6 Best Alternatives to the Tyger Auto Trax Side Steps Tundra (2026)

How alternatives compare to Tyger

AutoBull 6-Inch Aluminum Side Step

The AutoBull 6-Inch Aluminum Side Step uses aluminum instead of carbon steel. This reduces the weight from 51.3 pounds to 35.9 pounds. You gain rust resistance without the heavy powder coating. The step width is 6 inches, slightly narrower than the Tyger’s 6.3-inch platform. Height is 2.1 inches versus 2.36 inches. This model fits 2007-2021 Crewmax trucks just like the original. You choose this if you want lighter weight and natural corrosion protection. You give up some step width and the specific dual-tube aesthetic. It is a practical choice for daily drivers who prioritize material longevity over maximum step surface area.

SOENBOO Tundra CrewMax 3-Step Side Steps

The SOENBOO Tundra CrewMax 3-Step Side Steps offer a completely different approach with three raised steps. This design aids roof access, which the single-step Tyger cannot provide. The Tyger focuses on a simple dual-tube structure for basic entry and exit. The SOENBOO model is built for lifted trucks needing extra height. It retains the heavy-duty steel construction philosophy but adds functionality for roof racks. You should pick this if you frequently access your roof or bed cap. You give up the simple, low-profile look of the Tyger. The installation complexity may increase due to the multi-step layout. It is best for owners who need utility beyond simple cabin entry.

EYOUHZ 3-Step Tundra Running Boards

The EYOUHZ 3-Step Tundra Running Boards provide a 550-pound weight capacity, exceeding the Tyger’s 500-pound limit. This offers a margin of safety for heavier loads or multiple passengers. Like the SOENBOO, it features three raised steps for roof access. The Tyger is a single step with no roof utility. The EYOUHZ model fits 2022-2026 CrewMax trucks, making it compatible with newer generations. You choose this if you need higher load ratings and roof access. You give up the simpler, dual-tube aesthetic of the Tyger. The additional steps add complexity and potential points of failure. It is ideal for users who prioritize capacity and multi-functionality over minimalist design.

COMNOVA 6" Carbon Steel Side Steps

The COMNOVA 6-Inch Carbon Steel Side Steps are designed for Dodge Ram 1500 Quad Cabs, not Toyota Tundras. This product is incompatible with your Tundra. The Tyger Auto Trax is specifically molded for Toyota Tundra CrewMax fitment. You cannot use this COMNOVA step on your vehicle. It shares similar specs like carbon steel construction and a 6-inch width. However, the mounting points and dimensions are tailored for Ram trucks. You should ignore this option if you own a Toyota. It is only relevant if you are considering switching vehicles or have a Ram. For Tundra owners, this alternative offers no value due to complete fitment mismatch.

SMANOW 3" Tube Side Steps for Tundra

The SMANOW 3-Inch Tube Side Steps for Tundra feature a 450-pound weight capacity, which is 50 pounds less than the Tyger. The step width is 4 inches, significantly narrower than the Tyger’s 6.3-inch platform. This may feel less stable for some users. The height is 4.7 inches, much taller than the Tyger’s 2.36 inches. It fits 2022-2026 CrewMax cabs. You choose this if you prefer a taller step for easier access to higher cabs. You give up the wider, more stable footing of the Tyger. The lower weight capacity is a drawback for heavy loads. It is suitable for owners who prioritize height over step width and maximum load strength.

Tyger Auto Drop Step for Tundra

The Tyger Auto Drop Step for Tundra is a different product line from the same brand. It features a drop-down mechanism, unlike the fixed dual-tube Tyger Trax. The step width is 7.24 inches, wider than the Trax’s 6.3 inches. Height is 5.59 inches, much taller than the 2.36-inch Trax. It fits 2022-2027 Tundra models. You choose this if you want a retractable step that hides when not in use. You give up the permanent, robust structure of the Trax. The mechanical parts add potential points of failure. It is ideal for owners who prioritize aesthetics and ground clearance when the step is retracted over fixed durability.

Quick picks

Our 7 picks

1 Best overall

Tyger Auto Trax Side Steps Tundra CrewMax

Best for: heavy-duty daily use on CrewMax trucks

Compatible Vehicle

2007-2021 Toyota Tundra

Cab Size

CrewMax

Material

Carbon steel

Step Width

6.3 inches

Tube Shape

Dual-tubular

Installation

Bolt-on, no drilling required

View on Amazon: Tyger Auto Trax Side Steps Tundra CrewMax Affiliate link

These side steps are built for the 2007-2021 Toyota Tundra CrewMax. They feature a dual-tubular carbon steel construction with a textured black powder E-coating finish. The step width is 6.3 inches, providing a solid surface. They support up to 500 lb and sit approximately 15 inches off the ground. Installation is bolt-on and requires no drilling. You get both driver and passenger sides in one package.

