Tyger Auto LanderX Triangular Nerf Bars Review: Specs, Pros and Cons
As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.
This tyger auto landerx triangular nerf bars review covers the running boards designed for Ford SuperCrew cabs. The product features a triangular carbon steel tube structure with a textured black E-coating finish. Two key specs define its utility: a 500 lb weight capacity and a 5.12 inch drop height. These measurements support easier entry and exit for lifted trucks. The bars measure 85 inches in length and weigh 42.8 pounds. They bolt directly to the rocker panel. This setup aims to provide durable side steps without excessive bulk. The design prioritizes structural strength and corrosion resistance for daily driving conditions.
What stands out
- Triangular carbon steel tubing for enhanced structural support
- 500 lb weight capacity for heavy use
- 5.12 inch drop height aids access for lifted trucks
- Dual-stage E-coating powder finish for rust resistance
- Bolt-on installation requiring approximately 20 minutes
Who it fits
Good fit for
You should consider these if you drive a Ford F-150 or Super Duty SuperCrew Cab with a lift kit. The 5.12 inch drop height specifically addresses the increased ground clearance of lifted vehicles. The 500 lb capacity ensures stability for passengers and gear. The triangular design offers a distinct look while maintaining a 6.38 inch step width. If you need durable, bolt-on steps that resist corrosion, this spec sheet supports that choice. The 20-minute installation time also suits DIY mechanics.
Who should skip it
Skip this option if you drive a SuperCab model, as the data explicitly states it only fits SuperCrew cabs with four full-size doors. The 5.12 inch drop may be excessive if you have a stock-height truck, as it sits lower than standard steps. The triangular shape might not match your preference for classic round or square tube styles. Additionally, if you require a wider step, the 6.38 inch width is narrower than some alternatives. The product is also not listed for Ranger or Bronco models in this specific variation.
Verdict: The Tyger Auto LanderX bars offer a robust, spec-driven solution for lifted SuperCrew Ford trucks. Their triangular steel construction and 500 lb capacity provide reliable support for daily use.
Key specs explained for this product
Weight Capacity: 500 lb
This rating indicates the maximum load the side steps can support. You can stand on both bars simultaneously with up to 500 pounds of combined weight. This allows two adults to use the steps safely during entry and exit. It ensures the structure remains stable under normal use. When comparing truck accessories, check this limit to ensure it matches your typical usage patterns and passenger weight.
Material: Carbon steel
Carbon steel provides high tensile strength and durability for running boards. This material resists bending or breaking under heavy loads. It forms the core structure of the triangular tubes, offering solid support for your steps. Unlike lighter alloys, steel maintains its shape over time. When shopping for truck accessories, prioritize steel for long-term structural integrity and resistance to impact damage.
Step Width: 6.38 inches
This measurement defines the flat surface area available for your foot. A width of 6.38 inches provides ample space for secure footing. It accommodates standard boot sizes without requiring precise placement. This reduces slip risk when entering or exiting your vehicle. Compare this dimension with other nerf bars to ensure the step feels stable and comfortable for your daily driving needs.
Tube Shape: Triangular
The triangular design offers structural rigidity compared to round tubes. This shape distributes weight more effectively across the mounting points. It also creates a distinct aesthetic profile for your truck. The flat surfaces may provide better grip for footwear. When evaluating truck accessories, consider how the geometry affects both visual style and load-bearing performance for your specific vehicle model.
Design and Build Quality
According to the listing, the Tyger Auto LanderX bars use heavy-duty carbon steel molded into a triangular tube structure. This shape provides durable strength and support. The material is finished with a dual-stage E-coating powder textured black coating. This finish improves resistance to rust and corrosion, which is useful if you drive on salted roads or in wet conditions.
The side steps measure 85 inches in length, 6.38 inches in width, and 5.12 inches in height. They weigh 42.8 pounds. The design includes a five-inch drop from the rocker panel. This drop ensures effortless entry and exit for you and your passengers. The product offers approximately 12 inches of ground clearance. This clearance helps protect the bars when you navigate rough terrain or steep driveways.
Installation is a bolt-on process that requires all included hardware and brackets. The listing states installation can be completed in about 20 minutes. The bars are designed specifically for SuperCrew cabs with four full-size doors. They are not compatible with SuperCab models. The triangular layout leaves a lasting impression from all angles. This design choice suits owners of lifted pickup trucks who need both style and functional step height.
Installation And Daily Use Guide
You install these Tyger Auto LanderX bars using a bolt-on method. The package includes all necessary hardware and brackets for mounting directly onto the rocker panel. You can complete the installation in approximately 20 minutes. The system fits only SuperCrew cabs with four full-size doors. It is not compatible with SuperCab models. You must verify your vehicle fitment using the Amazon Confirmed Fit tool before purchasing.
In daily use, the triangular carbon steel tube structure provides a sturdy step. The step width measures 6.38 inches, offering ample surface area for your feet. The bars drop 5.12 inches from the truck body. This height ensures effortless entry and exit, which is particularly useful if you have a lifted truck. The ground clearance remains approximately 12 inches, so you do not need to worry about scraping the bars on typical driveways or speed bumps.
The textured black E-coating finish helps resist rust and corrosion during regular driving conditions. You can stand on both bars simultaneously. The combined weight capacity is 500 lb. This allows two adults to use the steps safely at the same time. The bars weigh 42.8 pounds total. This weight is manageable for most users during the initial setup. The product is backed by a three-year warranty against manufacturing defects for US customers. You can rely on these specifications for consistent performance and safety.
