Tyger Auto Trax Side Steps Tundra Review: Specs, Pros and Cons
As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.
This tyger auto trax side steps compatible review covers the Tyger Auto Trax Side Steps for the Toyota Tundra CrewMax. These running boards are built from heavy-duty 2-inch carbon steel in a dual-tubular design. The listing specifies a textured black powder E-coating finish for rust resistance. You get a step width of 6.3 inches and a weight capacity of 500 lb. The unit measures 84.9 inches long and weighs 51.3 pounds. Installation is bolt-on with no drilling required. This product targets owners of 2007-2021 Tundra CrewMax models seeking sturdy, easy-to-mount side steps.
What stands out
- Heavy-duty 2-inch diameter carbon steel construction
- 500 lb weight capacity for robust support
- Dual-tubular design with textured black powder E-coating
- 6.3-inch wide step surface for secure footing
- Bolt-on installation with no drilling required
Who it fits
Good fit for
You should choose these side steps if you own a 2007-2021 Toyota Tundra CrewMax. The 500 lb weight capacity suits those carrying heavy gear or larger passengers. The no-drill bolt-on installation appeals to drivers who want to preserve their vehicle’s original rocker panels. The dual-tubular carbon steel build offers durability for daily use. The textured black finish blends well with most Tundra exteriors while providing corrosion resistance.
Who should skip it
Skip this product if you drive a Tundra Double Cab. The listing explicitly states it only fits the CrewMax cab with four full-size doors. It will not work with the narrower rear doors of the Double Cab. You should also avoid this if you need a lower step height, as the ground clearance is approximately 15 inches. The 6.3-inch width may feel narrow if you prefer wider stepping surfaces. Check your cab size carefully before purchasing to ensure compatibility.
Verdict: The Tyger Auto Trax Side Steps offer a sturdy, 500 lb rated solution for Tundra CrewMax owners. Its bolt-on carbon steel design provides reliable access without drilling.
Tyger Trax Side Steps Key Specs
Weight Capacity: 500 lb
This rating indicates the maximum static load each side step can support. You can place heavy gear or multiple passengers on the step without risking structural failure. Compare this to lighter aluminum steps that may list lower limits. A 500 lb capacity ensures the step remains stable when you are entering or exiting the truck bed with items.
Material: Carbon steel
Carbon steel provides high tensile strength and durability compared to softer metals. This material resists bending under heavy loads, which is critical for safety. When shopping for truck accessories, steel steps generally offer more robust protection than plastic or thin aluminum alternatives. The dual-tubular design further enhances this structural integrity for daily use.
Step Width: 6.3 inches
A 6.3-inch width provides ample surface area for boot placement. This size accommodates most standard footwear securely, reducing the risk of slipping. Narrower steps may feel cramped or unstable. This width balances stability with a compact profile that does not excessively protrude from the truck body, maintaining a clean aesthetic while offering practical footing.
Installation: Bolt-on, no drilling required
This method allows you to attach the steps using existing mounting points on the rocker panel. You avoid permanent modifications to the truck body, which preserves resale value. This approach simplifies the process for most users. Compare this to drilled installations that require permanent holes. Bolt-on systems typically allow for easier removal if you need to sell the vehicle.
Finish: Textured black powder E-coating
This finish combines electrocoat priming with a textured powder layer for superior corrosion resistance. It protects the carbon steel from road salt, mud, and moisture. The textured surface also offers better grip for footwear compared to smooth finishes. When comparing truck accessories, look for this dual-stage coating to ensure long-term durability in harsh weather conditions.
Design and build details
The Tyger Auto Trax Side Steps for the Toyota Tundra CrewMax use a dual-tubular layout made from 2-inch carbon steel. According to the listing, this heavy-duty construction provides a robust structure for daily use. The steps measure 6.3 inches in width and 2.36 inches in height. Each bar is 84.9 inches long. This size offers a broad foothold for entering and exiting the vehicle. The total weight for both bars is 51.3 pounds. This mass adds stability but requires a solid mounting point on the rocker panel.
The finish is a textured black powder E-coating. This coating is applied to improve resistance against rust and corrosion. It helps protect the steel from road salt and moisture. The design includes a ground clearance of approximately 15 inches. This height allows you to pass over moderate obstacles without scraping the steps. The dual-tube shape is styled for aesthetics while maintaining structural integrity.
Installation is described as bolt-on with no drilling required. All necessary hardware is included to mount the steps directly to the truck. This method preserves the vehicle’s original body panels. The listing specifies a weight capacity of 500 lb per side. This rating ensures the steps can support passengers and gear safely. You should verify your specific model year and cab size in the Amazon Confirmed Fit tool before purchase.
Setup and everyday use details
Installation is a bolt-on process that requires no drilling into the rocker panel. The listing states that all necessary hardware is included in the box. You can mount both the driver and passenger side bars in approximately 20 minutes. This straightforward setup means you do not need specialized tools or professional assistance to get the steps in place.
Once installed, the steps sit approximately 15 inches above the ground. This ground clearance helps prevent the side steps from striking curbs or debris during normal driving. The dual-tubular design creates a steady platform for entering and exiting the vehicle. Each step supports a weight capacity of 500 lb. This rating covers static loads, allowing you to place heavy items or multiple passengers on the step without risking structural failure.
The textured black powder E-coating finish provides improved rust and corrosion resistance. This protective layer helps maintain the appearance of the carbon steel construction over time. The steps are specifically designed for the 2007-2021 Toyota Tundra CrewMax cab size. They are not compatible with the Double Cab, which has narrower rear doors. Verify your vehicle fitment using the Amazon Confirmed Fit tool before purchasing.
