Tyger Auto Trax Side Steps Tundra vs Tyger Auto Access Running Boards 4Runner: Spec Comparison
As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.
You are comparing tyger auto trax side steps compatible vs tyger access running boards for your Toyota truck. Both products share a 500 lb weight capacity, carbon steel construction, and a textured black finish. The main difference lies in their design and fitment. The Access line uses a single-tube drop step for the 4Runner, while the Trax series features a dual-tube side step for the Tundra. You will see distinct variations in step width and ground clearance between these two specific models.
Key differences
| Aspect | Tyger Auto Access Running Boards for 4Runner | Tyger Auto Trax Side Steps Tundra CrewMax |
|---|---|---|
| Compatible Vehicle | 2010-2024 Toyota 4Runner | 2007-2021 Toyota Tundra CrewMax |
| Structure | Single tubular | Dual-tubular |
| Step Width | 2 inches | 6.3 inches |
| Ground Clearance | Approximately 10 in | Approximately 15 in |
| Finish | Textured black | Textured black powder E-coating |
Which one should you choose?
Choose Tyger Auto Access Running Boards for 4Runner if
- You drive a 2010-2024 Toyota 4Runner and need a standard drop step.
- You prefer a narrower 2-inch step surface for a lower profile.
- You want a lighter unit at 38 pounds for easier handling.
Choose Tyger Auto Trax Side Steps Tundra CrewMax if
- You own a 2007-2021 Toyota Tundra CrewMax.
- You need extra ground clearance of approximately 15 inches.
- You prefer a wider 6.3-inch step for easier footing.
Verdict: The Tyger Access running boards are the practical choice for 4Runner owners seeking a lightweight, single-tube step. The Tyger Trax side steps suit Tundra CrewMax drivers who need higher ground clearance and a wider, dual-tube platform. Select the model that matches your specific vehicle and step width preference.
Trax vs Access Side Step Specs
step width
The Tyger Auto Trax Side Steps for the Tundra offer a 6.3 inch step width. This wider surface provides more room for your boot placement when entering or exiting the vehicle. In contrast, the Tyger Auto Access Running Boards for the 4Runner have a narrower 7.4 inch overall width but a 2 inch tube diameter. The Access model uses a single tube design, while the Trax features a dual-tubular structure. The Trax gives you a broader platform to step on, which can improve stability. The Access model prioritizes a sleeker profile with its single tube. You should consider how much foot space you prefer for daily use.
ground clearance
Ground clearance is a critical spec for off-road capability and obstacle negotiation. The Tyger Auto Trax Side Steps provide approximately 15 inches of ground clearance. This higher profile helps you clear larger rocks and ruts without damaging the side steps. The Tyger Auto Access Running Boards sit lower, offering about 10 inches of ground clearance. While the Access model keeps the vehicle closer to the ground, it offers less protection against terrain hazards. If you plan to drive on rough trails, the Trax gives you a significant advantage. The lower stance of the Access is better for highway stability.
tube structure
Both products use heavy-duty carbon steel, but their structural designs differ. The Tyger Auto Trax Side Steps utilize a robust dual-tube structure. This design molds two 2-inch tubes together for enhanced rigidity and a distinct look. The Tyger Auto Access Running Boards feature a single 2-inch diameter tube. This creates a seamless tubular frame that is described as straightforward and durable. The dual-tube design of the Trax may offer slightly more lateral stiffness. The single tube of the Access is lighter and simpler. Both finishes are textured black to resist corrosion and rust effectively.
weight capacity
When comparing load bearing capabilities, both products perform equally well. The Tyger Auto Trax Side Steps for the Tundra support up to 500 lb. The Tyger Auto Access Running Boards for the 4Runner also support a maximum of 500 lb. This shared capacity ensures that both products can handle the weight of an average adult stepping on them safely. Neither product offers a higher limit than the other. You can rely on either set of steps for standard entry and exit duties. The structural integrity of both carbon steel frames is built to meet this standard requirement.
installation time
Installation speed is a practical concern for many buyers. Both products are designed for easy bolt-on installation without drilling. The Tyger Auto Trax Side Steps include all necessary hardware and brackets to mount onto the rocker panel. The manufacturer states that installation can be completed in approximately 20 minutes. Similarly, the Tyger Auto Access Running Boards also require about 20 minutes for installation. Both kits include driver and passenger side bars. The process is straightforward for both, requiring no special tools beyond standard wrenches. You can expect a quick and hassle-free setup for either product.
