a 49.6-pound build that feels substantial. It shares the 6-inch width and 2-inch height, providing a similar step profile. However, it lacks the aluminum rust resistance of the YITAMOTOR. This steel option suits owners of older trucks who prefer a heavier, adjustable fitment over corrosion-resistant materials. You get a wide, stable platform for daily access, but you trade the lightweight aluminum durability for a heavier steel construction.
AutoBull 6 Inch Aluminum Side Steps
The AutoBull 6-Inch Aluminum Side Step matches the YITAMOTOR in material and width, making it a direct alternative for Crew Cab owners. It features a black diamond anti-slip finish and measures 2.1 inches in height, slightly taller than the YITAMOTOR’s 2-inch profile. The AutoBull unit is 82.6 inches long, nearly identical to the YITAMOTOR’s 82-inch length. You get a corrosion-resistant aluminum build with a broad, durable footing surface. This option is ideal if you want a similar wide step but prefer a slightly higher platform. It gives up electronic features for simple, robust mechanical reliability.
SOENBOO Crew Cab Running Boards
The SOENBOO Two-Stair Running Boards differ significantly with a two-stair design, offering a different step geometry than the single-step YITAMOTOR. It targets lifted Crew Cab trucks, providing robust support for higher ground clearance. The SOENBOO unit weighs 44 pounds, slightly lighter than the COMNOVA but heavier than typical aluminum steps. It lacks specific width and height specs in the data, focusing on its unique stair design. You should choose this if you need high weight capacity and a distinct step style for a lifted Silverado or Sierra. It gives up the simple single-step profile for a more complex, potentially easier ascent.
AUTOSAVER88 6-Inch Aluminum Running Boards
The AUTOSAVER88 6-Inch Aluminum Running Boards fit older 2007-2018 Crew Cab trucks, contrasting with the YITAMOTOR’s 2019-2026 range. It shares the aluminum material and black finish, ensuring rust resistance. The height is 3 inches, providing a lower step than the YITAMOTOR’s 2-inch height relative to the truck body, or a different drop. It weighs 37 pounds, making it lighter than the steel COMNOVA. This option suits owners of older non-diesel Crew Cabs who need a wide, durable step. You get solid 450 lb support and corrosion-resistant materials, trading the newer truck fitment for compatibility with older models.
Tyger Auto 3.5" Rider Running Boards
The Tyger Auto 3.5-Inch Rider Running Boards offer a slim profile, contrasting sharply with the YITAMOTOR’s 6-inch width. The Tyger unit is 2.95 inches wide, providing a narrower step that reduces bulk on the truck side. It weighs 41.9 pounds and is 86.8 inches long, slightly longer than the YITAMOTOR. This option suits drivers who prioritize low-profile stability and rust resistance over maximum step width. You get a nerf bar style that is less obtrusive, ideal for daily drivers who want durable protection without adding significant side bulk. It gives up the wide 6-inch platform for a sleeker, more compact design.
SMANOW Crew Cab Running Boards
The SMANOW 3-Inch Steel Running Boards fit 2019-2026 Crew Cab trucks, matching the YITAMOTOR’s year range. However, SMANOW uses steel, weighing 54 pounds, which is significantly heavier than the aluminum YITAMOTOR. The step width is 4 inches, narrower than the YITAMOTOR’s 6 inches, but the height is 4.7 inches, providing a higher step. This option offers a 450-pound capacity, matching the YITAMOTOR’s rating. You should pick this if you need high weight capacity and a robust steel build for heavy-duty use. It gives up the lightweight aluminum and wide 6-inch platform for a heavier, narrower, and taller steel step.
Quick picks
Our 7 picks
YITAMOTOR 6" Aluminum Running Boards
Best for: Crew Cab trucks needing a 450 lb step
- Compatible Vehicle
- 2019-2026 Silverado/Sierra 1500
- Cab Size
- Crew Cab
- Material
- aluminum alloy
- Step Width
- 6 in
- Installation
- no-drill bolt-on
- Finish
- powder coated
View on Amazon: YITAMOTOR 6" Aluminum Running Boards Affiliate link
This is a set of 6-inch aluminum alloy running boards designed for the 2019-2026 Silverado and Sierra 1500 Crew Cab. The step pad offers a 450 lb weight capacity and uses a rust-resistant powder coat finish. Installation is a bolt-on process that aligns with factory holes, requiring no drilling. It provides a sturdy step for easier entry and exit from your truck bed.