Pros

• 500 lb weight capacity for sturdy support
• Dual-tubular carbon steel construction for durability
• Textured black powder E-coating resists rust
• Bolt-on installation with no drilling required

Cons

• Limited to CrewMax cab size only
• Heavier build at 51.3 pounds per bar
• Only fits 2007-2021 Tundra models

Good fit if

• You own a 2007-2021 Toyota Tundra CrewMax
• You need a high weight capacity for heavy use
• You want a no-drill bolt-on installation

Skip if

• You drive a Tundra Double Cab
• You have a 2022 or newer Tundra
• You prefer a lighter aluminum step

Verdict: Tyger Auto Trax Tundra Side Steps offers a robust, heavy-duty solution for 2007-2021 Tundra CrewMax owners who prioritize structural integrity and high load capacity over lightweight materials.

2 Best budget

AutoBull 6-Inch Aluminum Side Step

Best for: 2007-2021 Toyota Tundra Crewmax owners

Compatible Vehicle

2007-2021 Toyota Tundra

Cab Size

Crewmax Cab (4 full size doors)

Material

Aluminum

Step Width

6 inches

Finish

Black powder coated

Style

Side Steps

View on Amazon: AutoBull 6-Inch Aluminum Side Step Affiliate link

AutoBull side steps fit 2007-2021 Toyota Tundra Crewmax cabs. They feature a 6-inch wide aluminum step with a black powder-coated finish. The unit weighs 35.9 pounds and measures 82.6 inches long. The design includes ABS corner covers and a honeycomb anti-slip surface. These steps protect your truck’s exterior from debris and minor impacts while providing a stable entry point.

Pros

• 6-inch wide stepping area for easier entry
• Rust-resistant aluminum construction with black powder coat
• ABS plastic corner covers for edge protection
• Honeycomb anti-slip surface for traction
• Includes mounting brackets and hardware

Cons

• Limited to Crewmax cab configuration only
• Heavier build at 35.9 pounds per pair
• Only one height option listed (2.1 inches)

Good fit if

• You own a 2007-2021 Toyota Tundra Crewmax
• You want rust-resistant aluminum side steps
• You prefer a wide 6-inch stepping surface

Skip if

• You drive a 2022 or newer Tundra
• You have a Double or Extended cab Tundra
• You need a step height of 4 inches

Verdict: AutoBull 6" Aluminum Side Steps for Tundra provides durable protection and a wide step for 2007-2021 Crewmax owners. It is a solid choice if you need a robust, rust-resistant step that fits your specific cab style.

3 Best premium

SOENBOO Tundra CrewMax 3-Step Side Steps

Best for: roof access on lifted Tundra CrewMax trucks

Compatible Vehicle

2022-2026 Toyota Tundra

Cab Size

CrewMax Cab

Material

Carbon steel

Installation

No-drill bolt-on

Finish

Black powder coating

Weight Capacity

550 pounds

View on Amazon: SOENBOO Tundra CrewMax 3-Step Side Steps Affiliate link

This SOENBOO running board fits 2022-2026 Toyota Tundra CrewMax cabs. It uses 2mm carbon steel with a black powder coating for rust resistance. The three-step design helps you reach the roof, even with lift kits. Each side supports 550 pounds. Installation is a 20-minute bolt-on process with no drilling needed. It suits owners who need durable access to their truck bed or roof rack.

Pros

• Three raised steps for easier roof access
• 550-pound weight capacity per side
• 2mm carbon steel construction
• No-drill bolt-on installation

Cons

• Limited to Tundra CrewMax cab only
• No mention of LED lighting
• Standard black finish only

Good fit if

• You own a 2022-2026 Toyota Tundra CrewMax
• You need to access your roof rack frequently
• You want a heavy-duty 550 lb capacity

Skip if

• You drive a Double Cab or Access Cab Tundra
• You prefer a two-step design
• You need LED lights for night visibility

Verdict: SOENBOO Tundra CrewMax 3-Step Side Steps provides a sturdy, high-capacity solution for Tundra CrewMax owners. It is ideal for those who prioritize roof access and heavy-duty steel construction over aesthetic variety.

4 Also great

EYOUHZ 3-Step Tundra Running Boards

Best for: Tundra CrewMax owners needing roof access

Compatible Vehicle

2022-2026 Toyota Tundra

Cab Size

CrewMax Cab

Material

Carbon steel

Installation

No-drill bolt-on

Finish

Black powder coating

Weight Capacity

550 pounds

View on Amazon: EYOUHZ 3-Step Tundra Running Boards Affiliate link

These side steps fit 2022-2026 Toyota Tundra CrewMax cabs. They are built from 2 mm carbon steel with a black powder coating. Each side supports 550 pounds. The three-step design helps you reach the roof. The bolt-on install takes about 20 minutes. This option suits those needing extra height and durability for lifted trucks.

Pros

• Supports 550 pounds per side
• Built from 2 mm carbon steel
• Three-step design aids roof access
• No-drill bolt-on installation

Cons

• Only fits CrewMax cab models
• Requires checking cab dimensions for fit
• Limited to specific Tundra years

Good fit if

• You drive a 2022-2026 Tundra CrewMax
• You need a 550-pound weight capacity
• You want a three-step design for roof access

Skip if

• You have a Double Cab Tundra
• You prefer a two-step design
• You need compatibility with older Tundra models

Verdict: EYOUHZ 3-Step Tundra Running Boards provide a sturdy 550-pound capacity and a three-step layout for roof access. They are a solid match for owners of 2022-2026 CrewMax trucks who need durable, easy-to-install side steps.