Choose the right step for your truck
4Runner owners needing a budget-friendly step
The Tyger Auto Access Running Boards fit your 2010-2024 4Runner with a 5.76 inch height. This lower drop makes climbing into your vehicle easier than the higher Trax steps. You get a 500 lb weight capacity and a textured black finish that resists rust. The 2 inch tube design offers a straightforward look. Installation takes about 20 minutes with included hardware.
Tundra CrewMax owners wanting wider footing
The Tyger Auto Trax Side Steps provide a 6.3 inch wide step for your 2007-2021 Tundra CrewMax. This wider surface gives you more room for your boots when entering or exiting. The dual-tubular carbon steel construction supports up to 500 lbs. You get a textured black powder E-coating finish for corrosion resistance. Ground clearance sits at approximately 15 inches.
Drivers prioritizing ground clearance for off-road
If you need extra space under your truck, the Trax Side Steps offer approximately 15 inches of ground clearance. This is significantly higher than the Access Running Boards, which sit at 10 inches. Both steps use heavy-duty carbon steel and support 500 lbs. The Trax design is built for the Tundra CrewMax cab. You get a robust dual-tube structure for stability.
The products compared
Tyger Auto Access Running Boards for 4Runner
Best for: standard 4Runner models needing heavy-duty support
- Material
- carbon steel
- Step Width
- 2 inches
- Tube Shape
- tubular
- Installation
- bolt-on
- Finish
- textured black
- Weight Capacity
- 500 lb
View on Amazon: Tyger Auto Access Running Boards for 4Runner Affiliate link
These Tyger Auto Access running boards fit 2010-2024 Toyota 4Runner models, excluding Limited, Nightshade, and TRD Sport variants. They feature a 2-inch tubular carbon steel frame with a textured black finish. The step width is 7.4 inches, providing a stable platform. They support up to 500 pounds and sit approximately 10 inches above the ground. Installation is a straightforward bolt-on process that takes about 20 minutes.
Pros
- Heavy-duty 2-inch carbon steel tube construction
- 500 lb weight capacity for safe loading
- Textured black finish resists corrosion and rust
- Bolt-on installation completes in roughly 20 minutes
Cons
- Excludes Limited, Nightshade, and TRD Sport models
- Requires confirmed fitment for SR5 and extended rocker panels
- Basic drop step design lacks aesthetic flair
Good fit if
- You need a durable, high-capacity step for daily use
- You want a straightforward bolt-on installation without complex wiring
- You drive a standard 4Runner without special rocker cladding
Skip if
- You own a Limited, Nightshade, or TRD Sport 4Runner
- You require a wider step surface for easier entry
- You prefer a sleek, low-profile step design over tubular frames
Verdict: Tyger Auto Access 4Runner Drop Steps offer robust support for standard 4Runner owners. They are ideal for drivers who prioritize load capacity and simple installation over advanced styling features.
Tyger Auto Trax Side Steps Tundra CrewMax
Best for: Tundra CrewMax owners needing heavy-duty steps
- Compatible Vehicle
- 2007-2021 Toyota Tundra
- Cab Size
- CrewMax
- Material
- Carbon steel
- Step Width
- 6.3 inches
- Tube Shape
- Dual-tubular
- Installation
- Bolt-on, no drilling required
View on Amazon: Tyger Auto Trax Side Steps Tundra CrewMax Affiliate link
These Tyger Auto Trax side steps are built for the 2007-2021 Toyota Tundra CrewMax. They use a dual-tubular carbon steel design with a textured black powder E-coating finish. The steps offer a 500 lb weight capacity and sit 15 inches off the ground. Installation is bolt-on with no drilling. This is a practical option for CrewMax owners needing sturdy, heavy-duty access.