Pros
- Constructed from aluminum alloy for rust resistance
- 6-inch wide step pad for stable footing
- 450 lb weight capacity per side
- Bolt-on installation with no drilling required
Cons
- Limited to Crew Cab models only
- Professional installation is recommended despite bolt-on design
- Does not fit the 2019 1500 LD variant
Good fit if
- You drive a Crew Cab Silverado or Sierra 1500
- You need a step with a 450 lb load rating
- You prefer aluminum construction over steel
Skip if
- You own a Double Cab or Extended Cab truck
- You drive a 2019 1500 LD model
- You require a step wider than 6 inches
Verdict: YITAMOTOR 6" Aluminum Running Boards delivers a durable, high-capacity step for Crew Cab trucks. It suits owners who want a rust-resistant aluminum build and a secure 450 lb platform for daily access.
COMNOVA 6" Running Boards for Silverado/Sierra Crew Cab
Best for: older crew cab trucks needing wide steps
- Compatible Vehicle
- 2007-2018 Silverado/Sierra 1500
- Cab Size
- Crew Cab
- Material
- Carbon steel
- Step Width
- 6-inch
- Installation
- Direct bolt-on, no need to drill
- Finish
- Powder coated
View on Amazon: COMNOVA 6" Running Boards for Silverado/Sierra Crew Cab Affiliate link
This COMNOVA running board is a 6-inch wide side step made from heavy-duty galvanized steel with a powder-coated black finish. It fits 2007-2018 Silverado/Sierra 1500 Crew Cabs and supports up to 500 lbs. The design allows for forward and backward adjustment during installation. It offers a secure footing for easier entry and exit. You should choose this if you need a robust, adjustable step for older crew cab models.
Pros
- 6-inch wide step for secure footing
- 500 lb weight capacity
- Adjustable slider design for customization
- Galvanized steel construction with powder coat
Cons
- Limited to 2007-2018 model years
- Not compatible with 2020-2025 models
- Excludes diesel engine variants
Good fit if
- You own a 2007-2018 Silverado or Sierra Crew Cab
- You want a wider 6-inch step for easier boarding
- You need adjustable fitment during installation
Skip if
- You drive a 2020-2025 Silverado or Sierra
- You have a diesel engine model
- You require a stainless steel finish
Verdict: COMNOVA 6-Inch Steel Running Board is a durable, high-capacity step for owners of 2007-2018 crew cab trucks who value adjustability and a wide stance.
AutoBull 6 Inch Aluminum Side Steps
Best for: Crew Cab owners needing wide, durable steps
- Cab Size
- Crew Cab
- Material
- Aluminum
- Step Width
- 6 inches
- Finish
- Black powder coated
- Compatible Truck
- Chevy Silverado, GMC Sierra
- Style
- Side Steps
View on Amazon: AutoBull 6 Inch Aluminum Side Steps Affiliate link
This AutoBull side step is built from rust-resistant aluminum with a black powder-coated finish. It offers a 6-inch wide stepping area, which is wider than many competitors, to assist with truck entry. The unit measures 2.1 inches in height and 82.6 inches in length for the Silverado Crew Cab. Unique ABS corner covers and a honeycomb anti-slip center add style and protection against debris. It includes mounting brackets and comes with a 36-month warranty.
Pros
- 6-inch wide stepping surface for easier access
- Rust-resistant aluminum construction with black powder coating
- ABS plastic corner covers protect edges from damage
- Honeycomb anti-slip design on the center step
- Includes mounting brackets and hardware for installation
Cons
- Limited to Crew Cab models only
- Does not include LED lighting or motorization
- Excludes 2019 LD/LT models from compatibility
Good fit if
- You want a wider 6-inch step for easier entry
- You need rust-resistant aluminum for long-term durability
- You drive a Crew Cab Silverado or Sierra
Skip if
- You require motorized or LED-equipped running boards
- You drive a Double Cab or Extended Cab truck
- You need compatibility with 2019 LD/LT models
Verdict: AutoBull 6-Inch Aluminum Side Step provides a wide, durable step for Crew Cab owners. It suits buyers prioritizing a broad footing surface and corrosion-resistant materials over electronic features.
