Tyger Auto or YITAMOTOR? Running Boards Compared in 2026
As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.
When comparing the tyger auto vs YITAMOTOR running board options for your Silverado or Sierra, you face two distinct approaches. Both brands offer no-drill installation for Crew Cab models. The main difference lies in construction and step size. Tyger Auto uses carbon steel with a textured finish and a narrower 3.5-inch step. YITAMOTOR opts for polished stainless steel with a wider 6.5-inch pad. Your choice depends on whether you prioritize rugged durability or easy footing.
Key differences
| Aspect | Tyger Auto 3.5" Rider Running Boards | YITAMOTOR 6.5" Stainless Steel Running Boards |
|---|---|---|
| Material | Carbon steel | Stainless steel |
| Finish | E-coating heavy textured powder finish | Polished |
| Step Width | 3.5 inches | 6.5 inches |
| Weight Capacity | 500 lb | 450 lb |
| Tube Shape | Oval | not listed |
Which one should you choose?
Choose Tyger Auto 3.5" Rider Running Boards if
- You want the highest weight capacity for heavier loads.
- You prefer a textured, rust-resistant powder coat finish over shiny metal.
- You want a wider step pad surface for better stability.
Choose YITAMOTOR 6.5" Stainless Steel Running Boards if
- You want a wider 6.5-inch step for easier entry and exit.
- You prefer the look and longevity of polished stainless steel.
- You want a product that resists rust through its natural material properties.
Verdict: Choose the Tyger Auto model if you need maximum load capacity and a rugged, textured finish. Select the YITAMOTOR option if you prioritize a wider step surface and the classic look of polished stainless steel. Both fit your Crew Cab without drilling.
Tyger Auto vs YITAMOTOR Running Boards
Step width
The Tyger Auto 3.5" Rider offers a 3.5-inch step pad surface, which is wider than its round tube counterparts. This design aims to provide greater stability and a secure footing for you when entering or exiting your vehicle. In contrast, the YITAMOTOR model features a significantly broader 6.5-inch non-slip step pad. This wider surface area allows for easier movement, including stepping in, out, or even jumping, as noted in the product details. The larger footprint on the YITAMOTOR unit provides more room for your boots, reducing the chance of slipping off the edge during daily use. For many drivers, that extra width translates to a more confident step, especially in wet or snowy conditions.
Material and finish
Construction materials differ significantly between these two options. The Tyger Auto running boards are built from carbon steel tubes. They feature a seamless end-to-end design with an E-coating and heavy textured powder finish. This combination is designed to keep dirt and water away while providing superior rust and corrosion protection. The YITAMOTOR boards are made from stainless steel with a polished finish. The product data highlights that stainless steel offers a longer lifespan compared to normal steel step bars due to its rust-resistant properties. While both finishes protect against the elements, the material choice affects weight and long-term durability. Carbon steel is typically heavier but strong, whereas stainless steel resists corrosion naturally without relying solely on coatings.
Weight capacity
When you need to support your weight or that of a passenger, the load limits matter. The Tyger Auto running boards are rated for a weight capacity of 500 lb. This rating applies to the structural integrity of the carbon steel tube and mounting hardware. The YITAMOTOR running boards have a stated weight capacity of 450 lb. They utilize four brackets on each side to provide strength and durability. Both capacities are sufficient for most average adults and children. However, if you carry heavier loads or have larger passengers, the Tyger Auto option provides a higher margin of safety. The 50 lb difference may seem small, but it represents a distinct advantage in structural tolerance for the Tyger Auto model.
Installation method
Both brands emphasize ease of installation for your Silverado or Sierra. The Tyger Auto product includes all necessary hardware to mount onto the rocker panel and requires no drilling. The YITAMOTOR model also offers bolt-on installation with no drilling required, noting that factory holes align perfectly with the mounts. YITAMOTOR suggests it is possible to install in less than an hour, though professional installation is recommended. Tyger Auto states that all hardware is included for easy installation. Since both options avoid permanent modifications to your truck's body, you can remove them if needed. The process is similar for both, relying on pre-drilled factory points or compatible mounting brackets included in the package.