Pros
- 500 lb weight capacity for safe loading
- Dual-tubular carbon steel construction for durability
- Textured black powder E-coating resists rust
- Bolt-on installation requires no drilling
Cons
- Only fits CrewMax cab size
- No remote or app control included
- Limited to 15 inches ground clearance
Good fit if
- You drive a Toyota Tundra CrewMax
- You need a 500 lb load rating
- You prefer bolt-on installation
Skip if
- You drive a Tundra Double Cab
- You want a higher step height
- You need electronic controls
Verdict: Tyger Auto Trax Side Steps Tundra CrewMax provides a sturdy, 500 lb rated step for CrewMax owners who want a no-drill bolt-on solution. It suits those prioritizing heavy-duty carbon steel construction over aesthetic height.
Specifications side by side
| Spec | Tyger Auto Access Running Boards for 4Runner | Tyger Auto Trax Side Steps Tundra CrewMax |
|---|---|---|
| Compatible Vehicle | not stated | 2007-2021 Toyota Tundra |
| Cab Size | not stated | CrewMax |
| Material | carbon steel | Carbon steel |
| Step Width | 2 inches | 6.3 inches |
| Tube Shape | tubular | Dual-tubular |
| Installation | bolt-on | Bolt-on, no drilling required |
| Finish | textured black | Textured black powder E-coating |
| Weight Capacity | 500 lb | 500 lb |
| Compatible Truck | not stated | Toyota Tundra |
| Style | Drop Step | Side Steps |
| Dimensions | 68 × 7.4 × 5.76 inches | 84.9 × 6.3 × 2.36 inches |
| Weight | 38 pounds | 51.3 pounds |
| Size | 2010-2024 4Runner | Tundra CrewMax (2nd Gen) |
| Color | Textured Black | Textured Black |
| Model | TG-AS2T24034 | TG-TX7T29798 |
Frequently asked questions
Which Tyger Auto step is better for a 4Runner?
The Tyger Auto Access Running Boards are the correct choice for 4Runner owners. They are specifically designed for 2010-2024 4Runner models. The step height is 5.76 inches, which aids easier entry. This model offers a 7.4-inch width for stable footing. It weighs 38 pounds and features a textured black finish.
Do the Tyger Auto Trax steps fit a standard Tundra?
No, the Tyger Auto Trax Side Steps are built for the Tundra CrewMax. They are compatible with the second-generation CrewMax cab. The step length is 84.9 inches to match this specific body style. Standard Tundra models require a different fitment. Always verify your cab type before purchasing.
What is the step width difference between the two models?
The Access step for the 4Runner is 7.4 inches wide. The Trax step for the Tundra is 6.3 inches wide. The wider Access step provides a larger surface area for your foot. This can offer more stability when climbing into your vehicle. Both steps use carbon steel for durability.
How much do the Tyger Auto steps weigh?
The Tyger Auto Access Running Boards weigh 38 pounds. The Tyger Auto Trax Side Steps are heavier at 51.3 pounds. The weight difference reflects their specific length and construction. Both products use carbon steel to ensure strength. Heavier steps often provide a more solid feel underfoot.
Are these steps made of aluminum or steel?
Both the Access and Trax lines are constructed from carbon steel. This material choice provides heavy-duty support for your entry needs. The finish on both is a textured black coating. This helps resist scratches and adds a rugged look to your truck or SUV.
What is the height of the Access running board?
The Tyger Auto Access Running Boards have a height of 5.76 inches. This drop height is designed to make entering your 4Runner easier. It is lower than the Trax step height of 2.36 inches above the rocker panel. The lower position reduces the climb distance.
Can I use the Trax steps on a 4Runner?
No, you cannot use the Trax steps on a 4Runner. The Trax Side Steps are engineered specifically for the Tundra CrewMax. They have a length of 84.9 inches and a width of 6.3 inches. The Access Running Boards are the only option listed for the 4Runner platform.
What is the model number for the 4Runner steps?
The model number for the Tyger Auto Access Running Boards is TG-AS2T24034. This identifies the specific step for your 2010-2024 4Runner. The Trax Side Steps for the Tundra use model TG-TX7T29798. Using the correct model number ensures proper fitment.