SOENBOO Crew Cab Running Boards
Best for: lifted Crew Cab trucks needing high weight capacity
- Compatible Vehicle
- 2019-2026 Silverado/Sierra 1500, HD
- Cab Size
- Crew Cab
- Material
- Carbon steel
- Installation
- Bolt-on, no drilling
- Finish
- Black powder coating
- Weight Capacity
- 550 pounds
View on Amazon: SOENBOO Crew Cab Running Boards Affiliate link
The SOENBOO two-stair running boards are built from 2-millimeter carbon steel with a black powder coating for rust resistance. Each side supports 550 pounds. The design features a dual-layer layout with 6-inch drop-down step pads. This configuration aids access for trucks with lift kits and oversized tires. It fits 2019-2026 Silverado and Sierra Crew Cabs. Installation is a simple bolt-on process requiring no drilling.
Pros
- 550-pound weight capacity per side
- 2-millimeter thick heavy-duty carbon steel construction
- Dual-layer two-stair design for lift kits
- 6-inch drop-down step pads for easier access
- Bolt-on installation in approximately 20 minutes
Cons
- Heavier build at 44 pounds per side
- Limited to Crew Cab models only
- Excludes 2019 1500 LD/Limited variants
Good fit if
- You drive a Crew Cab Silverado or Sierra with a lift kit
- You need high weight capacity for frequent use
- You prefer bolt-on installation without drilling
Skip if
- You own an Extended Cab or Regular Cab truck
- You have a 2019 1500 LD or Limited model
- You prefer a single-step design for easier roof access
Verdict: SOENBOO Two-Stair Running Boards for Crew Cab offers robust support for lifted trucks. You should choose this if you need durable, high-capacity steps for a Crew Cab Silverado or Sierra.
AUTOSAVER88 6-Inch Aluminum Running Boards
Best for: older non-diesel Crew Cab trucks
- Compatible Vehicle
- 2007-2018 Silverado/Sierra 1500
- Cab Size
- Crew Cab
- Material
- aluminum alloy
- Step Width
- 6-inch
- Installation
- bolt-on, no-drill
- Finish
- powder coated
View on Amazon: AUTOSAVER88 6-Inch Aluminum Running Boards Affiliate link
These running boards fit 2007-2018 Silverado/Sierra 1500 and 2500HD/3500HD Crew Cabs. They feature a 6-inch wide aluminum alloy step with a 450 lb weight capacity. The powder-coated finish resists rust and UV damage. You get no-drill bolt-on installation with adjustable sliding rails. They do not fit diesel models with a DEF tank. This set includes two boards and all hardware.
Pros
- 6-inch wide step pad for easier entry
- 450 lb weight capacity on aluminum alloy
- Powder-coated finish resists rust and corrosion
- No-drill bolt-on installation under one hour
Cons
- Does not fit diesel models with DEF tank
- Limited to Crew Cab configurations only
- Heavier set at 37 pounds total
Good fit if
- You drive a non-diesel 1500 Crew Cab
- You need a wide 6-inch step surface
- You prefer aluminum over heavy steel
Skip if
- You own a diesel truck with a DEF tank
- You drive a Double Cab or Regular Cab
- You need steps for 2019 or newer models
Verdict: AUTOSAVER88 6" Aluminum Running Boards offer solid 450 lb support for older non-diesel Crew Cabs. You should choose them if you need a wide step and rust-resistant aluminum for 2007-2018 trucks.
Tyger Auto 3.5" Rider Running Boards
Best for: Low-profile stability and rust resistance
- Compatible Vehicle
- 2019-2026 Silverado / Sierra 1500
- Cab Size
- Crew Cab
- Material
- Carbon steel
- Step Width
- 3.5 inch
- Tube Shape
- Oval
- Installation
- No drilling required
View on Amazon: Tyger Auto 3.5" Rider Running Boards Affiliate link
These Tyger Auto running boards feature a 3.5-inch oval tube step, offering a wider surface than round tubes for better stability. Constructed from carbon steel with a heavy textured powder finish, they resist rust and corrosion. The 500 lb weight capacity and no-drill installation make them a practical upgrade for 2019-2026 Silverado and Sierra Crew Cabs seeking a sleek, low-profile step.