Before you buy Tyger Auto LanderX
You must verify your cab size first. These bars fit SuperCrew cabs with four full doors only. They do not fit SuperCab models. Check the Amazon Confirmed Fit tool with your license plate to ensure proper compatibility for your 2015-2027 Ford F-150 or Super Duty. The 12-inch ground clearance suits lifted trucks well. You may need to check your bed cover clearance if you have a low-profile tonneau cover. While these are running boards, they complement your truck accessories. Clean the textured black finish regularly to maintain its appearance. The carbon steel construction resists rust, but salt and mud can accumulate in the triangular tubes. Wipe them down after off-road trips. The 500 lb capacity allows two adults to step up safely. Ensure your rocker panels are solid before mounting. This product is a durable addition for SuperCrew owners seeking easier access.
Check before you buy
- Confirm your truck has a SuperCrew cab with four doors.
- Enter your license plate in the Amazon Confirmed Fit tool.
- Check that your rocker panels are solid for mounting.
- Ensure clearance for your existing tonneau cover or bed accessories.
The product at a glance
Tyger Auto LanderX Triangular Nerf Bars
Best for: SuperCrew trucks with lifted suspensions
- Cab Size
- Supercrew Cab
- Material
- Carbon steel
- Step Width
- 6.38 inches
- Tube Shape
- Triangular
- Installation
- Bolt-on
- Finish
- E-coating powder textured black
View on Amazon: Tyger Auto LanderX Triangular Nerf Bars Affiliate link
These Tyger Auto LanderX running boards feature triangular carbon steel tubing with a textured black E-coat finish. Designed for SuperCrew cabs, they offer a 5-inch drop and a 500 lb weight capacity. The 6.38-inch step width and 12-inch ground clearance suit lifted trucks. Installation is a 20-minute bolt-on process. They provide durable support for easier entry and exit.
Pros
- Triangular carbon steel tube structure for durable strength
- 500 lb weight capacity for heavy use
- 5-inch drop height aids entry and exit
- Textured black E-coat finish resists rust and corrosion
- Bolt-on installation takes about 20 minutes
Cons
- Limited to SuperCrew Cab models only
- Does not fit SuperCab configurations
- No mention of integrated lighting or LED features
Good fit if
- You drive a SuperCrew Ford F-150 or Super Duty
- You have a lifted truck needing extra ground clearance
- You want a heavy-duty 500 lb step
Skip if
- You own a SuperCab model without four full-size doors
- You need running boards for a non-Ford vehicle
- You require integrated lighting on the side bars
Verdict: Tyger Auto LanderX Triangular Nerf Bars are a sturdy option for SuperCrew owners seeking a 500 lb capacity step. The triangular design and 5-inch drop make them practical for lifted trucks needing easier access.
Specifications side by side
| Spec | Tyger Auto LanderX Triangular Nerf Bars |
|---|---|
| Cab Size | Supercrew Cab |
| Material | Carbon steel |
| Step Width | 6.38 inches |
| Tube Shape | Triangular |
| Installation | Bolt-on |
| Finish | E-coating powder textured black |
| Weight Capacity | 500 lb |
| Compatible Truck | Ford F-150, Ford F-250/350 Super Duty |
| Style | Nerf Bars |
| Dimensions | 85 × 6.38 × 5.12 inches |
| Weight | 42.8 pounds |
| Size | Tyger LanderX |
| Color | Textured Black |
| Model | TG-LX3F82368 |
Frequently asked questions
Do the Tyger Auto LanderX bars fit SuperCab trucks?
No, these bars are designed exclusively for SuperCrew cabs. The product data specifies compatibility with Ford F-150 and F-250/350 Super Duty models that feature four full doors. You cannot install them on SuperCab configurations because the mounting points and length differ. Always verify your cab size before purchasing to ensure the brackets align correctly with your vehicle's rocker panel.
What is the maximum weight capacity for these side steps?
The Tyger Auto LanderX bars support a maximum load of 500 pounds. This rating applies to the combined weight of users standing on both bars simultaneously. The triangular carbon steel tube structure provides the necessary strength to handle this load safely. You can trust this capacity for daily entry and exit, even if two adults step on the bars at the same time.
How wide are the Tyger Auto LanderX running boards?
Each bar measures 6.38 inches in width. This dimension provides a stable foothold for your boots while entering or exiting your truck. The width is paired with a height of 5.12 inches, which creates a 5-inch drop from the truck bed. This combination offers practical leverage for lifted suspensions without compromising ground clearance for normal driving conditions.
What material are the Tyger Auto LanderX nerf bars made from?
The bars are constructed from heavy-duty carbon steel. This material is molded into a triangular tube shape to enhance structural integrity and impact resistance. The steel is finished with a dual-stage E-coating and a textured black powder coat. This coating process helps protect the metal from corrosion, rust, and daily wear from road debris and weather exposure.
Are the Tyger Auto LanderX bars easy to install?
Installation is straightforward using a bolt-on method. The package includes all necessary hardware and mounting brackets required to attach the bars directly to your truck's rocker panel. You can typically complete the installation in about 20 minutes without specialized tools. The design ensures a secure fit that aligns with the pre-drilled holes or mounting points on compatible Ford SuperCrew models.
What color finish do the Tyger Auto LanderX bars have?
The bars feature a textured black finish. This color is achieved through a dual-stage E-coating and powder coating process. The textured surface provides a non-slip grip for footwear and helps hide minor scratches or scuffs that occur during regular use. The black aesthetic blends seamlessly with most truck exteriors while offering durable protection against environmental elements.
How much do the Tyger Auto LanderX nerf bars weigh?
The entire set weighs 42.8 pounds. This weight reflects the heavy-duty carbon steel construction used for durability and load-bearing capacity. The substantial mass ensures the bars remain stable and do not flex under pressure. You should handle the bars with care during installation due to their weight, but the sturdiness contributes to their 500-pound weight rating.