Ground clearance
Ground clearance affects your truck's ability to handle rough terrain without scraping the running boards. The Tyger Auto running boards provide approximately 12 inches of ground clearance. This height helps protect the steps from rocks and debris while maintaining a manageable step-up height. The YITAMOTOR product data does not explicitly state a ground clearance measurement. However, the overall dimensions and bracket design imply a different profile. Without a specific clearance figure for the YITAMOTOR model, you cannot directly compare the off-road capability or protection level. The Tyger Auto specification gives you a clear metric to evaluate against your truck's existing height and your driving habits.
Warranty
Manufacturer support can be important if issues arise. The Tyger Auto running boards are backed by a 3-year warranty for US customers against manufacturing defects. This coverage provides peace of mind regarding the build quality and finish durability over time. The YITAMOTOR product data does not mention a specific warranty period or terms. While the stainless steel construction suggests longevity, the lack of stated warranty information makes it difficult to compare long-term support. For buyers who prioritize a guaranteed period of coverage against defects, the Tyger Auto offer is more transparent and defined.
Which Running Board Fits Your Needs
You want maximum step stability
The Tyger Auto model features a 3.5-inch oval tube design. This wider step pad provides greater stability compared to round tubes. The carbon steel construction includes a heavy textured powder finish. This seamless build offers superior rust protection. You get a secure footing when entering or exiting your truck.
You prefer a polished look
The YITAMOTOR running boards are made from stainless steel with a polished finish. This material choice aims for a longer lifespan and a distinct aesthetic. The 6.5-inch non-slip step pad is wider than the Tyger option. The chrome appearance complements many truck styles while providing durable side steps.
You need heavy load support
The Tyger Auto running boards support up to 500 lb. This capacity exceeds the 450 lb limit of the YITAMOTOR alternative. The four-bracket design on each side adds strength and durability. You can rely on these steps for heavier use. The no-drill installation makes adding this robust support straightforward for your vehicle.
The products compared
Tyger Auto 3.5" Rider Running Boards
Best for: Crew Cab trucks needing wide, stable steps
- Compatible Vehicle
- 2019-2026 Silverado / Sierra 1500
- Cab Size
- Crew Cab
- Material
- Carbon steel
- Step Width
- 3.5 inch
- Tube Shape
- Oval
- Installation
- No drilling required
View on Amazon: Tyger Auto 3.5" Rider Running Boards Affiliate link
These Tyger Auto running boards feature a 3.5-inch oval tube step pad for a wider, more stable footing. Constructed from carbon steel with a textured powder finish, they resist rust and corrosion. The 500 lb weight capacity supports heavy use, while the no-drill installation keeps your truck’s body intact. They fit 2019-2026 Silverado and Sierra Crew Cabs.
Pros
- 3.5-inch wide oval step pad for enhanced stability
- 500 lb weight capacity for durable support
- Seamless carbon steel construction with E-coating
- No drilling required for installation
Cons
- 41.9 lb weight may complicate solo installation
- 12-inch ground clearance may limit off-road clearance
- Excludes 2019 LD and Limited models
Good fit if
- You want a wider step surface for easier entry
- You need high weight capacity for heavy gear
- You prefer a rust-resistant powder finish
Skip if
- You drive a 2019 LD or Limited model
- You require maximum off-road ground clearance
- You want a lighter unit for easier handling
Verdict: Tyger Auto 3.5" Oval Running Boards offer a stable, wide step for daily drivers who value durability and high weight capacity over extreme off-road clearance.
YITAMOTOR 6.5" Stainless Steel Running Boards
Best for: Crew Cab trucks needing durable stainless steel steps
- Compatible Vehicle
- 2019-2026 Silverado/Sierra 1500
- Cab Size
- Crew Cab
- Material
- Stainless Steel
- Step Width
- 6.5-inch
- Installation
- Bolt-on, no drilling required
- Finish
- Polished
View on Amazon: YITAMOTOR 6.5" Stainless Steel Running Boards Affiliate link
These YITAMOTOR running boards are built from polished stainless steel to resist rust. They feature a 6.5-inch wide step pad with a 450 lb weight capacity. The bolt-on design uses four brackets per side and requires no drilling. They fit 2019-2026 Chevy Silverado and GMC Sierra Crew Cabs. This setup offers a sturdy step for daily entry and exit.