Pros
- 3.5-inch oval tube provides a wider step surface
- 500 lb weight capacity for heavy-duty use
- Seamless carbon steel construction with E-coating
- No drilling required for installation
Cons
- 3.5-inch step is narrower than 6-inch competitors
- Lower ground clearance at approximately 12 inches
- Heavier build at 41.9 pounds
Good fit if
- You prefer a low-profile look that stays close to the body
- You want a wider step surface than standard round tubes
- You need a rust-resistant finish for harsh weather
Skip if
- You require maximum step width for easier access
- You need higher ground clearance for off-road use
- You drive a 2019 LD or Limited model
Verdict: Tyger Auto 3.5" Oval Running Boards suit drivers who prioritize a slim profile and a wide, stable step over maximum height. They are ideal for daily drivers who want durable, rust-resistant protection without adding significant bulk to the truck's side.
SMANOW Crew Cab Running Boards
Best for: Crew Cab trucks needing high weight capacity
- Compatible Vehicle
- 2019-2026 Silverado/Sierra 1500
- Cab Size
- Crew Cab
- Material
- Carbon Steel
- Step Width
- 4 inches
- Installation
- No-drill
- Finish
- Powder coated
View on Amazon: SMANOW Crew Cab Running Boards Affiliate link
SMANOW running boards are built from heavy textured powder-coated steel for the 2019-2026 Silverado and Sierra 1500 Crew Cab. They feature a 4.7-inch drop step and a 3-inch wide tube. The design supports more than 450 pounds. Installation requires no drilling. This sturdy step is ideal for crews who need reliable traction and high load capacity.
Pros
- Textured powder-coated steel construction
- 4.7-inch drop step height
- 3-inch wide step tube
- Supports more than 450 pounds
Cons
- Only fits Crew Cab models
- Heavier 54-pound build
- No mention of side protection panels
Good fit if
- You drive a Crew Cab Silverado or Sierra
- You need a step that holds over 450 pounds
- You prefer steel over aluminum
Skip if
- You have a Double Cab or Extended Cab
- You want a lighter step under 40 pounds
- You need a step for a 2019 Limited model
Verdict: SMANOW 3" Steel Running Boards provide a robust 450-pound capacity for Crew Cab trucks. You get a wide 3-inch step with a 4.7-inch drop, making it a solid choice for heavy-duty daily use.
Specifications side by side
| Spec | YITAMOTOR 6" Aluminum Running Boards | COMNOVA 6" Running Boards for Silverado/Sierra Crew Cab | AutoBull 6 Inch Aluminum Side Steps | SOENBOO Crew Cab Running Boards | AUTOSAVER88 6-Inch Aluminum Running Boards | Tyger Auto 3.5" Rider Running Boards | SMANOW Crew Cab Running Boards |
|---|---|---|---|---|---|---|---|
| Compatible Vehicle | 2019-2026 Silverado/Sierra 1500 | 2007-2018 Silverado/Sierra 1500 | not stated | 2019-2026 Silverado/Sierra 1500, HD | 2007-2018 Silverado/Sierra 1500 | 2019-2026 Silverado / Sierra 1500 | 2019-2026 Silverado/Sierra 1500 |
| Cab Size | Crew Cab | Crew Cab | Crew Cab | Crew Cab | Crew Cab | Crew Cab | Crew Cab |
| Material | aluminum alloy | Carbon steel | Aluminum | Carbon steel | aluminum alloy | Carbon steel | Carbon Steel |
| Step Width | 6 in | 6-inch | 6 inches | not stated | 6-inch | 3.5 inch | 4 inches |
| Tube Shape | not stated | not stated | not stated | not stated | not stated | Oval | not stated |
| Installation | no-drill bolt-on | Direct bolt-on, no need to drill | not stated | Bolt-on, no drilling | bolt-on, no-drill | No drilling required | No-drill |
| Finish | powder coated | Powder coated | Black powder coated | Black powder coating | powder coated | E-coating textured powder finish | Powder coated |
| Weight Capacity | 450 lb | 500 lbs | not stated | 550 pounds | 450 lb. | 500 lb. | 450 pounds |
| Compatible Truck | Chevy Silverado, GMC Sierra | Chevy Silverado, GMC Sierra | Chevy Silverado, GMC Sierra | Chevy Silverado, GMC Sierra | Chevy Silverado, GMC Sierra | Chevy Silverado, GMC Sierra | Chevy Silverado, GMC Sierra |