Daily use involves stepping onto the 6.3-inch wide surface. The width offers ample room for foot placement. The robust construction ensures stability when you are carrying gear or assisting passengers. The 3-year warranty against manufacturing defects provides additional confidence for US customers. These steps are built for consistent, reliable access to your truck bed and cabin.
Check Fitment And Maintenance Needs
Before you buy, confirm your vehicle matches the listing exactly. This product fits only the CrewMax cab with four full-size doors. It does not fit the Double Cab. Use the Amazon Confirmed Fit tool with your license plate to verify compatibility. The steps add approximately 51.3 pounds to your truck’s weight. Ensure your suspension can handle this additional load comfortably. You will need basic hand tools for the bolt-on installation. No drilling is required, which preserves your rocker panel integrity. Keep the textured black finish clean to maintain its rust-resistant properties. Regularly check the mounting hardware for tightness after off-road use. These side steps complement tonneau covers by improving overall access to your bed. They allow you to load gear more easily without stepping on the cover. Consider them if you frequently carry heavy items. They also enhance safety for passengers entering and exiting the vehicle. The 500-pound weight capacity supports most daily use scenarios. Verify the 15-inch ground clearance fits your driving habits. If you park on uneven terrain, ensure this height is sufficient for your needs.
Check before you buy
- Confirm your Tundra is a CrewMax cab with four full-size doors.
- Use the Amazon Confirmed Fit tool with your license plate number.
- Ensure your suspension can handle the added 51.3 pounds of weight.
- Verify the 15-inch ground clearance suits your typical parking spots.
- Check that you have basic hand tools for the bolt-on install.
The product at a glance
Tyger Auto Trax Side Steps Tundra CrewMax
Best for: Tundra CrewMax owners needing durable steps
- Compatible Vehicle
- 2007-2021 Toyota Tundra
- Cab Size
- CrewMax
- Material
- Carbon steel
- Step Width
- 6.3 inches
- Tube Shape
- Dual-tubular
- Installation
- Bolt-on, no drilling required
View on Amazon: Tyger Auto Trax Side Steps Tundra CrewMax Affiliate link
These side steps fit the 2007-2021 Toyota Tundra CrewMax. They use a dual-tubular carbon steel design with a textured black powder E-coating finish. The steps offer a 500 lb weight capacity and measure 6.3 inches wide. Installation is bolt-on with no drilling required. You get both driver and passenger bars in the package. Ground clearance sits at approximately 15 inches.
Pros
- Heavy-duty 2-inch carbon steel construction
- 500 lb weight capacity
- No drilling required for installation
- Dual-tubular textured black finish
Cons
- Only fits CrewMax cab size
- Does not fit Double Cab models
- 3-year warranty is standard for the category
Good fit if
- You own a Tundra CrewMax
- You want a 500 lb load rating
- You prefer no-drill bolt-on installation
Skip if
- You drive a Tundra Double Cab
- You need a higher step height
- You want a different color finish
Verdict: Tyger Auto Trax Tundra Side Steps provide a sturdy 500 lb rated step for Tundra CrewMax owners who want a durable, no-drill bolt-on solution.
Specifications side by side
| Spec | Tyger Auto Trax Side Steps Tundra CrewMax |
|---|---|
| Compatible Vehicle | 2007-2021 Toyota Tundra |
| Cab Size | CrewMax |
| Material | Carbon steel |
| Step Width | 6.3 inches |
| Tube Shape | Dual-tubular |
| Installation | Bolt-on, no drilling required |
| Finish | Textured black powder E-coating |
| Weight Capacity | 500 lb |
| Compatible Truck | Toyota Tundra |
| Style | Side Steps |
| Dimensions | 84.9 × 6.3 × 2.36 inches |
| Weight | 51.3 pounds |
| Size | Tundra CrewMax (2nd Gen) |
| Color | Textured Black |
| Model | TG-TX7T29798 |
Frequently asked questions
Does the Tyger Auto Trax fit a Toyota Tundra Double Cab?
No, this product is designed exclusively for the Tundra CrewMax. The listing specifies compatibility only with the CrewMax cab that features four full-size doors. It will not fit the Double Cab variant. You must verify your exact cab style before purchasing to ensure proper fitment.
What are the exact dimensions of the Tyger Auto Trax side steps?
The steps measure 84.9 inches in length, 6.3 inches in width, and 2.36 inches in height. These dimensions apply to the Tundra CrewMax (2nd Gen) model. The width provides a stable footing surface, while the height is engineered to assist with entry and exit from the truck bed.
How much do the Tyger Auto Trax side steps weigh?
The total weight is 51.3 pounds. This figure represents the combined mass of both side steps. The construction uses heavy-duty 2-inch carbon steel, which contributes to this substantial weight. This mass helps ensure stability and durability during daily use on the vehicle.
What is the load capacity for each Tyger Auto Trax side step?
Each side step supports a maximum static load of 500 pounds. This rating indicates the safe weight limit for standing on the bar. You can rely on this capacity for multiple passengers or heavy gear placement. The dual-tubular carbon steel design supports this high weight rating.
What finish does the Tyger Auto Trax side step have?
The steps feature a textured black powder E-coating finish. This coating is applied to the carbon steel construction to resist rust and corrosion. The textured surface also provides better traction for footwear compared to smooth surfaces. This finish is consistent across the entire side step unit.
What model number identifies the Tyger Auto Trax for Tundra CrewMax?
The specific model number is TG-TX7T29798. This identifier corresponds to the version designed for the Tundra CrewMax (2nd Gen). Using this number helps you verify you are looking at the correct product variant. It ensures compatibility with your specific truck generation and cab style.