5 Best dodge ram 1500

COMNOVA 6" Carbon Steel Side Steps

Best for: Quad Cab owners needing high load capacity

Compatible Vehicle

2019-2026 Dodge Ram 1500

Cab Size

Quad Cab

Material

Carbon Steel

Step Width

6 in

Installation

Direct bolt-on, no need to drill

Finish

Powder coated

View on Amazon: COMNOVA 6" Carbon Steel Side Steps Affiliate link

These side steps fit 2019-2026 Dodge Ram 1500 Quad Cab trucks. They are made from heavy-duty carbon steel with a black anti-rust powder coat. The 6-inch wide step offers secure footing. Each bar supports up to 500 pounds. They install with direct bolt-on hardware, requiring no drilling. The slider design allows for forward or backward adjustment during mounting.

Pros

• Heavy-duty carbon steel construction resists rust and UV damage
• 6-inch wide step provides secure footing
• 500 lb weight capacity per step bar
• Direct bolt-on installation requires no drilling
• Slider design allows for adjustable positioning

Cons

• Only fits Quad Cab models, not Crew or Mega Cab
• Limited to 2019-2026 model years
• Heavier build at 47.1 pounds per step

Good fit if

• You drive a 2019-2026 Dodge Ram 1500 Quad Cab
• You prefer heavy-duty carbon steel over aluminum
• You want a wide 6-inch step for easier access

Skip if

• You own a Crew Cab or Mega Cab Ram
• You need steps for a 2009-2018 Ram model
• You prefer lightweight aluminum construction

Verdict: COMNOVA 6" Carbon Steel Side Steps are a sturdy, high-capacity option for Quad Cab owners who need durable, easy-to-install steps. They are best for drivers prioritizing load strength and rust resistance over lightweight materials.

6 Best no-drill

SMANOW 3" Tube Side Steps for Tundra

Best for: 2022-2026 Toyota Tundra CrewMax cabs

Compatible Vehicle

2022-2026 Toyota Tundra

Cab Size

CrewMax Cab

Material

Carbon Steel

Step Width

4 inches

Installation

No-drill

Finish

Powder coated

View on Amazon: SMANOW 3" Tube Side Steps for Tundra Affiliate link

SMANOW running boards fit 2022-2026 Toyota Tundra CrewMax cabs. They use heavy steel with a textured powder coat finish. The 3-inch wide step pads offer non-slip traction. A 4.7-inch drop height aids entry. You get a 450-pound weight capacity. Installation requires no drilling. This is a solid option for Tundra owners seeking durable side steps.

Pros

• Heavy steel construction with textured powder coat
• 450-pound maximum load capacity
• 3-inch wide non-slip step pads
• No drilling required for installation

Cons

• Weighs 54.7 pounds per step
• Limited to CrewMax cab only
• No mention of corrosion warranty

Good fit if

• You own a 2022-2026 Tundra CrewMax
• You need a 450-pound load rating
• You prefer no-drill mounting

Skip if

• You drive a Double Cab model
• You want aluminum steps
• You need a warranty listed

Verdict: SMANOW Tundra CrewMax Side Steps provide a sturdy 450-pound capacity for 2022-2026 Toyota Tundra CrewMax cabs. You should buy them if you prioritize heavy steel durability and simple installation over lighter materials.

7 Best drop step

Tyger Auto Drop Step for Tundra

Best for: CrewMax Tundra owners needing high load capacity

Compatible Vehicle

2022-2027 Toyota Tundra

Cab Size

CrewMax

Material

Carbon steel

Tube Shape

Tubular

Installation

Bolt-on

Finish

Textured black

View on Amazon: Tyger Auto Drop Step for Tundra Affiliate link

This Tyger Access drop step is built for the 2022-2027 Toyota Tundra CrewMax. It features a heavy-duty 2-inch carbon steel tube frame with a textured black finish. The unit measures 7.24 inches wide and 5.59 inches high. It supports up to 500 pounds and sits approximately 10 inches above the ground. You get a simple bolt-on installation that takes about 20 minutes.

Pros

• 500 lb weight capacity
• 2-inch carbon steel tube frame
• Textured black corrosion-resistant finish
• 20-minute bolt-on installation

Cons

• Fits only CrewMax cabs, not Double Cab
• No mention of LED lighting integration
• Limited height options compared to other styles

Good fit if

• You drive a 2022-2027 Tundra CrewMax
• You need a high 500 lb load rating
• You want a simple, no-frills design

Skip if

• You own a Tundra Double Cab
• You prefer a step with integrated lights
• You need a wider step than 7.24 inches

Verdict: Tyger Access Drop Step for Tundra is a sturdy, high-capacity option for CrewMax owners who prioritize durability and ease of installation over added features. It delivers reliable support without unnecessary complexity.

Specifications side by side

Frequently asked questions

See also

• borgusi auto incline treadmill alternatives
• weego side by side double stroller alternatives