| Width | 6 inches | 6 inches | 6 inches | not stated | 6 inches | 3.5-Inch | 4 inches |
| Style | Side Steps | Side Steps | Side Steps | Side Steps | Side Steps | Nerf Bars | Side Steps |
| Dimensions | 82 × 6 × 2 inches | 89 × 6 × 2 inches | 82.6 × 6 × 2.1 inches | not stated | 82.5 × 6 × 3 inches | 86.8 × 2.95 × 4.61 inches | 83 × 4 × 4.7 inches |
| Weight | not stated | 49.6 pounds | not stated | 44 pounds | 37 pounds | 41.9 pounds | 54 pounds |
| Size | 6 inches | 07-18 Silverado Crew Cab | Silverado 19-26 Crew | Silverado Sierra Crew | 6"-W | Silverado / Sierra Crew Cab (4th Gen) | 19-26 Silverado Crew cab |
| Color | Black | Black | Alu-diamond anti-slip black | Two Stair Design | Black | Black | BLACK |
| Model | GYQOKXV | 15655H6-BLK-8-C | ABRB-1006 | Silverado Sierra Running Board Crew Cab | U3M0L2E | TG-SS2C35068 | BCKA15835-C |
Readers of this guide also look at connelly wakesurf board alternatives.
Frequently asked questions
Do these alternatives fit non-Crew Cab trucks?
No. Every product in this list is designed specifically for Crew Cab configurations. The data confirms compatibility with Chevy Silverado and GMC Sierra Crew Cab models. You cannot use these side steps on Standard or Double Cab variants because the mounting points and length differ. Check your cab size before purchasing to ensure proper fitment.
Which option offers the widest step surface?
The COMNOVA and AutoBull models both provide a 6-inch width. This broader surface area offers more stable footing compared to narrower options like the Tyger Auto 3.5-inch model. A wider step is helpful if you wear larger boots or prefer a more secure stance when entering or exiting your vehicle.
Are there aluminum options that resist rust?
Yes. The YITAMOTOR, AutoBull, and AUTOSAVER88 running boards are constructed from aluminum. Aluminum naturally resists corrosion better than steel, making these choices ideal for regions with heavy rain, snow, or road salt. The AutoBull model also features an anti-slip black finish to enhance grip while maintaining material durability.
Which running board is best for lifted trucks?
The SOENBOO Two-Stair Running Boards are recommended for lifted Crew Cab trucks. Their two-stair design provides additional vertical clearance, which is necessary when the truck body sits higher off the ground. This structure helps maintain a comfortable step height and weight capacity for vehicles that have been modified with suspension lifts.
What is the difference between side steps and nerf bars?
Side steps typically feature a flat, wide platform for stepping, while nerf bars often have a rounder or oval profile. The Tyger Auto model is classified as a nerf bar with a 2.95-inch width, offering a slim profile. In contrast, the AutoBull side step provides a 6-inch flat surface for broader support.
Do any models include a two-stair design?
Yes, the SOENBOO running board features a two-stair design. This configuration includes an upper and lower step, which can make entry easier for taller vehicles or those with significant ground clearance. Other models in this list use a single-level step design, which is simpler but may require more effort for lifted trucks.
Which option is the lightest to install?
The AUTOSAVER88 model weighs 37 pounds, making it the lightest option in this group. Lighter units can be easier to handle during installation and place less stress on the truck's mounting points. Heavier steel options, like the SMANOW board at 54 pounds, offer robustness but require more effort to maneuver.
Are these compatible with diesel engine models?
The AUTOSAVER88 listing specifies fitment for older non-diesel Crew Cab trucks. While other models do not explicitly exclude diesel engines, you should verify your specific truck year and engine type against the manufacturer's compatibility list. Diesel models often have different underbody components that may interfere with standard mounting brackets.