Pros
- Polished stainless steel construction resists rust
- 6.5-inch non-slip step pad provides ample footing
- 450 lb weight capacity supports heavy use
- Bolt-on installation aligns with factory holes
Cons
- Heavier at 53.5 pounds per pair
- Limited to Crew Cab models only
- Professional installation is recommended for best results
Good fit if
- You want a rust-resistant stainless steel step
- You need a wide 6.5-inch step pad
- You drive a Crew Cab Silverado or Sierra
Skip if
- You drive an Extended Cab truck
- You prefer a lighter aluminum build
- You need a step for a Double Cab
Verdict: YITAMotor Stainless Steel Running Boards provide a heavy-duty, rust-resistant step for Crew Cab owners. You should choose this if you prioritize material durability and a wide, stable platform for climbing into your truck.
Specifications side by side
| Spec | Tyger Auto 3.5" Rider Running Boards | YITAMOTOR 6.5" Stainless Steel Running Boards |
|---|---|---|
| Compatible Vehicle | 2019-2026 Silverado / Sierra 1500 | 2019-2026 Silverado/Sierra 1500 |
| Cab Size | Crew Cab | Crew Cab |
| Material | Carbon steel | Stainless Steel |
| Step Width | 3.5 inch | 6.5-inch |
| Tube Shape | Oval | not stated |
| Installation | No drilling required | Bolt-on, no drilling required |
| Finish | E-coating textured powder finish | Polished |
| Weight Capacity | 500 lb. | 450 lb. |
| Compatible Truck | Chevy Silverado, GMC Sierra | Chevy Silverado, GMC Sierra |
| Width | 3.5-Inch | 6 inches |
| Style | Nerf Bars | Side Steps |
| Dimensions | 86.8 × 2.95 × 4.61 inches | 82 × 6 × 2 inches |
| Weight | 41.9 pounds | 53.5 pounds |
| Size | Silverado / Sierra Crew Cab (4th Gen) | 6.5 inches |
| Color | Black | Chrome-6.5in |
| Model | TG-SS2C35068 | J9KNPJ0 |
Frequently asked questions
Which running board is heavier, Tyger Auto or YITAMOTOR?
The YITAMOTOR stainless steel model is heavier. It weighs 53.5 pounds. The Tyger Auto 3.5-inch Rider weighs 41.9 pounds. The extra weight in the YITAMOTOR unit comes from its solid stainless steel construction. This adds durability but makes the part significantly more massive than the carbon steel Tyger Auto option.
Do these running boards fit Chevy Silverado and GMC Sierra trucks?
Yes, both options are compatible with these brands. The Tyger Auto model fits the 4th generation Silverado and Sierra Crew Cab. The YITAMOTOR stainless steel step is also listed for Chevy Silverado and GMC Sierra Crew Cab models. You should verify your specific truck year and cab size before purchasing.
What is the difference in step width between the two brands?
The YITAMOTOR board offers a wider step surface. It provides a 6-inch wide platform. The Tyger Auto 3.5-inch Rider has a narrower step pad. While the Tyger Auto tube is 3.5 inches wide, the actual standing surface is smaller than the YITAMOTOR stainless steel option. This makes the YITAMOTOR step feel more substantial.
Which running board has a larger overall length?
The Tyger Auto model is longer. It measures 86.8 inches in length. The YITAMOTOR stainless steel board is 82 inches long. The Tyger Auto unit extends further along the truck bed side. This difference may affect how the board aligns with your specific truck bed and cab gaps.
Is the Tyger Auto running board made of stainless steel?
No, the Tyger Auto 3.5-inch Rider is not stainless steel. It is constructed from carbon steel. The YITAMOTOR model, however, is made from stainless steel. Carbon steel is typically coated with a textured powder finish for protection. Stainless steel offers inherent rust resistance without relying solely on a surface coating.
What are the height dimensions of these running boards?
The Tyger Auto board has a total height of 4.61 inches. The YITAMOTOR board has a height of 2 inches. These measurements refer to the overall vertical dimension of the installed unit. The difference in height affects the step-up angle you experience when entering or exiting your truck cab.
Can I install these running boards without drilling my truck?
Yes, both brands offer no-drill installation for compatible Crew Cab models. You do not need to drill holes into your truck bed or frame for either option. The mounting systems are designed to clamp or bolt onto existing factory points. This allows for a reversible installation that preserves your truck's original structure.