Youxmoto 5.7ft Review (2026): A Spec-Based Look

What stands out

• Double PVC tarp material resists tears and UV damage
• Three stainless steel support rods enhance load-bearing capacity
• Integrated Velcro side seals prevent water pooling
• Tool-free, no-drill installation takes approximately 20 minutes
• Compatible with Fleetside beds without Ram Box

Who it fits

Key specs explained for this cover

Bed Size: 5.7 ft (67.4'')

This measurement defines the exact truck bed length the cover is engineered to fit. You must match this dimension to your truck’s inner bed width. If your bed is longer or shorter, the cover will not secure properly. This spec ensures the side rails align with the bed caps. Always verify your bed size before purchasing to avoid fitment issues.

Material: Double PVC tarp

The cover uses two layers of PVC material rather than a single sheet. This double construction increases tear resistance and blocks more sunlight. It helps protect your cargo from rain and UV damage. The material remains flexible in cold weather. This durability level suits buyers who need reliable weather protection without the weight of hard covers.

Cover Style: Soft Roll-Up

This style rolls up toward the cab, leaving the entire bed open when needed. You gain full access to your cargo area without removing panels. It is lighter than hard covers and easier to operate. This style is ideal for frequent loading and unloading. It offers a balance between security and convenience for daily truck use.

Compatible Truck: Dodge Ram 1500

This listing is specifically designed for Dodge Ram 1500 models. It fits the 2009-2018 generation and the 2019-2024 Classic version. It does not fit the new body style or trucks with Ram Box. You must confirm your truck model year and bed type. This specificity prevents compatibility errors for Ram owners.

Design and build quality

According to the listing, the cover uses a double PVC tarp material. This construction aims to provide tear and UV resistance. You get three stainless steel support rods inside the roll. These rods increase the load-bearing capacity compared to single-rod designs. The soft structure allows the cover to roll up neatly at the cab end. This layout keeps your bed access open while parked. You can secure the rolled portion with straps not detailed in the specs, but the main body remains flat when extended.

The design includes integrated Velcro side seals along the rails. You adjust the rear tension system to tighten the cover. This mechanism helps shed water and prevents pooling. The fit is described as drum-tight and wrinkle-free. This suggests a snug seal against the truck bed rails. The cover is tool-free to install. You use the included hardware for a no-drill setup. The process takes about twenty minutes. The finish is black, matching the typical truck bed aesthetic. You must ensure your truck has a Fleetside bed without Ram Box. The design does not fit roll bars or split tailgates. Check your inner bed dimensions carefully before relying on this build.

Setup and everyday use guide

Installation relies on a no-drill system that uses included mounting hardware. You do not need to modify your truck bed rails. The listing states you can complete the secure installation in approximately twenty minutes. This process saves time and reduces hassle compared to permanent fixtures. You simply follow the provided instruction manual to attach the clamps and align the cover.

Daily operation involves rolling the cover back along the stainless steel support rods. These rods help maintain the cover’s shape and support weight when the bed is partially open. The double PVC tarp material is designed to resist tears and UV damage during regular use. You can roll the cover fully to access the entire 5.7 ft bed or leave it partially open for easier reach.

Security and weather protection depend on the integrated Velcro side seals and the adjustable rear tension system. You must ensure the tension is set correctly to achieve a drum-tight fit. This adjustment prevents wrinkles and helps shed water effectively. The seals block rain, snow, dust, and sun from entering the bed. Note that this cover is not compatible with trucks featuring roll bars or split tailgates. You must verify your bed type is Fleetside without Ram Box before relying on these seals for protection. The product includes a one-year warranty to cover manufacturing defects.

Before You Buy This Cover

You should measure your truck bed inner dimensions carefully before ordering. This cover is strictly for Fleetside beds without Ram Box. It does not fit the new body style or trucks with roll bars. You must also ensure your tailgate is not split. The double PVC tarp requires simple upkeep. Wipe it down occasionally to remove dirt and prevent debris from affecting the Velcro seals. Check that the adjustable rear tension system allows for a snug fit. This soft roll-up option sits alongside harder folding or hard rolling covers in the Tonneau Covers & Truck Accessories category. You get a lightweight, flexible solution that rolls up neatly. It is not the most secure option for high-value cargo, but it offers good weather protection. Verify your 2009-2018 Ram 1500 or 2019-2024 Classic model matches these exact specifications. Avoid purchasing if your bed style differs.

Check before you buy

• Measure inner bed length to confirm 5.7 ft fit.
• Verify your truck has a Fleetside bed style.
• Check that your model lacks Ram Box features.
• Ensure your tailgate is not a split design.
• Confirm your truck does not have a roll bar.

The product at a glance

1

Youxmoto 5.7ft Soft Roll-Up Cover

Best for: Dodge Ram 1500 Fleetside owners needing weather protection

Bed Size

5.7 ft (67.4 in)

Cover Style

Soft Roll-Up

Material

Double PVC tarp

Bed Type

Fleetside

Compatible Truck

Dodge Ram 1500, Ram

View on Amazon: Youxmoto 5.7ft Soft Roll-Up Cover Affiliate link

This Youxmoto cover is a soft roll-up design made from double PVC tarp. It fits 5.7 ft beds on Dodge Ram 1500 models from 2009 to 2018 and 2019 to 2024 Classic versions. The build includes three stainless steel support rods for load capacity. Integrated Velcro seals and adjustable rear tension help shed water and keep cargo dry. You get a tool-free installation that takes about 20 minutes.

Pros

• Constructed from double PVC tarp for tear and UV resistance
• Includes three stainless steel support rods for stronger load-bearing
• Integrated Velcro side seals for a tight, wrinkle-free fit
• Tool-free installation with all necessary hardware included
• Comes with a 1-year warranty

Cons

• Not compatible with trucks equipped with Ram Box
• Excluded for trucks with roll bars or split tailgates
• Soft PVC material offers less security than hard covers

Good fit if

• You own a 5.7 ft Fleetside Dodge Ram 1500
• You need a cover that sheds rain and dust effectively
• You prefer a simple roll-up design without complex tools

Skip if

• Your truck has Ram Box side storage
• Your truck has a roll bar installed
• Your truck has a split tailgate

Verdict: Youxmoto 5.7ft Soft Roll-Up Cover provides durable double PVC protection and easy installation for compatible Dodge Ram 1500 Fleetside beds. It suits buyers who prioritize weather resistance and straightforward setup over hard-shell security.

Specifications side by side

Frequently asked questions

See also

• youxmoto 5 7ft alternatives
• best youxmoto tonneau covers under 200
• nyeekoy 7ft climbing dome review
• inoteveritory 7ft pool table review